Plungers - Indexing - Grip - Stainless - Without Nut

Plungers -> Indexing -> Grip -> Stainless -> Without Nut

There are 48 products in the sub-categories of Plungers - Indexing - Grip - Stainless - Without Nut. Scroll down or follow the link to Plungers - Indexing - Grip - Stainless - Without Nut in the products table to see all these items combined into a handy table with filters.

Category Details

A selection of Without Nut Stainless Grip Indexing Plungers. Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.

    Miniature Bearings Australia - MBA Minibearings

    Additional resources:


    A more concise listing may be found in the Plungers - Indexing - Grip - Stainless - Without Nut category on the Small Parts & Bearings online store.
    Thread (B) Thread Length (F) Initial End Force Final End Force Tip Diameter (A) Tip Length (E) Indicative
    Image
    Thread (B)
    3/8-16 UNC (9.53mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.4
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    4.0
    mm
    Tip Length (E)
    6.0
    mm
    		Indexing Plungers - 3/8-16 UNC - 9.53mm - 20 mm - 0.4 N Grip - Stainless Steel
    Material: Stainless Steel    H: 14.3    Handle Length (G): 25.0 mm   
    Part Number: PLIT-040-095C-10-G-S3
    Indexing Plungers - 3/8-16 UNC - 9.53mm - 20 mm - 0.4 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $74.59 AUD
    $74.59 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B) Thread Length (F) Initial End Force Final End Force Indicative
    Image
    Thread (B)
    3/8-16 UNC (9.53mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.4
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - 3/8-16 UNC - 9.53mm - 20 mm - 0.4 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 4.0 mm    Tip Length (E): 6.0 mm    H: 14.3    Handle Length (G): 25.0 mm   
    Part Number: PLIT-040-095C-10-G-S3
    Indexing Plungers - 3/8-16 UNC - 9.53mm - 20 mm - 0.4 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $74.59 AUD
    $74.59 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    3/8-16 UNC (9.53mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.5
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    5.0
    mm
    Tip Length (E)
    6.0
    mm
    		Indexing Plungers - 3/8-16 UNC - 9.53mm - 20 mm - 0.5 N Grip - Stainless Steel
    Material: Stainless Steel    H: 14.3    Handle Length (G): 25.0 mm   
    Part Number: PLIT-050-095C-10-G-S3
    Indexing Plungers - 3/8-16 UNC - 9.53mm - 20 mm - 0.5 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $63.68 AUD
    $76.42 AUD $63.68 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    3/8-16 UNC (9.53mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.5
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - 3/8-16 UNC - 9.53mm - 20 mm - 0.5 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 5.0 mm    Tip Length (E): 6.0 mm    H: 14.3    Handle Length (G): 25.0 mm   
    Part Number: PLIT-050-095C-10-G-S3
    Indexing Plungers - 3/8-16 UNC - 9.53mm - 20 mm - 0.5 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $63.68 AUD
    $76.42 AUD $63.68 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    3/8-16 UNC (9.53mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.6
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    6.0
    mm
    Tip Length (E)
    6.0
    mm
    		Indexing Plungers - 3/8-16 UNC - 9.53mm - 20 mm - 0.6 N Grip - Stainless Steel
    Material: Stainless Steel    H: 14.3    Handle Length (G): 25.0 mm   
    Part Number: PLIT-060-095C-10-G-S3
    Indexing Plungers - 3/8-16 UNC - 9.53mm - 20 mm - 0.6 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $63.68 AUD
    $76.42 AUD $63.68 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    3/8-16 UNC (9.53mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.6
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - 3/8-16 UNC - 9.53mm - 20 mm - 0.6 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 6.0 mm    H: 14.3    Handle Length (G): 25.0 mm   
    Part Number: PLIT-060-095C-10-G-S3
    Indexing Plungers - 3/8-16 UNC - 9.53mm - 20 mm - 0.6 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $63.68 AUD
    $76.42 AUD $63.68 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    3/8-24 UNF (9.53mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.4
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    4.0
    mm
    Tip Length (E)
    6.0
    mm
    		Indexing Plungers - 3/8-24 UNF - 9.53mm - 20 mm - 0.4 N Grip - Stainless Steel
    Material: Stainless Steel    H: 14.3    Handle Length (G): 25.0 mm   
    Part Number: PLIT-040-095F-10-G-S3
    Indexing Plungers - 3/8-24 UNF - 9.53mm - 20 mm - 0.4 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $63.68 AUD
    $76.42 AUD $63.68 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    3/8-24 UNF (9.53mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.4
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - 3/8-24 UNF - 9.53mm - 20 mm - 0.4 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 4.0 mm    Tip Length (E): 6.0 mm    H: 14.3    Handle Length (G): 25.0 mm   
    Part Number: PLIT-040-095F-10-G-S3
    Indexing Plungers - 3/8-24 UNF - 9.53mm - 20 mm - 0.4 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $63.68 AUD
    $76.42 AUD $63.68 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    3/8-24 UNF (9.53mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.5
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    5.0
    mm
    Tip Length (E)
    6.0
    mm
    		Indexing Plungers - 3/8-24 UNF - 9.53mm - 20 mm - 0.5 N Grip - Stainless Steel
    Material: Stainless Steel    H: 14.3    Handle Length (G): 25.0 mm   
    Part Number: PLIT-050-095F-10-G-S3
    Indexing Plungers - 3/8-24 UNF - 9.53mm - 20 mm - 0.5 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $63.77 AUD
    $76.53 AUD $63.77 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    3/8-24 UNF (9.53mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.5
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - 3/8-24 UNF - 9.53mm - 20 mm - 0.5 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 5.0 mm    Tip Length (E): 6.0 mm    H: 14.3    Handle Length (G): 25.0 mm   
    Part Number: PLIT-050-095F-10-G-S3
    Indexing Plungers - 3/8-24 UNF - 9.53mm - 20 mm - 0.5 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $63.77 AUD
    $76.53 AUD $63.77 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    3/8-24 UNF (9.53mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.6
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    6.0
    mm
    Tip Length (E)
    6.0
    mm
    		Indexing Plungers - 3/8-24 UNF - 9.53mm - 20 mm - 0.6 N Grip - Stainless Steel
    Material: Stainless Steel    H: 14.3    Handle Length (G): 25.0 mm   
    Part Number: PLIT-060-095F-10-G-S3
    Indexing Plungers - 3/8-24 UNF - 9.53mm - 20 mm - 0.6 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $88.77 AUD
    $106.53 AUD $88.77 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    3/8-24 UNF (9.53mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.6
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - 3/8-24 UNF - 9.53mm - 20 mm - 0.6 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 6.0 mm    H: 14.3    Handle Length (G): 25.0 mm   
    Part Number: PLIT-060-095F-10-G-S3
    Indexing Plungers - 3/8-24 UNF - 9.53mm - 20 mm - 0.6 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $88.77 AUD
    $106.53 AUD $88.77 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M10 (10x1.5mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.4
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    4.0
    mm
    Tip Length (E)
    6.0
    mm
    		Indexing Plungers - M10 - 10x1.5mm - 20 mm - 0.4 N Grip - Stainless Steel
    Material: Stainless Steel    H: 14.0    Handle Length (G): 25.0 mm   
    Part Number: PLIT-040-100-150-10-G-S3
    Indexing Plungers - M10 - 10x1.5mm - 20 mm - 0.4 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $63.68 AUD
    $76.42 AUD $63.68 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M10 (10x1.5mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.4
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - M10 - 10x1.5mm - 20 mm - 0.4 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 4.0 mm    Tip Length (E): 6.0 mm    H: 14.0    Handle Length (G): 25.0 mm   
    Part Number: PLIT-040-100-150-10-G-S3
    Indexing Plungers - M10 - 10x1.5mm - 20 mm - 0.4 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $63.68 AUD
    $76.42 AUD $63.68 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M10x1 (Extra Fine)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.4
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    4.0
    mm
    Tip Length (E)
    6.0
    mm
    		Indexing Plungers - M10x1 - Extra Fine - 20 mm - 0.4 N Grip - Stainless Steel
    Material: Stainless Steel    H: 14.0    Handle Length (G): 25.0 mm   
    Part Number: PLIT-040-100-100-10-G-S3
    Indexing Plungers - M10x1 - Extra Fine - 20 mm - 0.4 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $63.77 AUD
    $76.53 AUD $63.77 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M10x1 (Extra Fine)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.4
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - M10x1 - Extra Fine - 20 mm - 0.4 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 4.0 mm    Tip Length (E): 6.0 mm    H: 14.0    Handle Length (G): 25.0 mm   
    Part Number: PLIT-040-100-100-10-G-S3
    Indexing Plungers - M10x1 - Extra Fine - 20 mm - 0.4 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $63.77 AUD
    $76.53 AUD $63.77 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M10 (10x1.5mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.5
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    5.0
    mm
    Tip Length (E)
    6.0
    mm
    		Indexing Plungers - M10 - 10x1.5mm - 20 mm - 0.5 N Grip - Stainless Steel
    Material: Stainless Steel    H: 14.0    Handle Length (G): 25.0 mm   
    Part Number: PLIT-050-100-150-10-G-S3
    Indexing Plungers - M10 - 10x1.5mm - 20 mm - 0.5 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $63.68 AUD
    $76.42 AUD $63.68 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M10 (10x1.5mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.5
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - M10 - 10x1.5mm - 20 mm - 0.5 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 5.0 mm    Tip Length (E): 6.0 mm    H: 14.0    Handle Length (G): 25.0 mm   
    Part Number: PLIT-050-100-150-10-G-S3
    Indexing Plungers - M10 - 10x1.5mm - 20 mm - 0.5 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $63.68 AUD
    $76.42 AUD $63.68 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M10x1 (Extra Fine)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.5
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    5.0
    mm
    Tip Length (E)
    6.0
    mm
    		Indexing Plungers - M10x1 - Extra Fine - 20 mm - 0.5 N Grip - Stainless Steel
    Material: Stainless Steel    H: 14.0    Handle Length (G): 25.0 mm   
    Part Number: PLIT-050-100-100-10-G-S3
    Indexing Plungers - M10x1 - Extra Fine - 20 mm - 0.5 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $68.05 AUD
    $81.65 AUD $68.05 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M10x1 (Extra Fine)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.5
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - M10x1 - Extra Fine - 20 mm - 0.5 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 5.0 mm    Tip Length (E): 6.0 mm    H: 14.0    Handle Length (G): 25.0 mm   
    Part Number: PLIT-050-100-100-10-G-S3
    Indexing Plungers - M10x1 - Extra Fine - 20 mm - 0.5 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $68.05 AUD
    $81.65 AUD $68.05 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M10 (10x1.5mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.6
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    6.0
    mm
    Tip Length (E)
    6.0
    mm
    		Indexing Plungers - M10 - 10x1.5mm - 20 mm - 0.6 N Grip - Stainless Steel
    Material: Stainless Steel    H: 14.0    Handle Length (G): 25.0 mm   
    Part Number: PLIT-060-100-150-10-G-S3
    Indexing Plungers - M10 - 10x1.5mm - 20 mm - 0.6 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $63.77 AUD
    $76.53 AUD $63.77 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M10 (10x1.5mm)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.6
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - M10 - 10x1.5mm - 20 mm - 0.6 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 6.0 mm    H: 14.0    Handle Length (G): 25.0 mm   
    Part Number: PLIT-060-100-150-10-G-S3
    Indexing Plungers - M10 - 10x1.5mm - 20 mm - 0.6 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $63.77 AUD
    $76.53 AUD $63.77 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M10x1 (Extra Fine)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.6
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    6.0
    mm
    Tip Length (E)
    6.0
    mm
    		Indexing Plungers - M10x1 - Extra Fine - 20 mm - 0.6 N Grip - Stainless Steel
    Material: Stainless Steel    H: 14.0    Handle Length (G): 25.0 mm   
    Part Number: PLIT-060-100-100-10-G-S3
    Indexing Plungers - M10x1 - Extra Fine - 20 mm - 0.6 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $68.05 AUD
    $81.65 AUD $68.05 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M10x1 (Extra Fine)

    Thread Length (F)
    20.0
    mm

    (Equiv. 0.787 in.)
    Initial End Force
    0.6
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - M10x1 - Extra Fine - 20 mm - 0.6 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 6.0 mm    H: 14.0    Handle Length (G): 25.0 mm   
    Part Number: PLIT-060-100-100-10-G-S3
    Indexing Plungers - M10x1 - Extra Fine - 20 mm - 0.6 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $68.05 AUD
    $81.65 AUD $68.05 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M12 (12x1.75mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.5
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    5.0
    mm
    Tip Length (E)
    8.0
    mm
    		Indexing Plungers - M12 - 12x1.75mm - 25 mm - 0.5 N Grip - Stainless Steel
    Material: Stainless Steel    H: 15.0    Handle Length (G): 30.0 mm   
    Part Number: PLIT-050-120-175-12-G-S3
    Indexing Plungers - M12 - 12x1.75mm - 25 mm - 0.5 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.05 AUD
    $84.05 AUD $70.05 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M12 (12x1.75mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.5
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - M12 - 12x1.75mm - 25 mm - 0.5 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 5.0 mm    Tip Length (E): 8.0 mm    H: 15.0    Handle Length (G): 30.0 mm   
    Part Number: PLIT-050-120-175-12-G-S3
    Indexing Plungers - M12 - 12x1.75mm - 25 mm - 0.5 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.05 AUD
    $84.05 AUD $70.05 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M12x1.5 (Fine)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.5
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    5.0
    mm
    Tip Length (E)
    8.0
    mm
    		Indexing Plungers - M12x1.5 - Fine - 25 mm - 0.5 N Grip - Stainless Steel
    Material: Stainless Steel    H: 15.0    Handle Length (G): 30.0 mm   
    Part Number: PLIT-050-120-150-12-G-S3
    Indexing Plungers - M12x1.5 - Fine - 25 mm - 0.5 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.14 AUD
    $84.16 AUD $70.14 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M12x1.5 (Fine)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.5
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - M12x1.5 - Fine - 25 mm - 0.5 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 5.0 mm    Tip Length (E): 8.0 mm    H: 15.0    Handle Length (G): 30.0 mm   
    Part Number: PLIT-050-120-150-12-G-S3
    Indexing Plungers - M12x1.5 - Fine - 25 mm - 0.5 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.14 AUD
    $84.16 AUD $70.14 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M12 (12x1.75mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.6
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    6.0
    mm
    Tip Length (E)
    8.0
    mm
    		Indexing Plungers - M12 - 12x1.75mm - 25 mm - 0.6 N Grip - Stainless Steel
    Material: Stainless Steel    H: 15.0    Handle Length (G): 30.0 mm   
    Part Number: PLIT-060-120-175-12-G-S3
    Indexing Plungers - M12 - 12x1.75mm - 25 mm - 0.6 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.14 AUD
    $84.16 AUD $70.14 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M12 (12x1.75mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.6
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - M12 - 12x1.75mm - 25 mm - 0.6 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 8.0 mm    H: 15.0    Handle Length (G): 30.0 mm   
    Part Number: PLIT-060-120-175-12-G-S3
    Indexing Plungers - M12 - 12x1.75mm - 25 mm - 0.6 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.14 AUD
    $84.16 AUD $70.14 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M12x1.5 (Fine)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.6
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    6.0
    mm
    Tip Length (E)
    8.0
    mm
    		Indexing Plungers - M12x1.5 - Fine - 25 mm - 0.6 N Grip - Stainless Steel
    Material: Stainless Steel    H: 15.0    Handle Length (G): 30.0 mm   
    Part Number: PLIT-060-120-150-12-G-S3
    Indexing Plungers - M12x1.5 - Fine - 25 mm - 0.6 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.14 AUD
    $84.16 AUD $70.14 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M12x1.5 (Fine)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.6
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - M12x1.5 - Fine - 25 mm - 0.6 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 8.0 mm    H: 15.0    Handle Length (G): 30.0 mm   
    Part Number: PLIT-060-120-150-12-G-S3
    Indexing Plungers - M12x1.5 - Fine - 25 mm - 0.6 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.14 AUD
    $84.16 AUD $70.14 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M12 (12x1.75mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.8
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    8.0
    mm
    Tip Length (E)
    8.0
    mm
    		Indexing Plungers - M12 - 12x1.75mm - 25 mm - 0.8 N Grip - Stainless Steel
    Material: Stainless Steel    H: 15.0    Handle Length (G): 30.0 mm   
    Part Number: PLIT-080-120-175-12-G-S3
    Indexing Plungers - M12 - 12x1.75mm - 25 mm - 0.8 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.14 AUD
    $84.16 AUD $70.14 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M12 (12x1.75mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.8
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - M12 - 12x1.75mm - 25 mm - 0.8 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 8.0 mm    Tip Length (E): 8.0 mm    H: 15.0    Handle Length (G): 30.0 mm   
    Part Number: PLIT-080-120-175-12-G-S3
    Indexing Plungers - M12 - 12x1.75mm - 25 mm - 0.8 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.14 AUD
    $84.16 AUD $70.14 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M12x1.5 (Fine)

    Thread Length (F)
    32.0
    mm

    (Equiv. 1.26 in.)
    Initial End Force
    0.8
    N
    Final End Force
    1.5
    N
    Tip Diameter (A)
    8.0
    mm
    Tip Length (E)
    10.0
    mm
    		Indexing Plungers - M12x1.5 - Fine - 32 mm - 0.8 N Grip - Stainless Steel
    Material: Stainless Steel    H: 35.0    Handle Length (G): 40.0 mm   
    Part Number: PLIT-080-120-150-16-G-S3
    Indexing Plungers - M12x1.5 - Fine - 32 mm - 0.8 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.14 AUD
    $84.16 AUD $70.14 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    M12x1.5 (Fine)

    Thread Length (F)
    32.0
    mm

    (Equiv. 1.26 in.)
    Initial End Force
    0.8
    N
    Final End Force
    1.5
    N
    		Indexing Plungers - M12x1.5 - Fine - 32 mm - 0.8 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 8.0 mm    Tip Length (E): 10.0 mm    H: 35.0    Handle Length (G): 40.0 mm   
    Part Number: PLIT-080-120-150-16-G-S3
    Indexing Plungers - M12x1.5 - Fine - 32 mm - 0.8 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.14 AUD
    $84.16 AUD $70.14 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    1/2-13 UNC (12.7mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.5
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    5.0
    mm
    Tip Length (E)
    8.0
    mm
    		Indexing Plungers - 1/2-13 UNC - 12.7mm - 25 mm - 0.5 N Grip - Stainless Steel
    Material: Stainless Steel    H: 19.1    Handle Length (G): 30.0 mm   
    Part Number: PLIT-050-127C-12-G-S3
    Indexing Plungers - 1/2-13 UNC - 12.7mm - 25 mm - 0.5 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.23 AUD
    $84.27 AUD $70.23 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    1/2-13 UNC (12.7mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.5
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - 1/2-13 UNC - 12.7mm - 25 mm - 0.5 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 5.0 mm    Tip Length (E): 8.0 mm    H: 19.1    Handle Length (G): 30.0 mm   
    Part Number: PLIT-050-127C-12-G-S3
    Indexing Plungers - 1/2-13 UNC - 12.7mm - 25 mm - 0.5 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.23 AUD
    $84.27 AUD $70.23 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    1/2-13 UNC (12.7mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.6
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    6.0
    mm
    Tip Length (E)
    8.0
    mm
    		Indexing Plungers - 1/2-13 UNC - 12.7mm - 25 mm - 0.6 N Grip - Stainless Steel
    Material: Stainless Steel    H: 19.1    Handle Length (G): 30.0 mm   
    Part Number: PLIT-060-127C-12-G-S3
    Indexing Plungers - 1/2-13 UNC - 12.7mm - 25 mm - 0.6 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.23 AUD
    $84.27 AUD $70.23 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    1/2-13 UNC (12.7mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.6
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - 1/2-13 UNC - 12.7mm - 25 mm - 0.6 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 8.0 mm    H: 19.1    Handle Length (G): 30.0 mm   
    Part Number: PLIT-060-127C-12-G-S3
    Indexing Plungers - 1/2-13 UNC - 12.7mm - 25 mm - 0.6 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.23 AUD
    $84.27 AUD $70.23 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    1/2-13 UNC (12.7mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.8
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    8.0
    mm
    Tip Length (E)
    8.0
    mm
    		Indexing Plungers - 1/2-13 UNC - 12.7mm - 25 mm - 0.8 N Grip - Stainless Steel
    Material: Stainless Steel    H: 19.1    Handle Length (G): 30.0 mm   
    Part Number: PLIT-080-127C-12-G-S3
    Indexing Plungers - 1/2-13 UNC - 12.7mm - 25 mm - 0.8 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.32 AUD
    $84.38 AUD $70.32 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    1/2-13 UNC (12.7mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.8
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - 1/2-13 UNC - 12.7mm - 25 mm - 0.8 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 8.0 mm    Tip Length (E): 8.0 mm    H: 19.1    Handle Length (G): 30.0 mm   
    Part Number: PLIT-080-127C-12-G-S3
    Indexing Plungers - 1/2-13 UNC - 12.7mm - 25 mm - 0.8 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.32 AUD
    $84.38 AUD $70.32 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    1/2-20 UNF (12.7mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.5
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    5.0
    mm
    Tip Length (E)
    8.0
    mm
    		Indexing Plungers - 1/2-20 UNF - 12.7mm - 25 mm - 0.5 N Grip - Stainless Steel
    Material: Stainless Steel    H: 19.1    Handle Length (G): 30.0 mm   
    Part Number: PLIT-050-127F-12-G-S3
    Indexing Plungers - 1/2-20 UNF - 12.7mm - 25 mm - 0.5 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.32 AUD
    $84.38 AUD $70.32 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    1/2-20 UNF (12.7mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.5
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - 1/2-20 UNF - 12.7mm - 25 mm - 0.5 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 5.0 mm    Tip Length (E): 8.0 mm    H: 19.1    Handle Length (G): 30.0 mm   
    Part Number: PLIT-050-127F-12-G-S3
    Indexing Plungers - 1/2-20 UNF - 12.7mm - 25 mm - 0.5 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.32 AUD
    $84.38 AUD $70.32 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    1/2-20 UNF (12.7mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.6
    N
    Final End Force
    0.8
    N
    Tip Diameter (A)
    6.0
    mm
    Tip Length (E)
    8.0
    mm
    		Indexing Plungers - 1/2-20 UNF - 12.7mm - 25 mm - 0.6 N Grip - Stainless Steel
    Material: Stainless Steel    H: 19.1    Handle Length (G): 30.0 mm   
    Part Number: PLIT-060-127F-12-G-S3
    Indexing Plungers - 1/2-20 UNF - 12.7mm - 25 mm - 0.6 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.32 AUD
    $84.38 AUD $70.32 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    1/2-20 UNF (12.7mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.6
    N
    Final End Force
    0.8
    N
    		Indexing Plungers - 1/2-20 UNF - 12.7mm - 25 mm - 0.6 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 6.0 mm    Tip Length (E): 8.0 mm    H: 19.1    Handle Length (G): 30.0 mm   
    Part Number: PLIT-060-127F-12-G-S3
    Indexing Plungers - 1/2-20 UNF - 12.7mm - 25 mm - 0.6 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.32 AUD
    $84.38 AUD $70.32 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    1/2-20 UNF (12.7mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.8
    N
    Final End Force
    1.5
    N
    Tip Diameter (A)
    8.0
    mm
    Tip Length (E)
    8.0
    mm
    		Indexing Plungers - 1/2-20 UNF - 12.7mm - 25 mm - 0.8 N Grip - Stainless Steel
    Material: Stainless Steel    H: 19.1    Handle Length (G): 30.0 mm   
    Part Number: PLIT-080-127F-12-G-S3
    Indexing Plungers - 1/2-20 UNF - 12.7mm - 25 mm - 0.8 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.41 AUD
    $84.49 AUD $70.41 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.
    Thread (B)
    1/2-20 UNF (12.7mm)

    Thread Length (F)
    25.0
    mm

    (Equiv. 0.984 in.)
    Initial End Force
    0.8
    N
    Final End Force
    1.5
    N
    		Indexing Plungers - 1/2-20 UNF - 12.7mm - 25 mm - 0.8 N Grip - Stainless Steel
    Material: Stainless Steel    Tip Diameter (A): 8.0 mm    Tip Length (E): 8.0 mm    H: 19.1    Handle Length (G): 30.0 mm   
    Part Number: PLIT-080-127F-12-G-S3
    Indexing Plungers - 1/2-20 UNF - 12.7mm - 25 mm - 0.8 N Grip - Stainless Steel Plunger
    Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 30, 2025
    $70.41 AUD
    $84.49 AUD $70.41 AUD
    Excludes GST and overseas Taxes & Duties
    Each
    Quantity Required

    Backorder: Out of Stock.