Plungers - Spring - Knurled Handle - Non Locking - Steel

Plungers -> Spring -> Knurled Handle -> Non Locking -> Steel

There are 18 products in the sub-categories of Plungers - Spring - Knurled Handle - Non Locking - Steel. Browse the Plungers - Spring - Knurled Handle - Non Locking - Steel products table.

Category Details

A selection of Steel Non Locking Knurled Handle Spring Plungers. Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

  • A compact mechanical component with a spring-loaded ball or pin inside a housing that applies consistent, predictable force. Internal spring compresses when pressure is applied to the ball or pin, allowing it to settle into designated positions or recess.
  • Provides a reliable holding or locating mechanism in various industrial applications where precise alignment or securing of parts is needed.
  • Also known as ball plungers or spring-loaded pins.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Plungers - Spring - Knurled Handle - Non Locking - Steel category on the Small Parts & Bearings online store.
Thread Size (A) Thread Length (B) Initial Pressure (F1) Final Pressure (F2) Tip Diameter (D) Tip Length (C) Indicative
Image
Thread Size (A)
10-32 UNF (4.76mm)

Thread Length (B)
10.2
mm

(Equiv. 0.402 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
13.4
N
Tip Diameter (D)
2.6
mm
Tip Length (C)
2.4
mm
Spring Plungers - 10-32 UNF - 4.76mm - 10.2 mm - 2.2 N Knurled Handle - Steel
Material: Steel    Head Length (F): 6.4    Additional: With Locking Element   
Part Number: PLST-048F-102-HKCLK-013
Spring Plungers - 10-32 UNF - 4.76mm - 10.2 mm - 2.2 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$43.95 AUD
$52.75 AUD $43.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A) Thread Length (B) Initial Pressure (F1) Final Pressure (F2) Indicative
Image
Thread Size (A)
10-32 UNF (4.76mm)

Thread Length (B)
10.2
mm

(Equiv. 0.402 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
13.4
N
Spring Plungers - 10-32 UNF - 4.76mm - 10.2 mm - 2.2 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 2.6 mm    Tip Length (C): 2.4 mm    Head Length (F): 6.4    Additional: With Locking Element   
Part Number: PLST-048F-102-HKCLK-013
Spring Plungers - 10-32 UNF - 4.76mm - 10.2 mm - 2.2 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$43.95 AUD
$52.75 AUD $43.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
10-32 UNF (4.76mm)

Thread Length (B)
10.2
mm

(Equiv. 0.402 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
13.4
N
Tip Diameter (D)
2.6
mm
Tip Length (C)
2.4
mm
Spring Plungers - 10-32 UNF - 4.76mm - 10.2 mm - 2.2 N Knurled Handle - Steel
Material: Steel    Head Length (F): 6.4   
Part Number: PLST-048F-102-HKC-013
Spring Plungers - 10-32 UNF - 4.76mm - 10.2 mm - 2.2 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$30.23 AUD
$36.27 AUD $30.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
10-32 UNF (4.76mm)

Thread Length (B)
10.2
mm

(Equiv. 0.402 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
13.4
N
Spring Plungers - 10-32 UNF - 4.76mm - 10.2 mm - 2.2 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 2.6 mm    Tip Length (C): 2.4 mm    Head Length (F): 6.4   
Part Number: PLST-048F-102-HKC-013
Spring Plungers - 10-32 UNF - 4.76mm - 10.2 mm - 2.2 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$30.23 AUD
$36.27 AUD $30.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
M5 (5x0.8mm)

Thread Length (B)
10.0
mm

(Equiv. 0.394 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
13.3
N
Tip Diameter (D)
2.5
mm
Tip Length (C)
2.0
mm
Spring Plungers - M5 - 5x0.8mm - 10 mm - 2.2 N Knurled Handle - Steel
Material: Steel    Head Length (F): 6.0   
Part Number: PLST-050-100-HKC-013
Spring Plungers - M5 - 5x0.8mm - 10 mm - 2.2 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$44.59 AUD
$53.51 AUD $44.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
M5 (5x0.8mm)

Thread Length (B)
10.0
mm

(Equiv. 0.394 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
13.3
N
Spring Plungers - M5 - 5x0.8mm - 10 mm - 2.2 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 2.5 mm    Tip Length (C): 2.0 mm    Head Length (F): 6.0   
Part Number: PLST-050-100-HKC-013
Spring Plungers - M5 - 5x0.8mm - 10 mm - 2.2 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$44.59 AUD
$53.51 AUD $44.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
M5 (5x0.8mm)

Thread Length (B)
10.0
mm

(Equiv. 0.394 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
13.3
N
Tip Diameter (D)
2.5
mm
Tip Length (C)
2.0
mm
Spring Plungers - M5 - 5x0.8mm - 10 mm - 2.2 N Knurled Handle - Steel
Material: Steel    Head Length (F): 6.0    Additional: With Locking Element   
Part Number: PLST-050-100-HKCLK-013
Spring Plungers - M5 - 5x0.8mm - 10 mm - 2.2 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$71.41 AUD
$85.69 AUD $71.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
M5 (5x0.8mm)

Thread Length (B)
10.0
mm

(Equiv. 0.394 in.)
Initial Pressure (F1)
2.2
N
Final Pressure (F2)
13.3
N
Spring Plungers - M5 - 5x0.8mm - 10 mm - 2.2 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 2.5 mm    Tip Length (C): 2.0 mm    Head Length (F): 6.0    Additional: With Locking Element   
Part Number: PLST-050-100-HKCLK-013
Spring Plungers - M5 - 5x0.8mm - 10 mm - 2.2 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$71.41 AUD
$85.69 AUD $71.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
M6 (6x1mm)

Thread Length (B)
13.0
mm

(Equiv. 0.512 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
17.8
N
Tip Diameter (D)
3.0
mm
Tip Length (C)
3.0
mm
Spring Plungers - M6 - 6x1mm - 13 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Head Length (F): 8.0   
Part Number: PLST-060-130-HKC-018
Spring Plungers - M6 - 6x1mm - 13 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$44.50 AUD
$53.40 AUD $44.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
M6 (6x1mm)

Thread Length (B)
13.0
mm

(Equiv. 0.512 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
17.8
N
Spring Plungers - M6 - 6x1mm - 13 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 3.0 mm    Tip Length (C): 3.0 mm    Head Length (F): 8.0   
Part Number: PLST-060-130-HKC-018
Spring Plungers - M6 - 6x1mm - 13 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$44.50 AUD
$53.40 AUD $44.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
M6 (6x1mm)

Thread Length (B)
13.0
mm

(Equiv. 0.512 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
17.8
N
Tip Diameter (D)
3.0
mm
Tip Length (C)
3.0
mm
Spring Plungers - M6 - 6x1mm - 13 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Head Length (F): 8.0    Additional: With Locking Element   
Part Number: PLST-060-130-HKCLK-018
Spring Plungers - M6 - 6x1mm - 13 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$34.59 AUD
$41.51 AUD $34.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
M6 (6x1mm)

Thread Length (B)
13.0
mm

(Equiv. 0.512 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
17.8
N
Spring Plungers - M6 - 6x1mm - 13 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 3.0 mm    Tip Length (C): 3.0 mm    Head Length (F): 8.0    Additional: With Locking Element   
Part Number: PLST-060-130-HKCLK-018
Spring Plungers - M6 - 6x1mm - 13 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$34.59 AUD
$41.51 AUD $34.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/4-20 UNC (6.35mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
17.8
N
Tip Diameter (D)
3.2
mm
Tip Length (C)
3.2
mm
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Head Length (F): 7.9   
Part Number: PLST-064C-127-HKC-018
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$27.59 AUD
$33.11 AUD $27.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/4-20 UNC (6.35mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
17.8
N
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 3.2 mm    Tip Length (C): 3.2 mm    Head Length (F): 7.9   
Part Number: PLST-064C-127-HKC-018
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$27.59 AUD
$33.11 AUD $27.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/4-20 UNC (6.35mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
17.8
N
Tip Diameter (D)
3.2
mm
Tip Length (C)
3.2
mm
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Head Length (F): 7.9    Additional: With Locking Element   
Part Number: PLST-064C-127-HKCLK-018
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$27.05 AUD
$32.45 AUD $27.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/4-20 UNC (6.35mm)

Thread Length (B)
12.7
mm

(Equiv. 0.5 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
17.8
N
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 3.2 mm    Tip Length (C): 3.2 mm    Head Length (F): 7.9    Additional: With Locking Element   
Part Number: PLST-064C-127-HKCLK-018
Spring Plungers - 1/4-20 UNC - 6.35mm - 12.7 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$27.05 AUD
$32.45 AUD $27.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
5/16-18 UNC (7.94mm)

Thread Length (B)
15.9
mm

(Equiv. 0.626 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
26.7
N
Tip Diameter (D)
3.9
mm
Tip Length (C)
4.8
mm
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Head Length (F): 9.5    Additional: With Locking Element   
Part Number: PLST-079C-159-HKCLK-027
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$35.95 AUD
$43.15 AUD $35.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
5/16-18 UNC (7.94mm)

Thread Length (B)
15.9
mm

(Equiv. 0.626 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
26.7
N
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 3.9 mm    Tip Length (C): 4.8 mm    Head Length (F): 9.5    Additional: With Locking Element   
Part Number: PLST-079C-159-HKCLK-027
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$35.95 AUD
$43.15 AUD $35.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
5/16-18 UNC (7.94mm)

Thread Length (B)
15.9
mm

(Equiv. 0.626 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
26.7
N
Tip Diameter (D)
3.9
mm
Tip Length (C)
4.8
mm
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Head Length (F): 9.5   
Part Number: PLST-079C-159-HKC-027
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$29.50 AUD
$35.40 AUD $29.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
5/16-18 UNC (7.94mm)

Thread Length (B)
15.9
mm

(Equiv. 0.626 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
26.7
N
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 3.9 mm    Tip Length (C): 4.8 mm    Head Length (F): 9.5   
Part Number: PLST-079C-159-HKC-027
Spring Plungers - 5/16-18 UNC - 7.94mm - 15.9 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$29.50 AUD
$35.40 AUD $29.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/8-16 UNC (9.53mm)

Thread Length (B)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
35.6
N
Tip Diameter (D)
4.7
mm
Tip Length (C)
5.6
mm
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Head Length (F): 12.7    Additional: With Locking Element   
Part Number: PLST-095C-191-HKCLK-036
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$37.77 AUD
$45.33 AUD $37.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/8-16 UNC (9.53mm)

Thread Length (B)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
35.6
N
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 4.7 mm    Tip Length (C): 5.6 mm    Head Length (F): 12.7    Additional: With Locking Element   
Part Number: PLST-095C-191-HKCLK-036
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$37.77 AUD
$45.33 AUD $37.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/8-16 UNC (9.53mm)

Thread Length (B)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
35.6
N
Tip Diameter (D)
4.7
mm
Tip Length (C)
5.6
mm
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Head Length (F): 12.7   
Part Number: PLST-095C-191-HKC-036
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$30.41 AUD
$36.49 AUD $30.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/8-16 UNC (9.53mm)

Thread Length (B)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
35.6
N
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 4.7 mm    Tip Length (C): 5.6 mm    Head Length (F): 12.7   
Part Number: PLST-095C-191-HKC-036
Spring Plungers - 3/8-16 UNC - 9.53mm - 19.1 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$30.41 AUD
$36.49 AUD $30.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
M10 (10x1.5mm)

Thread Length (B)
19.0
mm

(Equiv. 0.748 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
35.6
N
Tip Diameter (D)
5.0
mm
Tip Length (C)
6.0
mm
Spring Plungers - M10 - 10x1.5mm - 19 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Head Length (F): 13.0    Additional: With Locking Element   
Part Number: PLST-100-190-HKCLK-036
Spring Plungers - M10 - 10x1.5mm - 19 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$60.32 AUD
$72.38 AUD $60.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
M10 (10x1.5mm)

Thread Length (B)
19.0
mm

(Equiv. 0.748 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
35.6
N
Spring Plungers - M10 - 10x1.5mm - 19 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 5.0 mm    Tip Length (C): 6.0 mm    Head Length (F): 13.0    Additional: With Locking Element   
Part Number: PLST-100-190-HKCLK-036
Spring Plungers - M10 - 10x1.5mm - 19 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$60.32 AUD
$72.38 AUD $60.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
M10 (10x1.5mm)

Thread Length (B)
19.0
mm

(Equiv. 0.748 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
35.6
N
Tip Diameter (D)
5.0
mm
Tip Length (C)
6.0
mm
Spring Plungers - M10 - 10x1.5mm - 19 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Head Length (F): 13.0   
Part Number: PLST-100-190-HKC-036
Spring Plungers - M10 - 10x1.5mm - 19 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$48.23 AUD
$57.87 AUD $48.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
M10 (10x1.5mm)

Thread Length (B)
19.0
mm

(Equiv. 0.748 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
35.6
N
Spring Plungers - M10 - 10x1.5mm - 19 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 5.0 mm    Tip Length (C): 6.0 mm    Head Length (F): 13.0   
Part Number: PLST-100-190-HKC-036
Spring Plungers - M10 - 10x1.5mm - 19 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$48.23 AUD
$57.87 AUD $48.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
M12 (12x1.75mm)

Thread Length (B)
23.0
mm

(Equiv. 0.906 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
44.5
N
Tip Diameter (D)
6.0
mm
Tip Length (C)
6.0
mm
Spring Plungers - M12 - 12x1.75mm - 23 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Head Length (F): 16.0    Additional: With Locking Element   
Part Number: PLST-120-230-HKCLK-045
Spring Plungers - M12 - 12x1.75mm - 23 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$55.14 AUD
$66.16 AUD $55.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
M12 (12x1.75mm)

Thread Length (B)
23.0
mm

(Equiv. 0.906 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
44.5
N
Spring Plungers - M12 - 12x1.75mm - 23 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 6.0 mm    Tip Length (C): 6.0 mm    Head Length (F): 16.0    Additional: With Locking Element   
Part Number: PLST-120-230-HKCLK-045
Spring Plungers - M12 - 12x1.75mm - 23 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$55.14 AUD
$66.16 AUD $55.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
M12 (12x1.75mm)

Thread Length (B)
23.0
mm

(Equiv. 0.906 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
44.5
N
Tip Diameter (D)
6.0
mm
Tip Length (C)
6.0
mm
Spring Plungers - M12 - 12x1.75mm - 23 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Head Length (F): 16.0   
Part Number: PLST-120-230-HKC-045
Spring Plungers - M12 - 12x1.75mm - 23 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$51.50 AUD
$61.80 AUD $51.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
M12 (12x1.75mm)

Thread Length (B)
23.0
mm

(Equiv. 0.906 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
44.5
N
Spring Plungers - M12 - 12x1.75mm - 23 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 6.0 mm    Tip Length (C): 6.0 mm    Head Length (F): 16.0   
Part Number: PLST-120-230-HKC-045
Spring Plungers - M12 - 12x1.75mm - 23 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$51.50 AUD
$61.80 AUD $51.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/2-13 UNC (12.7mm)

Thread Length (B)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
44.5
N
Tip Diameter (D)
6.3
mm
Tip Length (C)
6.4
mm
Spring Plungers - 1/2-13 UNC - 12.7mm - 19.1 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Head Length (F): 15.9   
Part Number: PLST-127C-191-HKC-044
Spring Plungers - 1/2-13 UNC - 12.7mm - 19.1 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$37.86 AUD
$45.44 AUD $37.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/2-13 UNC (12.7mm)

Thread Length (B)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
44.5
N
Spring Plungers - 1/2-13 UNC - 12.7mm - 19.1 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 6.3 mm    Tip Length (C): 6.4 mm    Head Length (F): 15.9   
Part Number: PLST-127C-191-HKC-044
Spring Plungers - 1/2-13 UNC - 12.7mm - 19.1 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$37.86 AUD
$45.44 AUD $37.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/2-13 UNC (12.7mm)

Thread Length (B)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
44.5
N
Tip Diameter (D)
6.3
mm
Tip Length (C)
6.4
mm
Spring Plungers - 1/2-13 UNC - 12.7mm - 19.1 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Head Length (F): 15.9    Additional: With Locking Element   
Part Number: PLST-127C-191-HKCLK-044
Spring Plungers - 1/2-13 UNC - 12.7mm - 19.1 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$37.86 AUD
$45.44 AUD $37.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/2-13 UNC (12.7mm)

Thread Length (B)
19.1
mm

(Equiv. 0.752 in.)
Initial Pressure (F1)
4.5
N
Final Pressure (F2)
44.5
N
Spring Plungers - 1/2-13 UNC - 12.7mm - 19.1 mm - 4.5 N Knurled Handle - Steel
Material: Steel    Tip Diameter (D): 6.3 mm    Tip Length (C): 6.4 mm    Head Length (F): 15.9    Additional: With Locking Element   
Part Number: PLST-127C-191-HKCLK-044
Spring Plungers - 1/2-13 UNC - 12.7mm - 19.1 mm - 4.5 N Knurled Handle - Steel Plunger
Out of Stock | Backorder Now | Orders can be expected around Fri, Nov 14, 2025
$37.86 AUD
$45.44 AUD $37.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.