Washers - Self Aligning - Sets - Stainless Steel

Washers -> Self Aligning -> Sets -> Stainless Steel

There are 8 products in the sub-categories of Washers - Self Aligning - Sets - Stainless Steel. Browse the Washers - Self Aligning - Sets - Stainless Steel products table.

Category Details

A selection of Stainless Steel Sets Self Aligning Washers. Complete set, containing both aligning and seating washers.

  • Self-aligning washers are designed to compensate for misalignment between connected parts. An expanded range may be available on special order. Please enquire.
  • Consists of a convex and concave washer that swivel slightly when nested, allowing them to adapt to slight angles and uneven surfaces. This helps to distribute load evenly and reduce stress on the connection.
  • AISI 303 Stainless Steel
  • Max Shaft Size Shown will allow 3 Deg of misalignment.
  • DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Washers - Self Aligning - Sets - Stainless Steel category on the Small Parts & Bearings online store.
Suitable Shaft or Bolt Size Bore Size (A) OD (B) Overall Height (C) Indicative
Image
Self Aligning Washers - 6.35x7.137x15.88 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
6.35
mm
Bore Size (A)
7.137
mm
+/- 0.38
(Equiv. 0.281 in.)
OD (B)
15.88
mm
+ /- 0.38
(Equiv. 0.625 in.)
Overall Height (C)
4.750
mm
+/- 0.38
Self Aligning Washers - 6.35x7.137x15.88 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 6.35 mm   
Part Number: W0064-ALN-SS-SET (Each)
2 Available Now | Further orders can be expected around Fri, Aug 07, 2026
$9.14 AUD
$10.96 AUD $9.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Suitable Shaft or Bolt Size Bore Size (A) OD (B) Overall Height (C) Indicative
Image
Self Aligning Washers - 6.35x7.137x15.88 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
6.35
mm
Bore Size (A)
7.137
mm
+/- 0.38
(Equiv. 0.281 in.)
OD (B)
15.88
mm
+ /- 0.38
(Equiv. 0.625 in.)
Overall Height (C)
4.750
mm
+/- 0.38
Self Aligning Washers - 6.35x7.137x15.88 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 6.35 mm   
Part Number: W0064-ALN-SS-SET (Each)
2 Available Now | Further orders can be expected around Fri, Aug 07, 2026
$9.14 AUD
$10.96 AUD $9.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Self Aligning Washers - 7.94x8.712x19.05 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
7.94
mm
Bore Size (A)
8.712
mm
+/- 0.38
(Equiv. 0.343 in.)
OD (B)
19.05
mm
+ /- 0.38
(Equiv. 0.75 in.)
Overall Height (C)
6.350
mm
+/- 0.38
Self Aligning Washers - 7.94x8.712x19.05 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 7.938 mm   
Part Number: W0079-ALN-SS-SET (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Fri, Aug 07, 2026
$12.50 AUD
$15.00 AUD $12.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Self Aligning Washers - 7.94x8.712x19.05 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
7.94
mm
Bore Size (A)
8.712
mm
+/- 0.38
(Equiv. 0.343 in.)
OD (B)
19.05
mm
+ /- 0.38
(Equiv. 0.75 in.)
Overall Height (C)
6.350
mm
+/- 0.38
Self Aligning Washers - 7.94x8.712x19.05 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 7.938 mm   
Part Number: W0079-ALN-SS-SET (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Fri, Aug 07, 2026
$12.50 AUD
$15.00 AUD $12.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Self Aligning Washers - 9.53x10.319x22.23 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
9.53
mm
Bore Size (A)
10.319
mm
+/- 0.38
(Equiv. 0.406 in.)
OD (B)
22.23
mm
+ /- 0.38
(Equiv. 0.875 in.)
Overall Height (C)
6.350
mm
+/- 0.38
Self Aligning Washers - 9.53x10.319x22.23 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 9.525 mm   
Part Number: W0095-ALN-SS-SET (Each)
2 Available Now | Further orders can be expected around Fri, Aug 07, 2026
$14.50 AUD
$17.40 AUD $14.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Self Aligning Washers - 9.53x10.319x22.23 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
9.53
mm
Bore Size (A)
10.319
mm
+/- 0.38
(Equiv. 0.406 in.)
OD (B)
22.23
mm
+ /- 0.38
(Equiv. 0.875 in.)
Overall Height (C)
6.350
mm
+/- 0.38
Self Aligning Washers - 9.53x10.319x22.23 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 9.525 mm   
Part Number: W0095-ALN-SS-SET (Each)
2 Available Now | Further orders can be expected around Fri, Aug 07, 2026
$14.50 AUD
$17.40 AUD $14.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Self Aligning Washers - 12.7x13.494x28.58 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
12.70
mm
Bore Size (A)
13.494
mm
+/- 0.38
(Equiv. 0.531 in.)
OD (B)
28.58
mm
+ /- 0.38
(Equiv. 1.125 in.)
Overall Height (C)
7.925
mm
+/- 0.38
Self Aligning Washers - 12.7x13.494x28.58 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 12.7 mm   
Part Number: W0127-ALN-SS-SET (Each)
6 Available Now | Further orders can be expected around Fri, Aug 07, 2026
$23.86 AUD
$23.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 6 available can be backordered.
Self Aligning Washers - 12.7x13.494x28.58 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
12.70
mm
Bore Size (A)
13.494
mm
+/- 0.38
(Equiv. 0.531 in.)
OD (B)
28.58
mm
+ /- 0.38
(Equiv. 1.125 in.)
Overall Height (C)
7.925
mm
+/- 0.38
Self Aligning Washers - 12.7x13.494x28.58 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 12.7 mm   
Part Number: W0127-ALN-SS-SET (Each)
6 Available Now | Further orders can be expected around Fri, Aug 07, 2026
$23.86 AUD
$23.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

6 Available Now. Backorder if more than 6.
Self Aligning Washers - 15.88x16.662x34.93 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
15.88
mm
Bore Size (A)
16.662
mm
+/- 0.38
(Equiv. 0.656 in.)
OD (B)
34.93
mm
+ /- 0.38
(Equiv. 1.375 in.)
Overall Height (C)
7.925
mm
+/- 0.38
Self Aligning Washers - 15.88x16.662x34.93 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 15.875 mm   
Part Number: W0159-ALN-SS-SET (Each)
2 Available Now | Further orders can be expected around Fri, Aug 07, 2026
$25.23 AUD
$25.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Self Aligning Washers - 15.88x16.662x34.93 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
15.88
mm
Bore Size (A)
16.662
mm
+/- 0.38
(Equiv. 0.656 in.)
OD (B)
34.93
mm
+ /- 0.38
(Equiv. 1.375 in.)
Overall Height (C)
7.925
mm
+/- 0.38
Self Aligning Washers - 15.88x16.662x34.93 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 15.875 mm   
Part Number: W0159-ALN-SS-SET (Each)
2 Available Now | Further orders can be expected around Fri, Aug 07, 2026
$25.23 AUD
$25.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Self Aligning Washers - 19.05x19.844x41.28 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
19.05
mm
Bore Size (A)
19.844
mm
+/- 0.38
(Equiv. 0.781 in.)
OD (B)
41.28
mm
+ /- 0.38
(Equiv. 1.625 in.)
Overall Height (C)
9.525
mm
+/- 0.38
Self Aligning Washers - 19.05x19.844x41.28 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 19.05 mm   
Part Number: W0191-ALN-SS-SET (Each)
2 Available Now | Further orders can be expected around Fri, Aug 07, 2026
$26.41 AUD
$31.69 AUD $26.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Self Aligning Washers - 19.05x19.844x41.28 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
19.05
mm
Bore Size (A)
19.844
mm
+/- 0.38
(Equiv. 0.781 in.)
OD (B)
41.28
mm
+ /- 0.38
(Equiv. 1.625 in.)
Overall Height (C)
9.525
mm
+/- 0.38
Self Aligning Washers - 19.05x19.844x41.28 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 19.05 mm   
Part Number: W0191-ALN-SS-SET (Each)
2 Available Now | Further orders can be expected around Fri, Aug 07, 2026
$26.41 AUD
$31.69 AUD $26.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Self Aligning Washers - 22.23x23.813x44.45 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
22.23
mm
Bore Size (A)
23.813
mm
+/- 0.38
(Equiv. 0.938 in.)
OD (B)
44.45
mm
+ /- 0.38
(Equiv. 1.75 in.)
Overall Height (C)
9.525
mm
+/- 0.38
Self Aligning Washers - 22.23x23.813x44.45 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 22.225 mm   
Part Number: W0222-ALN-SS-SET (Each)
2 Available Now | Further orders can be expected around Fri, Aug 07, 2026
$32.23 AUD
$38.67 AUD $32.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Self Aligning Washers - 22.23x23.813x44.45 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
22.23
mm
Bore Size (A)
23.813
mm
+/- 0.38
(Equiv. 0.938 in.)
OD (B)
44.45
mm
+ /- 0.38
(Equiv. 1.75 in.)
Overall Height (C)
9.525
mm
+/- 0.38
Self Aligning Washers - 22.23x23.813x44.45 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 22.225 mm   
Part Number: W0222-ALN-SS-SET (Each)
2 Available Now | Further orders can be expected around Fri, Aug 07, 2026
$32.23 AUD
$38.67 AUD $32.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Self Aligning Washers - 25.4x26.975x50.8 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
25.40
mm
Bore Size (A)
26.975
mm
+/- 0.38
(Equiv. 1.062 in.)
OD (B)
50.80
mm
+ /- 0.38
(Equiv. 2 in.)
Overall Height (C)
12.700
mm
+/- 0.38
Self Aligning Washers - 25.4x26.975x50.8 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 25.4 mm   
Part Number: W0254-ALN-SS-SET (Each)
2 Available Now | Further orders can be expected around Fri, Aug 07, 2026
$37.95 AUD
$45.55 AUD $37.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Self Aligning Washers - 25.4x26.975x50.8 mm Sets - Stainless Steel Washer
Suitable Shaft or Bolt Size
25.40
mm
Bore Size (A)
26.975
mm
+/- 0.38
(Equiv. 1.062 in.)
OD (B)
50.80
mm
+ /- 0.38
(Equiv. 2 in.)
Overall Height (C)
12.700
mm
+/- 0.38
Self Aligning Washers - 25.4x26.975x50.8 mm - Stainless Steel
Material: Stainless Steel    Actual ID (Ref): 25.4 mm   
Part Number: W0254-ALN-SS-SET (Each)
2 Available Now | Further orders can be expected around Fri, Aug 07, 2026
$37.95 AUD
$45.55 AUD $37.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.