Plungers - Indexing - Grip - Stainless - Without Nut

48 Products in this selection
  • Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.
Additional resources:
A more concise listing may be found on the Smallparts store at Plungers - Indexing - Grip - Stainless - Without Nut. Smallparts promote the most popular MBA products.
Thread (B) Thread Length (F) Initial End Force Final End Force Tip Diameter (A) Tip Length (E) Indicative
Image
Thread (B)
5/8-11 UNC (15.88mm)
Thread Length (F)
32.0
mm
Initial End Force
0.6
N
Final End Force
1.5
N
Tip Diameter (A)
6.0
mm
Tip Length (E)
10.0
mm
1110490 | PLIT-060-158C-16-G-S3 --- Indexing Plungers - 5/8-11 UNC -15.88mm- 32 mm - 0.6 N - Stainless Steel
Material: Stainless Steel    H: 23.8    Handle Length (G): 40.0 mm   
Part Number: PLIT-060-158C-16-G-S3 Indexing Plungers - 5/8-11 UNC -15.88mm- 32 mm - 0.6 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.41 AUD
$115.41 AUD
Each
Thread (B) Thread Length (F) Initial End Force Final End Force Indicative
Image
Thread (B)
5/8-11 UNC (15.88mm)
Thread Length (F)
32.0
mm
Initial End Force
0.6
N
Final End Force
1.5
N
1110490 | PLIT-060-158C-16-G-S3 --- Indexing Plungers - 5/8-11 UNC -15.88mm- 32 mm - 0.6 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 10.0 mm    H: 23.8    Handle Length (G): 40.0 mm   
Part Number: PLIT-060-158C-16-G-S3 Indexing Plungers - 5/8-11 UNC -15.88mm- 32 mm - 0.6 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.41 AUD
$115.41 AUD
Each
View the product page first if you are unsure.
Thread (B)
5/8-11 UNC (15.88mm)
Thread Length (F)
32.0
mm
Initial End Force
0.8
N
Final End Force
1.5
N
Tip Diameter (A)
8.0
mm
Tip Length (E)
10.0
mm
1110492 | PLIT-080-158C-16-G-S3 --- Indexing Plungers - 5/8-11 UNC -15.88mm- 32 mm - 0.8 N - Stainless Steel
Material: Stainless Steel    H: 23.8    Handle Length (G): 40.0 mm   
Part Number: PLIT-080-158C-16-G-S3 Indexing Plungers - 5/8-11 UNC -15.88mm- 32 mm - 0.8 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.50 AUD
$115.50 AUD
Each
Thread (B)
5/8-11 UNC (15.88mm)
Thread Length (F)
32.0
mm
Initial End Force
0.8
N
Final End Force
1.5
N
1110492 | PLIT-080-158C-16-G-S3 --- Indexing Plungers - 5/8-11 UNC -15.88mm- 32 mm - 0.8 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 8.0 mm    Tip Length (E): 10.0 mm    H: 23.8    Handle Length (G): 40.0 mm   
Part Number: PLIT-080-158C-16-G-S3 Indexing Plungers - 5/8-11 UNC -15.88mm- 32 mm - 0.8 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.50 AUD
$115.50 AUD
Each
View the product page first if you are unsure.
Thread (B)
5/8-18 UNF (15.88mm)
Thread Length (F)
25.0
mm
Initial End Force
0.8
N
Final End Force
0.8
N
Tip Diameter (A)
8.0
mm
Tip Length (E)
8.0
mm
1111250 | PLIT-080-158F-12-G-S3 --- Indexing Plungers - 5/8-18 UNF -15.88mm- 25 mm - 0.8 N - Stainless Steel
Material: Stainless Steel    H: 23.8    Handle Length (G): 30.0 mm   
Part Number: PLIT-080-158F-12-G-S3 Indexing Plungers - 5/8-18 UNF -15.88mm- 25 mm - 0.8 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.86 AUD
$115.86 AUD
Each
Thread (B)
5/8-18 UNF (15.88mm)
Thread Length (F)
25.0
mm
Initial End Force
0.8
N
Final End Force
0.8
N
1111250 | PLIT-080-158F-12-G-S3 --- Indexing Plungers - 5/8-18 UNF -15.88mm- 25 mm - 0.8 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 8.0 mm    Tip Length (E): 8.0 mm    H: 23.8    Handle Length (G): 30.0 mm   
Part Number: PLIT-080-158F-12-G-S3 Indexing Plungers - 5/8-18 UNF -15.88mm- 25 mm - 0.8 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.86 AUD
$115.86 AUD
Each
View the product page first if you are unsure.
Thread (B)
5/8-18 UNF (15.88mm)
Thread Length (F)
32.0
mm
Initial End Force
1.0
N
Final End Force
1.5
N
Tip Diameter (A)
10.0
mm
Tip Length (E)
10.0
mm
1111256 | PLIT-100-158F-16-G-S3 --- Indexing Plungers - 5/8-18 UNF -15.88mm- 32 mm - 1 N - Stainless Steel
Material: Stainless Steel    H: 23.8    Handle Length (G): 40.0 mm   
Part Number: PLIT-100-158F-16-G-S3 Indexing Plungers - 5/8-18 UNF -15.88mm- 32 mm - 1 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.95 AUD
$115.95 AUD
Each
Thread (B)
5/8-18 UNF (15.88mm)
Thread Length (F)
32.0
mm
Initial End Force
1.0
N
Final End Force
1.5
N
1111256 | PLIT-100-158F-16-G-S3 --- Indexing Plungers - 5/8-18 UNF -15.88mm- 32 mm - 1 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 10.0 mm    Tip Length (E): 10.0 mm    H: 23.8    Handle Length (G): 40.0 mm   
Part Number: PLIT-100-158F-16-G-S3 Indexing Plungers - 5/8-18 UNF -15.88mm- 32 mm - 1 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.95 AUD
$115.95 AUD
Each
View the product page first if you are unsure.
Thread (B)
5/8-11 UNC (15.88mm)
Thread Length (F)
32.0
mm
Initial End Force
1.0
N
Final End Force
1.5
N
Tip Diameter (A)
10.0
mm
Tip Length (E)
10.0
mm
1112286 | PLIT-100-158C-16-G-S3 --- Indexing Plungers - 5/8-11 UNC -15.88mm- 32 mm - 1 N - Stainless Steel
Material: Stainless Steel    H: 23.8    Handle Length (G): 40.0 mm   
Part Number: PLIT-100-158C-16-G-S3 Indexing Plungers - 5/8-11 UNC -15.88mm- 32 mm - 1 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.68 AUD
$115.68 AUD
Each
Thread (B)
5/8-11 UNC (15.88mm)
Thread Length (F)
32.0
mm
Initial End Force
1.0
N
Final End Force
1.5
N
1112286 | PLIT-100-158C-16-G-S3 --- Indexing Plungers - 5/8-11 UNC -15.88mm- 32 mm - 1 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 10.0 mm    Tip Length (E): 10.0 mm    H: 23.8    Handle Length (G): 40.0 mm   
Part Number: PLIT-100-158C-16-G-S3 Indexing Plungers - 5/8-11 UNC -15.88mm- 32 mm - 1 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.68 AUD
$115.68 AUD
Each
View the product page first if you are unsure.
Thread (B)
5/8-18 UNF (15.88mm)
Thread Length (F)
32.0
mm
Initial End Force
0.6
N
Final End Force
1.5
N
Tip Diameter (A)
6.0
mm
Tip Length (E)
10.0
mm
1113043 | PLIT-060-158F-16-G-S3 --- Indexing Plungers - 5/8-18 UNF -15.88mm- 32 mm - 0.6 N - Stainless Steel
Material: Stainless Steel    H: 23.8    Handle Length (G): 40.0 mm   
Part Number: PLIT-060-158F-16-G-S3 Indexing Plungers - 5/8-18 UNF -15.88mm- 32 mm - 0.6 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$83.86 AUD
$83.86 AUD
Each
Thread (B)
5/8-18 UNF (15.88mm)
Thread Length (F)
32.0
mm
Initial End Force
0.6
N
Final End Force
1.5
N
1113043 | PLIT-060-158F-16-G-S3 --- Indexing Plungers - 5/8-18 UNF -15.88mm- 32 mm - 0.6 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 10.0 mm    H: 23.8    Handle Length (G): 40.0 mm   
Part Number: PLIT-060-158F-16-G-S3 Indexing Plungers - 5/8-18 UNF -15.88mm- 32 mm - 0.6 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$83.86 AUD
$83.86 AUD
Each
View the product page first if you are unsure.
Thread (B)
M16 Extra Fine (16x1.5mm)
Thread Length (F)
32.0
mm
Initial End Force
0.6
N
Final End Force
1.5
N
Tip Diameter (A)
6.0
mm
Tip Length (E)
10.0
mm
1113519 | PLIT-060-160-150-16-G-S3 --- Indexing Plungers - M16 Extra Fine -16x1.5mm- 32 mm - 0.6 N - Stainless Steel
Material: Stainless Steel    H: 35.0    Handle Length (G): 40.0 mm   
Part Number: PLIT-060-160-150-16-G-S3 Indexing Plungers - M16 Extra Fine -16x1.5mm- 32 mm - 0.6 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.68 AUD
$115.68 AUD
Each
Thread (B)
M16 Extra Fine (16x1.5mm)
Thread Length (F)
32.0
mm
Initial End Force
0.6
N
Final End Force
1.5
N
1113519 | PLIT-060-160-150-16-G-S3 --- Indexing Plungers - M16 Extra Fine -16x1.5mm- 32 mm - 0.6 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 10.0 mm    H: 35.0    Handle Length (G): 40.0 mm   
Part Number: PLIT-060-160-150-16-G-S3 Indexing Plungers - M16 Extra Fine -16x1.5mm- 32 mm - 0.6 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.68 AUD
$115.68 AUD
Each
View the product page first if you are unsure.
Thread (B)
M16 (16x2mm)
Thread Length (F)
32.0
mm
Initial End Force
1.0
N
Final End Force
1.5
N
Tip Diameter (A)
10.0
mm
Tip Length (E)
10.0
mm
1113525 | PLIT-100-160-200-16-G-S3 --- Indexing Plungers - M16 -16x2mm- 32 mm - 1 N - Stainless Steel
Material: Stainless Steel    H: 35.0    Handle Length (G): 40.0 mm   
Part Number: PLIT-100-160-200-16-G-S3 Indexing Plungers - M16 -16x2mm- 32 mm - 1 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$120.23 AUD
$120.23 AUD
Each
Thread (B)
M16 (16x2mm)
Thread Length (F)
32.0
mm
Initial End Force
1.0
N
Final End Force
1.5
N
1113525 | PLIT-100-160-200-16-G-S3 --- Indexing Plungers - M16 -16x2mm- 32 mm - 1 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 10.0 mm    Tip Length (E): 10.0 mm    H: 35.0    Handle Length (G): 40.0 mm   
Part Number: PLIT-100-160-200-16-G-S3 Indexing Plungers - M16 -16x2mm- 32 mm - 1 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$120.23 AUD
$120.23 AUD
Each
View the product page first if you are unsure.
Thread (B)
M16 Extra Fine (16x1.5mm)
Thread Length (F)
32.0
mm
Initial End Force
1.0
N
Final End Force
1.5
N
Tip Diameter (A)
10.0
mm
Tip Length (E)
10.0
mm
1113530 | PLIT-100-160-150-16-G-S3 --- Indexing Plungers - M16 Extra Fine -16x1.5mm- 32 mm - 1 N - Stainless Steel
Material: Stainless Steel    H: 35.0    Handle Length (G): 40.0 mm   
Part Number: PLIT-100-160-150-16-G-S3 Indexing Plungers - M16 Extra Fine -16x1.5mm- 32 mm - 1 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.86 AUD
$115.86 AUD
Each
Thread (B)
M16 Extra Fine (16x1.5mm)
Thread Length (F)
32.0
mm
Initial End Force
1.0
N
Final End Force
1.5
N
1113530 | PLIT-100-160-150-16-G-S3 --- Indexing Plungers - M16 Extra Fine -16x1.5mm- 32 mm - 1 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 10.0 mm    Tip Length (E): 10.0 mm    H: 35.0    Handle Length (G): 40.0 mm   
Part Number: PLIT-100-160-150-16-G-S3 Indexing Plungers - M16 Extra Fine -16x1.5mm- 32 mm - 1 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.86 AUD
$115.86 AUD
Each
View the product page first if you are unsure.
Thread (B)
M16 Extra Fine (16x1.5mm)
Thread Length (F)
25.0
mm
Initial End Force
0.8
N
Final End Force
0.8
N
Tip Diameter (A)
8.0
mm
Tip Length (E)
8.0
mm
1115062 | PLIT-080-160-150-12-G-S3 --- Indexing Plungers - M16 Extra Fine -16x1.5mm- 25 mm - 0.8 N - Stainless Steel
Material: Stainless Steel    H: 35.0    Handle Length (G): 30.0 mm   
Part Number: PLIT-080-160-150-12-G-S3 Indexing Plungers - M16 Extra Fine -16x1.5mm- 25 mm - 0.8 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.86 AUD
$115.86 AUD
Each
Thread (B)
M16 Extra Fine (16x1.5mm)
Thread Length (F)
25.0
mm
Initial End Force
0.8
N
Final End Force
0.8
N
1115062 | PLIT-080-160-150-12-G-S3 --- Indexing Plungers - M16 Extra Fine -16x1.5mm- 25 mm - 0.8 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 8.0 mm    Tip Length (E): 8.0 mm    H: 35.0    Handle Length (G): 30.0 mm   
Part Number: PLIT-080-160-150-12-G-S3 Indexing Plungers - M16 Extra Fine -16x1.5mm- 25 mm - 0.8 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.86 AUD
$115.86 AUD
Each
View the product page first if you are unsure.
Thread (B)
M16 (16x2mm)
Thread Length (F)
32.0
mm
Initial End Force
0.6
N
Final End Force
1.5
N
Tip Diameter (A)
6.0
mm
Tip Length (E)
10.0
mm
1115273 | PLIT-060-160-200-16-G-S3 --- Indexing Plungers - M16 -16x2mm- 32 mm - 0.6 N - Stainless Steel
Material: Stainless Steel    H: 35.0    Handle Length (G): 40.0 mm   
Part Number: PLIT-060-160-200-16-G-S3 Indexing Plungers - M16 -16x2mm- 32 mm - 0.6 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.50 AUD
$115.50 AUD
Each
Thread (B)
M16 (16x2mm)
Thread Length (F)
32.0
mm
Initial End Force
0.6
N
Final End Force
1.5
N
1115273 | PLIT-060-160-200-16-G-S3 --- Indexing Plungers - M16 -16x2mm- 32 mm - 0.6 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 10.0 mm    H: 35.0    Handle Length (G): 40.0 mm   
Part Number: PLIT-060-160-200-16-G-S3 Indexing Plungers - M16 -16x2mm- 32 mm - 0.6 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.50 AUD
$115.50 AUD
Each
View the product page first if you are unsure.
Thread (B)
M16 (16x2mm)
Thread Length (F)
32.0
mm
Initial End Force
0.8
N
Final End Force
1.5
N
Tip Diameter (A)
8.0
mm
Tip Length (E)
10.0
mm
1115281 | PLIT-080-160-200-16-G-S3 --- Indexing Plungers - M16 -16x2mm- 32 mm - 0.8 N - Stainless Steel
Material: Stainless Steel    H: 35.0    Handle Length (G): 40.0 mm   
Part Number: PLIT-080-160-200-16-G-S3 Indexing Plungers - M16 -16x2mm- 32 mm - 0.8 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.68 AUD
$115.68 AUD
Each
Thread (B)
M16 (16x2mm)
Thread Length (F)
32.0
mm
Initial End Force
0.8
N
Final End Force
1.5
N
1115281 | PLIT-080-160-200-16-G-S3 --- Indexing Plungers - M16 -16x2mm- 32 mm - 0.8 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 8.0 mm    Tip Length (E): 10.0 mm    H: 35.0    Handle Length (G): 40.0 mm   
Part Number: PLIT-080-160-200-16-G-S3 Indexing Plungers - M16 -16x2mm- 32 mm - 0.8 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$115.68 AUD
$115.68 AUD
Each
View the product page first if you are unsure.
Thread (B)
3/4-10 UNC (19.05mm)
Thread Length (F)
35.0
mm
Initial End Force
0.8
N
Final End Force
2.0
N
Tip Diameter (A)
8.0
mm
Tip Length (E)
12.0
mm
1119984 | PLIT-080-191C-20-G-S3 --- Indexing Plungers - 3/4-10 UNC -19.05mm- 35 mm - 0.8 N - Stainless Steel
Material: Stainless Steel    H: 28.6    Handle Length (G): 50.0 mm   
Part Number: PLIT-080-191C-20-G-S3 Indexing Plungers - 3/4-10 UNC -19.05mm- 35 mm - 0.8 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$139.86 AUD
$139.86 AUD
Each
Thread (B)
3/4-10 UNC (19.05mm)
Thread Length (F)
35.0
mm
Initial End Force
0.8
N
Final End Force
2.0
N
1119984 | PLIT-080-191C-20-G-S3 --- Indexing Plungers - 3/4-10 UNC -19.05mm- 35 mm - 0.8 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 8.0 mm    Tip Length (E): 12.0 mm    H: 28.6    Handle Length (G): 50.0 mm   
Part Number: PLIT-080-191C-20-G-S3 Indexing Plungers - 3/4-10 UNC -19.05mm- 35 mm - 0.8 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$139.86 AUD
$139.86 AUD
Each
View the product page first if you are unsure.
Thread (B)
3/4-10 UNC (19.05mm)
Thread Length (F)
35.0
mm
Initial End Force
1.0
N
Final End Force
2.0
N
Tip Diameter (A)
10.0
mm
Tip Length (E)
12.0
mm
1119986 | PLIT-100-191C-20-G-S3 --- Indexing Plungers - 3/4-10 UNC -19.05mm- 35 mm - 1 N - Stainless Steel
Material: Stainless Steel    H: 28.6    Handle Length (G): 50.0 mm   
Part Number: PLIT-100-191C-20-G-S3 Indexing Plungers - 3/4-10 UNC -19.05mm- 35 mm - 1 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$92.41 AUD
$92.41 AUD
Each
Thread (B)
3/4-10 UNC (19.05mm)
Thread Length (F)
35.0
mm
Initial End Force
1.0
N
Final End Force
2.0
N
1119986 | PLIT-100-191C-20-G-S3 --- Indexing Plungers - 3/4-10 UNC -19.05mm- 35 mm - 1 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 10.0 mm    Tip Length (E): 12.0 mm    H: 28.6    Handle Length (G): 50.0 mm   
Part Number: PLIT-100-191C-20-G-S3 Indexing Plungers - 3/4-10 UNC -19.05mm- 35 mm - 1 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$92.41 AUD
$92.41 AUD
Each
View the product page first if you are unsure.
Thread (B)
3/4-10 UNC (19.05mm)
Thread Length (F)
35.0
mm
Initial End Force
1.2
N
Final End Force
2.0
N
Tip Diameter (A)
12.0
mm
Tip Length (E)
12.0
mm
1119992 | PLIT-120-191C-20-G-S3 --- Indexing Plungers - 3/4-10 UNC -19.05mm- 35 mm - 1.2 N - Stainless Steel
Material: Stainless Steel    H: 28.6    Handle Length (G): 50.0 mm   
Part Number: PLIT-120-191C-20-G-S3 Indexing Plungers - 3/4-10 UNC -19.05mm- 35 mm - 1.2 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$140.23 AUD
$140.23 AUD
Each
Thread (B)
3/4-10 UNC (19.05mm)
Thread Length (F)
35.0
mm
Initial End Force
1.2
N
Final End Force
2.0
N
1119992 | PLIT-120-191C-20-G-S3 --- Indexing Plungers - 3/4-10 UNC -19.05mm- 35 mm - 1.2 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 12.0 mm    Tip Length (E): 12.0 mm    H: 28.6    Handle Length (G): 50.0 mm   
Part Number: PLIT-120-191C-20-G-S3 Indexing Plungers - 3/4-10 UNC -19.05mm- 35 mm - 1.2 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$140.23 AUD
$140.23 AUD
Each
View the product page first if you are unsure.
Thread (B)
3/4-16 UNF (19.05mm)
Thread Length (F)
35.0
mm
Initial End Force
1.0
N
Final End Force
2.0
N
Tip Diameter (A)
10.0
mm
Tip Length (E)
12.0
mm
1120929 | PLIT-100-191F-20-G-S3 --- Indexing Plungers - 3/4-16 UNF -19.05mm- 35 mm - 1 N - Stainless Steel
Material: Stainless Steel    H: 28.6    Handle Length (G): 50.0 mm   
Part Number: PLIT-100-191F-20-G-S3 Indexing Plungers - 3/4-16 UNF -19.05mm- 35 mm - 1 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$140.50 AUD
$140.50 AUD
Each
Thread (B)
3/4-16 UNF (19.05mm)
Thread Length (F)
35.0
mm
Initial End Force
1.0
N
Final End Force
2.0
N
1120929 | PLIT-100-191F-20-G-S3 --- Indexing Plungers - 3/4-16 UNF -19.05mm- 35 mm - 1 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 10.0 mm    Tip Length (E): 12.0 mm    H: 28.6    Handle Length (G): 50.0 mm   
Part Number: PLIT-100-191F-20-G-S3 Indexing Plungers - 3/4-16 UNF -19.05mm- 35 mm - 1 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$140.50 AUD
$140.50 AUD
Each
View the product page first if you are unsure.
Thread (B)
3/4-16 UNF (19.05mm)
Thread Length (F)
35.0
mm
Initial End Force
0.8
N
Final End Force
2.0
N
Tip Diameter (A)
8.0
mm
Tip Length (E)
12.0
mm
1122719 | PLIT-080-191F-20-G-S3 --- Indexing Plungers - 3/4-16 UNF -19.05mm- 35 mm - 0.8 N - Stainless Steel
Material: Stainless Steel    H: 28.6    Handle Length (G): 50.0 mm   
Part Number: PLIT-080-191F-20-G-S3 Indexing Plungers - 3/4-16 UNF -19.05mm- 35 mm - 0.8 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$140.23 AUD
$140.23 AUD
Each
Thread (B)
3/4-16 UNF (19.05mm)
Thread Length (F)
35.0
mm
Initial End Force
0.8
N
Final End Force
2.0
N
1122719 | PLIT-080-191F-20-G-S3 --- Indexing Plungers - 3/4-16 UNF -19.05mm- 35 mm - 0.8 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 8.0 mm    Tip Length (E): 12.0 mm    H: 28.6    Handle Length (G): 50.0 mm   
Part Number: PLIT-080-191F-20-G-S3 Indexing Plungers - 3/4-16 UNF -19.05mm- 35 mm - 0.8 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$140.23 AUD
$140.23 AUD
Each
View the product page first if you are unsure.
Thread (B)
3/4-16 UNF (19.05mm)
Thread Length (F)
35.0
mm
Initial End Force
1.2
N
Final End Force
2.0
N
Tip Diameter (A)
12.0
mm
Tip Length (E)
12.0
mm
1122727 | PLIT-120-191F-20-G-S3 --- Indexing Plungers - 3/4-16 UNF -19.05mm- 35 mm - 1.2 N - Stainless Steel
Material: Stainless Steel    H: 28.6    Handle Length (G): 50.0 mm   
Part Number: PLIT-120-191F-20-G-S3 Indexing Plungers - 3/4-16 UNF -19.05mm- 35 mm - 1.2 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$93.05 AUD
$93.05 AUD
Each
Thread (B)
3/4-16 UNF (19.05mm)
Thread Length (F)
35.0
mm
Initial End Force
1.2
N
Final End Force
2.0
N
1122727 | PLIT-120-191F-20-G-S3 --- Indexing Plungers - 3/4-16 UNF -19.05mm- 35 mm - 1.2 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 12.0 mm    Tip Length (E): 12.0 mm    H: 28.6    Handle Length (G): 50.0 mm   
Part Number: PLIT-120-191F-20-G-S3 Indexing Plungers - 3/4-16 UNF -19.05mm- 35 mm - 1.2 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$93.05 AUD
$93.05 AUD
Each
View the product page first if you are unsure.
Thread (B)
M20 Extra Fine (20x1.5mm)
Thread Length (F)
35.0
mm
Initial End Force
1.0
N
Final End Force
2.0
N
Tip Diameter (A)
10.0
mm
Tip Length (E)
12.0
mm
1123280 | PLIT-100-200-150-20-G-S3 --- Indexing Plungers - M20 Extra Fine -20x1.5mm- 35 mm - 1 N - Stainless Steel
Material: Stainless Steel    H: 60.0    Handle Length (G): 50.0 mm   
Part Number: PLIT-100-200-150-20-G-S3 Indexing Plungers - M20 Extra Fine -20x1.5mm- 35 mm - 1 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$141.14 AUD
$141.14 AUD
Each
Thread (B)
M20 Extra Fine (20x1.5mm)
Thread Length (F)
35.0
mm
Initial End Force
1.0
N
Final End Force
2.0
N
1123280 | PLIT-100-200-150-20-G-S3 --- Indexing Plungers - M20 Extra Fine -20x1.5mm- 35 mm - 1 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 10.0 mm    Tip Length (E): 12.0 mm    H: 60.0    Handle Length (G): 50.0 mm   
Part Number: PLIT-100-200-150-20-G-S3 Indexing Plungers - M20 Extra Fine -20x1.5mm- 35 mm - 1 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$141.14 AUD
$141.14 AUD
Each
View the product page first if you are unsure.
Thread (B)
M20 (20x2.5mm)
Thread Length (F)
35.0
mm
Initial End Force
1.2
N
Final End Force
2.0
N
Tip Diameter (A)
12.0
mm
Tip Length (E)
12.0
mm
1123283 | PLIT-120-200-250-20-G-S3 --- Indexing Plungers - M20 -20x2.5mm- 35 mm - 1.2 N - Stainless Steel
Material: Stainless Steel    H: 60.0    Handle Length (G): 50.0 mm   
Part Number: PLIT-120-200-250-20-G-S3 Indexing Plungers - M20 -20x2.5mm- 35 mm - 1.2 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$140.95 AUD
$140.95 AUD
Each
Thread (B)
M20 (20x2.5mm)
Thread Length (F)
35.0
mm
Initial End Force
1.2
N
Final End Force
2.0
N
1123283 | PLIT-120-200-250-20-G-S3 --- Indexing Plungers - M20 -20x2.5mm- 35 mm - 1.2 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 12.0 mm    Tip Length (E): 12.0 mm    H: 60.0    Handle Length (G): 50.0 mm   
Part Number: PLIT-120-200-250-20-G-S3 Indexing Plungers - M20 -20x2.5mm- 35 mm - 1.2 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$140.95 AUD
$140.95 AUD
Each
View the product page first if you are unsure.
Thread (B)
M20 Extra Fine (20x1.5mm)
Thread Length (F)
35.0
mm
Initial End Force
1.2
N
Final End Force
2.0
N
Tip Diameter (A)
12.0
mm
Tip Length (E)
12.0
mm
1123289 | PLIT-120-200-150-20-G-S3 --- Indexing Plungers - M20 Extra Fine -20x1.5mm- 35 mm - 1.2 N - Stainless Steel
Material: Stainless Steel    H: 60.0    Handle Length (G): 50.0 mm   
Part Number: PLIT-120-200-150-20-G-S3 Indexing Plungers - M20 Extra Fine -20x1.5mm- 35 mm - 1.2 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$145.68 AUD
$145.68 AUD
Each
Thread (B)
M20 Extra Fine (20x1.5mm)
Thread Length (F)
35.0
mm
Initial End Force
1.2
N
Final End Force
2.0
N
1123289 | PLIT-120-200-150-20-G-S3 --- Indexing Plungers - M20 Extra Fine -20x1.5mm- 35 mm - 1.2 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 12.0 mm    Tip Length (E): 12.0 mm    H: 60.0    Handle Length (G): 50.0 mm   
Part Number: PLIT-120-200-150-20-G-S3 Indexing Plungers - M20 Extra Fine -20x1.5mm- 35 mm - 1.2 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$145.68 AUD
$145.68 AUD
Each
View the product page first if you are unsure.
Thread (B)
M20 (20x2.5mm)
Thread Length (F)
35.0
mm
Initial End Force
0.8
N
Final End Force
2.0
N
Tip Diameter (A)
8.0
mm
Tip Length (E)
12.0
mm
1125008 | PLIT-080-200-250-20-G-S3 --- Indexing Plungers - M20 -20x2.5mm- 35 mm - 0.8 N - Stainless Steel
Material: Stainless Steel    H: 60.0    Handle Length (G): 50.0 mm   
Part Number: PLIT-080-200-250-20-G-S3 Indexing Plungers - M20 -20x2.5mm- 35 mm - 0.8 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$140.41 AUD
$140.41 AUD
Each
Thread (B)
M20 (20x2.5mm)
Thread Length (F)
35.0
mm
Initial End Force
0.8
N
Final End Force
2.0
N
1125008 | PLIT-080-200-250-20-G-S3 --- Indexing Plungers - M20 -20x2.5mm- 35 mm - 0.8 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 8.0 mm    Tip Length (E): 12.0 mm    H: 60.0    Handle Length (G): 50.0 mm   
Part Number: PLIT-080-200-250-20-G-S3 Indexing Plungers - M20 -20x2.5mm- 35 mm - 0.8 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$140.41 AUD
$140.41 AUD
Each
View the product page first if you are unsure.
Thread (B)
M20 Extra Fine (20x1.5mm)
Thread Length (F)
35.0
mm
Initial End Force
0.8
N
Final End Force
2.0
N
Tip Diameter (A)
8.0
mm
Tip Length (E)
12.0
mm
1125014 | PLIT-080-200-150-20-G-S3 --- Indexing Plungers - M20 Extra Fine -20x1.5mm- 35 mm - 0.8 N - Stainless Steel
Material: Stainless Steel    H: 60.0    Handle Length (G): 50.0 mm   
Part Number: PLIT-080-200-150-20-G-S3 Indexing Plungers - M20 Extra Fine -20x1.5mm- 35 mm - 0.8 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$140.95 AUD
$140.95 AUD
Each
Thread (B)
M20 Extra Fine (20x1.5mm)
Thread Length (F)
35.0
mm
Initial End Force
0.8
N
Final End Force
2.0
N
1125014 | PLIT-080-200-150-20-G-S3 --- Indexing Plungers - M20 Extra Fine -20x1.5mm- 35 mm - 0.8 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 8.0 mm    Tip Length (E): 12.0 mm    H: 60.0    Handle Length (G): 50.0 mm   
Part Number: PLIT-080-200-150-20-G-S3 Indexing Plungers - M20 Extra Fine -20x1.5mm- 35 mm - 0.8 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$140.95 AUD
$140.95 AUD
Each
View the product page first if you are unsure.
Thread (B)
M20 (20x2.5mm)
Thread Length (F)
35.0
mm
Initial End Force
1.0
N
Final End Force
2.0
N
Tip Diameter (A)
10.0
mm
Tip Length (E)
12.0
mm
1125017 | PLIT-100-200-250-20-G-S3 --- Indexing Plungers - M20 -20x2.5mm- 35 mm - 1 N - Stainless Steel
Material: Stainless Steel    H: 60.0    Handle Length (G): 50.0 mm   
Part Number: PLIT-100-200-250-20-G-S3 Indexing Plungers - M20 -20x2.5mm- 35 mm - 1 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$140.59 AUD
$140.59 AUD
Each
Thread (B)
M20 (20x2.5mm)
Thread Length (F)
35.0
mm
Initial End Force
1.0
N
Final End Force
2.0
N
1125017 | PLIT-100-200-250-20-G-S3 --- Indexing Plungers - M20 -20x2.5mm- 35 mm - 1 N - Stainless Steel
Material: Stainless Steel    Tip Diameter (A): 10.0 mm    Tip Length (E): 12.0 mm    H: 60.0    Handle Length (G): 50.0 mm   
Part Number: PLIT-100-200-250-20-G-S3 Indexing Plungers - M20 -20x2.5mm- 35 mm - 1 N - Stainless Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, May 18, 2025
$140.59 AUD
$140.59 AUD
Each
View the product page first if you are unsure.