Plungers - Ball Threaded - With Limit Switch

Plungers -> Ball Threaded -> With Limit Switch

There are 6 products in the sub-categories of Plungers - Ball Threaded - With Limit Switch. Browse the Plungers - Ball Threaded - With Limit Switch products table.

Category Details

A selection of With Limit Switch Ball Threaded Plungers. Suitable for locking and releasing a device by using a built-in electrical switch. Stainless steel spring, nickel plated body, hardened steel ball.

  • Spring-loaded mechanical component with a threaded body, used for locating, securing, or applying pressure.
  • When pressure is applied to the ball, it compresses the internal spring and can be temporarily pushed into the body, allowing parts to be moved, and then it springs back to its original position to hold them in place.
  • Supply Cable : Grey for normally open contacts, black for normally closed. Oil resistant. Max tensile load 20N.
  • Working Temperature: -10 deg C to 80 deg C.
  • Electrical Supply : 20 mA DC Max. Switching load recommended 5-10 mA.
  • Voltage : 12-24V Supply Cable 3mm - 2 Phase, 2 metres long.
  • Safety Standard : IP40 Average Switch Life Span : 3 milliion switchings

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Plungers - Ball Threaded - With Limit Switch category on the Small Parts & Bearings online store.
Thread Size (D) Body Length (L) Initial Pressure (F1) Final Pressure (F2) Ball Diameter (D1) Ball Height (H) Indicative
Image
Ball Threaded Plungers - M6 - 6x1mm - 27 mm - 6 N With Limit Switch - Steel Nickel Plated Plunger
Thread Size (D)
M6 (6x1mm)
Body Length (L)
27.0
mm
Initial Pressure (F1)
6.0
N
Final Pressure (F2)
13.0
N
Ball Diameter (D1)
3.0
mm
Ball Height (H)
0.8
mm
Ball Threaded Plungers - M6 - 6x1mm - 27 mm - 6 N With Limit Switch - Steel Nickel Plated
Material: Steel Nickel Plated    Contact: Normally Closed    Contact Distance (l2): 0.3   
Part Number: PLBT-060M-200-LC-013 (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Aug 15, 2026
$278.23 AUD
$278.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (D) Body Length (L) Initial Pressure (F1) Final Pressure (F2) Indicative
Image
Ball Threaded Plungers - M6 - 6x1mm - 27 mm - 6 N With Limit Switch - Steel Nickel Plated Plunger
Thread Size (D)
M6 (6x1mm)
Body Length (L)
27.0
mm
Initial Pressure (F1)
6.0
N
Final Pressure (F2)
13.0
N
Ball Threaded Plungers - M6 - 6x1mm - 27 mm - 6 N With Limit Switch - Steel Nickel Plated
Material: Steel Nickel Plated    Ball Diameter (D1): 3.0 mm    Ball Height (H): 0.8 mm    Contact: Normally Closed    Contact Distance (l2): 0.3   
Part Number: PLBT-060M-200-LC-013 (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Aug 15, 2026
$278.23 AUD
$278.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Ball Threaded Plungers - M6 - 6x1mm - 27 mm - 6 N With Limit Switch - Steel Nickel Plated Plunger
Thread Size (D)
M6 (6x1mm)
Body Length (L)
27.0
mm
Initial Pressure (F1)
6.0
N
Final Pressure (F2)
13.0
N
Ball Diameter (D1)
3.0
mm
Ball Height (H)
0.8
mm
Ball Threaded Plungers - M6 - 6x1mm - 27 mm - 6 N With Limit Switch - Steel Nickel Plated
Material: Steel Nickel Plated    Contact: Normally Open    Contact Distance (l2): 0.3   
Part Number: PLBT-060M-200-LO-013 (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Aug 15, 2026
$235.59 AUD
$282.71 AUD $235.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Ball Threaded Plungers - M6 - 6x1mm - 27 mm - 6 N With Limit Switch - Steel Nickel Plated Plunger
Thread Size (D)
M6 (6x1mm)
Body Length (L)
27.0
mm
Initial Pressure (F1)
6.0
N
Final Pressure (F2)
13.0
N
Ball Threaded Plungers - M6 - 6x1mm - 27 mm - 6 N With Limit Switch - Steel Nickel Plated
Material: Steel Nickel Plated    Ball Diameter (D1): 3.0 mm    Ball Height (H): 0.8 mm    Contact: Normally Open    Contact Distance (l2): 0.3   
Part Number: PLBT-060M-200-LO-013 (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Aug 15, 2026
$235.59 AUD
$282.71 AUD $235.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Ball Threaded Plungers - M8 - 8x1.25mm - 30 mm - 8 N With Limit Switch - Steel Nickel Plated Plunger
Thread Size (D)
M8 (8x1.25mm)
Body Length (L)
30.0
mm
Initial Pressure (F1)
8.0
N
Final Pressure (F2)
16.0
N
Ball Diameter (D1)
4.0
mm
Ball Height (H)
1.0
mm
Ball Threaded Plungers - M8 - 8x1.25mm - 30 mm - 8 N With Limit Switch - Steel Nickel Plated
Material: Steel Nickel Plated    Contact: Normally Open    Contact Distance (l2): 0.5   
Part Number: PLBT-080M-230-LO-016 (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Aug 15, 2026
$235.68 AUD
$282.82 AUD $235.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Ball Threaded Plungers - M8 - 8x1.25mm - 30 mm - 8 N With Limit Switch - Steel Nickel Plated Plunger
Thread Size (D)
M8 (8x1.25mm)
Body Length (L)
30.0
mm
Initial Pressure (F1)
8.0
N
Final Pressure (F2)
16.0
N
Ball Threaded Plungers - M8 - 8x1.25mm - 30 mm - 8 N With Limit Switch - Steel Nickel Plated
Material: Steel Nickel Plated    Ball Diameter (D1): 4.0 mm    Ball Height (H): 1.0 mm    Contact: Normally Open    Contact Distance (l2): 0.5   
Part Number: PLBT-080M-230-LO-016 (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Aug 15, 2026
$235.68 AUD
$282.82 AUD $235.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Ball Threaded Plungers - M8 - 8x1.25mm - 30 mm - 8 N With Limit Switch - Steel Nickel Plated Plunger
Thread Size (D)
M8 (8x1.25mm)
Body Length (L)
30.0
mm
Initial Pressure (F1)
8.0
N
Final Pressure (F2)
16.0
N
Ball Diameter (D1)
4.0
mm
Ball Height (H)
1.0
mm
Ball Threaded Plungers - M8 - 8x1.25mm - 30 mm - 8 N With Limit Switch - Steel Nickel Plated
Material: Steel Nickel Plated    Contact: Normally Closed    Contact Distance (l2): 0.5   
Part Number: PLBT-080M-230-LC-016 (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Aug 15, 2026
$236.50 AUD
$283.80 AUD $236.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Ball Threaded Plungers - M8 - 8x1.25mm - 30 mm - 8 N With Limit Switch - Steel Nickel Plated Plunger
Thread Size (D)
M8 (8x1.25mm)
Body Length (L)
30.0
mm
Initial Pressure (F1)
8.0
N
Final Pressure (F2)
16.0
N
Ball Threaded Plungers - M8 - 8x1.25mm - 30 mm - 8 N With Limit Switch - Steel Nickel Plated
Material: Steel Nickel Plated    Ball Diameter (D1): 4.0 mm    Ball Height (H): 1.0 mm    Contact: Normally Closed    Contact Distance (l2): 0.5   
Part Number: PLBT-080M-230-LC-016 (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Aug 15, 2026
$236.50 AUD
$283.80 AUD $236.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Ball Threaded Plungers - M10 - 10x1.5mm - 33 mm - 10 N With Limit Switch - Steel Nickel Plated Plunger
Thread Size (D)
M10 (10x1.5mm)
Body Length (L)
33.0
mm
Initial Pressure (F1)
10.0
N
Final Pressure (F2)
20.0
N
Ball Diameter (D1)
5.0
mm
Ball Height (H)
1.2
mm
Ball Threaded Plungers - M10 - 10x1.5mm - 33 mm - 10 N With Limit Switch - Steel Nickel Plated
Material: Steel Nickel Plated    Contact: Normally Open    Contact Distance (l2): 0.7   
Part Number: PLBT-100M-270-LO-020 (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Aug 15, 2026
$248.77 AUD
$298.53 AUD $248.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Ball Threaded Plungers - M10 - 10x1.5mm - 33 mm - 10 N With Limit Switch - Steel Nickel Plated Plunger
Thread Size (D)
M10 (10x1.5mm)
Body Length (L)
33.0
mm
Initial Pressure (F1)
10.0
N
Final Pressure (F2)
20.0
N
Ball Threaded Plungers - M10 - 10x1.5mm - 33 mm - 10 N With Limit Switch - Steel Nickel Plated
Material: Steel Nickel Plated    Ball Diameter (D1): 5.0 mm    Ball Height (H): 1.2 mm    Contact: Normally Open    Contact Distance (l2): 0.7   
Part Number: PLBT-100M-270-LO-020 (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Aug 15, 2026
$248.77 AUD
$298.53 AUD $248.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Ball Threaded Plungers - M10 - 10x1.5mm - 33 mm - 10 N With Limit Switch - Steel Nickel Plated Plunger
Thread Size (D)
M10 (10x1.5mm)
Body Length (L)
33.0
mm
Initial Pressure (F1)
10.0
N
Final Pressure (F2)
20.0
N
Ball Diameter (D1)
5.0
mm
Ball Height (H)
1.2
mm
Ball Threaded Plungers - M10 - 10x1.5mm - 33 mm - 10 N With Limit Switch - Steel Nickel Plated
Material: Steel Nickel Plated    Contact: Normally Closed    Contact Distance (l2): 0.7   
Part Number: PLBT-100M-270-LC-020 (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Aug 15, 2026
$248.77 AUD
$298.53 AUD $248.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Ball Threaded Plungers - M10 - 10x1.5mm - 33 mm - 10 N With Limit Switch - Steel Nickel Plated Plunger
Thread Size (D)
M10 (10x1.5mm)
Body Length (L)
33.0
mm
Initial Pressure (F1)
10.0
N
Final Pressure (F2)
20.0
N
Ball Threaded Plungers - M10 - 10x1.5mm - 33 mm - 10 N With Limit Switch - Steel Nickel Plated
Material: Steel Nickel Plated    Ball Diameter (D1): 5.0 mm    Ball Height (H): 1.2 mm    Contact: Normally Closed    Contact Distance (l2): 0.7   
Part Number: PLBT-100M-270-LC-020 (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Aug 15, 2026
$248.77 AUD
$298.53 AUD $248.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.