Gears - Spur - Standard - Module 0.4 - Plastic - Standard

Gears -> Spur -> Standard -> Module 0.4 -> Plastic -> Standard

There are 4 products in the sub-categories of Gears - Spur - Standard - Module 0.4 - Plastic - Standard. Browse the Gears - Spur - Standard - Module 0.4 - Plastic - Standard products table.

Category Details

A selection of Standard Plastic Module 0.4 Standard Spur Gears. PCD in mm = No. of Teeth x 0.4. 20 Degree Pressure Angle.

  • The diameter increases by 0.4mm per tooth
  • Module 0.4. Approximately 1.26mm between the teeth.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Gears - Spur - Standard - Module 0.4 - Plastic - Standard category on the Small Parts & Bearings online store.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Type Indicative
Image
Number of Teeth
15

Pitch Circle Diameter (PD)
6.00
mm

(Equiv. 0.236 in.)
Bore (d)
3.000
mm

(Equiv. 0.118 in.)
Outside Diameter (OD)
6.800
mm
Face Width (FW)
5.000
mm
Type
Hubbed
Spur Gears - 15 tooth - 6x3 mm Hubbed - Acetal - No Insert Gear
Material: Acetal - No Insert    Hub Diameter (D1): 5.50 mm    Hub Projection (HL): 7.00 mm    Locking Method: None    Quality: ISO 8 (AGMA 9)   
Part Number: G006B-015-M04-050-030-A-P (10 Pcs)
Spur Gears - 15 tooth - 6x3 mm Hubbed - Acetal - No Insert Gear
1 pack (10 pcs) Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$9.00 AUD
$17.10 AUD $9.00 AUD
Per 10
Quantity Required

1 pack (10 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
Number of Teeth
15

Pitch Circle Diameter (PD)
6.00
mm

(Equiv. 0.236 in.)
Bore (d)
3.000
mm

(Equiv. 0.118 in.)
Outside Diameter (OD)
6.800
mm
Spur Gears - 15 tooth - 6x3 mm Hubbed - Acetal - No Insert Gear
Material: Acetal - No Insert    Face Width (FW): 5.000 mm    Type: Hubbed    Hub Diameter (D1): 5.50 mm    Hub Projection (HL): 7.00 mm    Locking Method: None    Quality: ISO 8 (AGMA 9)   
Part Number: G006B-015-M04-050-030-A-P (10 Pcs)
Spur Gears - 15 tooth - 6x3 mm Hubbed - Acetal - No Insert Gear
1 pack (10 pcs) Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$9.00 AUD
$17.10 AUD $9.00 AUD
Per 10
Quantity Required

1 pack (10 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Number of Teeth
55

Pitch Circle Diameter (PD)
22.00
mm

(Equiv. 0.866 in.)
Bore (d)
4.000
mm

(Equiv. 0.157 in.)
Outside Diameter (OD)
22.800
mm
Face Width (FW)
5.000
mm
Type
Hubbed
Spur Gears - 55 tooth - 22x4 mm Hubbed - Acetal - No Insert Gear
Material: Acetal - No Insert    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: None    Quality: ISO 8 (AGMA 9)   
Part Number: G022B-055-M04-050-040-A-P (2 Pcs)
Spur Gears - 55 tooth - 22x4 mm Hubbed - Acetal - No Insert Gear
1 pack (2 pcs) Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 2
Quantity Required

1 pack (2 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Number of Teeth
55

Pitch Circle Diameter (PD)
22.00
mm

(Equiv. 0.866 in.)
Bore (d)
4.000
mm

(Equiv. 0.157 in.)
Outside Diameter (OD)
22.800
mm
Spur Gears - 55 tooth - 22x4 mm Hubbed - Acetal - No Insert Gear
Material: Acetal - No Insert    Face Width (FW): 5.000 mm    Type: Hubbed    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: None    Quality: ISO 8 (AGMA 9)   
Part Number: G022B-055-M04-050-040-A-P (2 Pcs)
Spur Gears - 55 tooth - 22x4 mm Hubbed - Acetal - No Insert Gear
1 pack (2 pcs) Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 2
Quantity Required

1 pack (2 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Number of Teeth
60

Pitch Circle Diameter (PD)
24.00
mm

(Equiv. 0.945 in.)
Bore (d)
6.000
mm

(Equiv. 0.236 in.)
Outside Diameter (OD)
24.800
mm
Face Width (FW)
5.000
mm
Type
Hubbed
Spur Gears - 60 tooth - 24x6 mm Hubbed - Acetal - No Insert Gear
Material: Acetal - No Insert    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: None    Quality: ISO 8 (AGMA 9)   
Part Number: G024B-060-M04-050-060-A-P
Spur Gears - 60 tooth - 24x6 mm Hubbed - Acetal - No Insert Gear
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Each
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Number of Teeth
60

Pitch Circle Diameter (PD)
24.00
mm

(Equiv. 0.945 in.)
Bore (d)
6.000
mm

(Equiv. 0.236 in.)
Outside Diameter (OD)
24.800
mm
Spur Gears - 60 tooth - 24x6 mm Hubbed - Acetal - No Insert Gear
Material: Acetal - No Insert    Face Width (FW): 5.000 mm    Type: Hubbed    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: None    Quality: ISO 8 (AGMA 9)   
Part Number: G024B-060-M04-050-060-A-P
Spur Gears - 60 tooth - 24x6 mm Hubbed - Acetal - No Insert Gear
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Each
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Number of Teeth
108

Pitch Circle Diameter (PD)
43.20
mm

(Equiv. 1.701 in.)
Bore (d)
6.000
mm

(Equiv. 0.236 in.)
Outside Diameter (OD)
44.000
mm
Face Width (FW)
5.000
mm
Type
Hubbed
Spur Gears - 108 tooth - 43.2x6 mm Hubbed - Acetal - No Insert Gear
Material: Acetal - No Insert    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: None    Quality: ISO 8 (AGMA 9)   
Part Number: G043B-108-M04-050-060-A-P (2 Pcs)
Spur Gears - 108 tooth - 43.2x6 mm Hubbed - Acetal - No Insert Gear
1 pack (2 pcs) Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$20.00 AUD
$38.00 AUD $20.00 AUD
Per 2
Quantity Required

1 pack (2 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Number of Teeth
108

Pitch Circle Diameter (PD)
43.20
mm

(Equiv. 1.701 in.)
Bore (d)
6.000
mm

(Equiv. 0.236 in.)
Outside Diameter (OD)
44.000
mm
Spur Gears - 108 tooth - 43.2x6 mm Hubbed - Acetal - No Insert Gear
Material: Acetal - No Insert    Face Width (FW): 5.000 mm    Type: Hubbed    Hub Diameter (D1): 15.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: None    Quality: ISO 8 (AGMA 9)   
Part Number: G043B-108-M04-050-060-A-P (2 Pcs)
Spur Gears - 108 tooth - 43.2x6 mm Hubbed - Acetal - No Insert Gear
1 pack (2 pcs) Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$20.00 AUD
$38.00 AUD $20.00 AUD
Per 2
Quantity Required

1 pack (2 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.