Plungers - Spring - Ring Handle - Non Locking - Stainless

Plungers -> Spring -> Ring Handle -> Non Locking -> Stainless

There are 5 products in the sub-categories of Plungers - Spring - Ring Handle - Non Locking - Stainless. Browse the Plungers - Spring - Ring Handle - Non Locking - Stainless products table.

Category Details

A selection of Stainless Non Locking Ring Handle Spring Plungers. Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

  • A compact mechanical component with a spring-loaded ball or pin inside a housing that applies consistent, predictable force. Internal spring compresses when pressure is applied to the ball or pin, allowing it to settle into designated positions or recess.
  • Provides a reliable holding or locating mechanism in various industrial applications where precise alignment or securing of parts is needed.
  • Also known as ball plungers or spring-loaded pins.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Plungers - Spring - Ring Handle - Non Locking - Stainless category on the Small Parts & Bearings online store.
Thread Size (A) Thread Length (B) Initial Pressure (F1) Final Pressure (F2) Tip Diameter (D) Tip Length (C) Indicative
Image
Thread Size (A)
1/4-20 UNC (6.35mm)

Thread Length (B)
7.9
mm

(Equiv. 0.311 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
8.9
N
Tip Diameter (D)
4.1
mm
Tip Length (C)
4.8
mm
Spring Plungers - 1/4-20 UNC - 6.35mm - 7.9 mm - 2.2 N Ring Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 11.2 mm    Across Flats (E): 6.4 mm    G: 3.3 mm    Thread Length (H): 7.9 mm    Ring Diameter (J): 19.1   
Part Number: PLST-064C-112-RS-009A
Spring Plungers - 1/4-20 UNC - 6.35mm - 7.9 mm - 2.2 N Ring Handle - Stainless Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$35.86 AUD
$43.04 AUD $35.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A) Thread Length (B) Initial Pressure (F1) Final Pressure (F2) Indicative
Image
Thread Size (A)
1/4-20 UNC (6.35mm)

Thread Length (B)
7.9
mm

(Equiv. 0.311 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
8.9
N
Spring Plungers - 1/4-20 UNC - 6.35mm - 7.9 mm - 2.2 N Ring Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 4.1 mm    Tip Length (C): 4.8 mm    Body Length (B): 11.2 mm    Across Flats (E): 6.4 mm    G: 3.3 mm    Thread Length (H): 7.9 mm    Ring Diameter (J): 19.1   
Part Number: PLST-064C-112-RS-009A
Spring Plungers - 1/4-20 UNC - 6.35mm - 7.9 mm - 2.2 N Ring Handle - Stainless Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$35.86 AUD
$43.04 AUD $35.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/4-20 UNC (6.35mm)

Thread Length (B)
7.9
mm

(Equiv. 0.311 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
8.9
N
Tip Diameter (D)
4.1
mm
Tip Length (C)
4.8
mm
Spring Plungers - 1/4-20 UNC - 6.35mm - 7.9 mm - 2.2 N Ring Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 11.2 mm    Across Flats (E): 6.4 mm    G: 3.3 mm    Thread Length (H): 7.9 mm    Ring Diameter (J): 15.8   
Part Number: PLST-064C-112-RS-009
Spring Plungers - 1/4-20 UNC - 6.35mm - 7.9 mm - 2.2 N Ring Handle - Stainless Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$33.77 AUD
$40.53 AUD $33.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/4-20 UNC (6.35mm)

Thread Length (B)
7.9
mm

(Equiv. 0.311 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
8.9
N
Spring Plungers - 1/4-20 UNC - 6.35mm - 7.9 mm - 2.2 N Ring Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 4.1 mm    Tip Length (C): 4.8 mm    Body Length (B): 11.2 mm    Across Flats (E): 6.4 mm    G: 3.3 mm    Thread Length (H): 7.9 mm    Ring Diameter (J): 15.8   
Part Number: PLST-064C-112-RS-009
Spring Plungers - 1/4-20 UNC - 6.35mm - 7.9 mm - 2.2 N Ring Handle - Stainless Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$33.77 AUD
$40.53 AUD $33.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/8-16 UNC (9.53mm)

Thread Length (B)
7.9
mm

(Equiv. 0.311 in.)
Initial Pressure (F1)
3.3
N
Final Pressure (F2)
13.4
N
Tip Diameter (D)
6.4
mm
Tip Length (C)
7.1
mm
Spring Plungers - 3/8-16 UNC - 9.53mm - 7.9 mm - 3.3 N Ring Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 16.0 mm    Across Flats (E): 9.7 mm    F: 3.3 mm    G: 4.8 mm    Thread Length (H): 11.2 mm    Ring Diameter (J): 19.1   
Part Number: PLST-095C-160-RS-013
Spring Plungers - 3/8-16 UNC - 9.53mm - 7.9 mm - 3.3 N Ring Handle - Stainless Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$38.23 AUD
$45.87 AUD $38.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/8-16 UNC (9.53mm)

Thread Length (B)
7.9
mm

(Equiv. 0.311 in.)
Initial Pressure (F1)
3.3
N
Final Pressure (F2)
13.4
N
Spring Plungers - 3/8-16 UNC - 9.53mm - 7.9 mm - 3.3 N Ring Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 6.4 mm    Tip Length (C): 7.1 mm    Body Length (B): 16.0 mm    Across Flats (E): 9.7 mm    F: 3.3 mm    G: 4.8 mm    Thread Length (H): 11.2 mm    Ring Diameter (J): 19.1   
Part Number: PLST-095C-160-RS-013
Spring Plungers - 3/8-16 UNC - 9.53mm - 7.9 mm - 3.3 N Ring Handle - Stainless Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$38.23 AUD
$45.87 AUD $38.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/2-13 UNC (12.7mm)

Thread Length (B)
10.9
mm

(Equiv. 0.429 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
17.8
N
Tip Diameter (D)
7.9
mm
Tip Length (C)
9.7
mm
Spring Plungers - 1/2-13 UNC - 12.7mm - 10.9 mm - 4.5 N Ring Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 20.6 mm    Across Flats (E): 12.7 mm    F: 3.3 mm    G: 6.4 mm    Thread Length (H): 14.2 mm    Ring Diameter (J): 25.4   
Part Number: PLST-127C-206-RS-018
Spring Plungers - 1/2-13 UNC - 12.7mm - 10.9 mm - 4.5 N Ring Handle - Stainless Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$47.23 AUD
$56.67 AUD $47.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/2-13 UNC (12.7mm)

Thread Length (B)
10.9
mm

(Equiv. 0.429 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
17.8
N
Spring Plungers - 1/2-13 UNC - 12.7mm - 10.9 mm - 4.5 N Ring Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 7.9 mm    Tip Length (C): 9.7 mm    Body Length (B): 20.6 mm    Across Flats (E): 12.7 mm    F: 3.3 mm    G: 6.4 mm    Thread Length (H): 14.2 mm    Ring Diameter (J): 25.4   
Part Number: PLST-127C-206-RS-018
Spring Plungers - 1/2-13 UNC - 12.7mm - 10.9 mm - 4.5 N Ring Handle - Stainless Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$47.23 AUD
$56.67 AUD $47.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
5/8-11 UNC (15.88mm)

Thread Length (B)
14.2
mm

(Equiv. 0.559 in.)
Initial Pressure (F1)
5.6
N
Final Pressure (F2)
22.2
N
Tip Diameter (D)
9.7
mm
Tip Length (C)
11.2
mm
Spring Plungers - 5/8-11 UNC - 15.88mm - 14.2 mm - 5.6 N Ring Handle - Stainless Steel
Material: Stainless Steel    Body Length (B): 25.4 mm    Across Flats (E): 15.8 mm    F: 3.3 mm    G: 7.9 mm    Thread Length (H): 17.5 mm    Ring Diameter (J): 25.4   
Part Number: PLST-159C-254-RS-022
Spring Plungers - 5/8-11 UNC - 15.88mm - 14.2 mm - 5.6 N Ring Handle - Stainless Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$68.05 AUD
$81.65 AUD $68.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
5/8-11 UNC (15.88mm)

Thread Length (B)
14.2
mm

(Equiv. 0.559 in.)
Initial Pressure (F1)
5.6
N
Final Pressure (F2)
22.2
N
Spring Plungers - 5/8-11 UNC - 15.88mm - 14.2 mm - 5.6 N Ring Handle - Stainless Steel
Material: Stainless Steel    Tip Diameter (D): 9.7 mm    Tip Length (C): 11.2 mm    Body Length (B): 25.4 mm    Across Flats (E): 15.8 mm    F: 3.3 mm    G: 7.9 mm    Thread Length (H): 17.5 mm    Ring Diameter (J): 25.4   
Part Number: PLST-159C-254-RS-022
Spring Plungers - 5/8-11 UNC - 15.88mm - 14.2 mm - 5.6 N Ring Handle - Stainless Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$68.05 AUD
$81.65 AUD $68.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.