Washers - Self Aligning - Sets - Plastic

Washers -> Self Aligning -> Sets -> Plastic

There are 7 products in the sub-categories of Washers - Self Aligning - Sets - Plastic. Browse the Washers - Self Aligning - Sets - Plastic products table.

Category Details

A selection of Plastic Sets Self Aligning Washers. Complete set, containing both aligning and seating washers.

  • Self-aligning washers are designed to compensate for misalignment between connected parts. An expanded range may be available on special order. Please enquire.
  • Consists of a convex and concave washer that swivel slightly when nested, allowing them to adapt to slight angles and uneven surfaces. This helps to distribute load evenly and reduce stress on the connection.
  • Tensile strengths shown are Static Axial in Newtons.
  • Easy to install.
  • Good friction wear properties.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Washers - Self Aligning - Sets - Plastic category on the Small Parts & Bearings online store.
Nominal Inside Diameter (B) Housing Pad Bore (d3) OD (d2) Ball socket (h1) Spherical Disk (h2) Overall Height (H) Indicative
Image
Nominal Inside Diameter (B)
5.00
mm
+ 0.20 / - 0.00
(Equiv. 0.197 in.)
Housing Pad Bore (d3)
7.00
mm

(Equiv. 0.276 in.)
OD (d2)
15.00
mm

(Equiv. 0.591 in.)
Ball socket (h1)
3.00
mm
Spherical Disk (h2)
3.50
mm
Overall Height (H)
4.70
mm
Self Aligning Washers - 5x7x15 mm Sets
Material: Carbon Spring Steel Self Finish    Radius (R): 15.00 mm    Compensation angle: 3 °    Short Term Max Tensile Strngth: 4000 N    Long Term Max Tensile Strength: 2000 N   
Part Number: W0050-ALN-W-SET (10 Pcs)
Self Aligning Washers - 5x7x15 mm Sets - Carbon Spring Steel Self Finish Washer
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 08, 2025
$173.50 AUD
$173.50 AUD
Per 10
Quantity Required

Backorder: Out of Stock.
Nominal Inside Diameter (B) Housing Pad Bore (d3) OD (d2) Ball socket (h1) Indicative
Image
Nominal Inside Diameter (B)
5.00
mm
+ 0.20 / - 0.00
(Equiv. 0.197 in.)
Housing Pad Bore (d3)
7.00
mm

(Equiv. 0.276 in.)
OD (d2)
15.00
mm

(Equiv. 0.591 in.)
Ball socket (h1)
3.00
mm
Self Aligning Washers - 5x7x15 mm Sets
Material: Carbon Spring Steel Self Finish    Spherical Disk (h2): 3.50 mm    Overall Height (H): 4.70 mm    Radius (R): 15.00 mm    Compensation angle: 3 °    Short Term Max Tensile Strngth: 4000 N    Long Term Max Tensile Strength: 2000 N   
Part Number: W0050-ALN-W-SET (10 Pcs)
Self Aligning Washers - 5x7x15 mm Sets - Carbon Spring Steel Self Finish Washer
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 08, 2025
$173.50 AUD
$173.50 AUD
Per 10
Quantity Required

Backorder: Out of Stock.
Nominal Inside Diameter (B)
6.00
mm
+ 0.20 / - 0.00
(Equiv. 0.236 in.)
Housing Pad Bore (d3)
7.50
mm

(Equiv. 0.295 in.)
OD (d2)
16.00
mm

(Equiv. 0.63 in.)
Ball socket (h1)
3.00
mm
Spherical Disk (h2)
4.00
mm
Overall Height (H)
5.30
mm
Self Aligning Washers - 6x7.5x16 mm Sets
Material: Carbon Spring Steel Self Finish    Radius (R): 16.00 mm    Compensation angle: 3 °    Short Term Max Tensile Strngth: 5000 N    Long Term Max Tensile Strength: 2500 N   
Part Number: W0060-ALN-W-SET (10 Pcs)
Self Aligning Washers - 6x7.5x16 mm Sets - Carbon Spring Steel Self Finish Washer
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 08, 2025
$141.14 AUD
$169.36 AUD $141.14 AUD
Per 10
Quantity Required

Backorder: Out of Stock.
Nominal Inside Diameter (B)
6.00
mm
+ 0.20 / - 0.00
(Equiv. 0.236 in.)
Housing Pad Bore (d3)
7.50
mm

(Equiv. 0.295 in.)
OD (d2)
16.00
mm

(Equiv. 0.63 in.)
Ball socket (h1)
3.00
mm
Self Aligning Washers - 6x7.5x16 mm Sets
Material: Carbon Spring Steel Self Finish    Spherical Disk (h2): 4.00 mm    Overall Height (H): 5.30 mm    Radius (R): 16.00 mm    Compensation angle: 3 °    Short Term Max Tensile Strngth: 5000 N    Long Term Max Tensile Strength: 2500 N   
Part Number: W0060-ALN-W-SET (10 Pcs)
Self Aligning Washers - 6x7.5x16 mm Sets - Carbon Spring Steel Self Finish Washer
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 08, 2025
$141.14 AUD
$169.36 AUD $141.14 AUD
Per 10
Quantity Required

Backorder: Out of Stock.
Nominal Inside Diameter (B)
8.00
mm
+ 0.20 / - 0.00
(Equiv. 0.315 in.)
Housing Pad Bore (d3)
10.00
mm

(Equiv. 0.394 in.)
OD (d2)
20.00
mm

(Equiv. 0.787 in.)
Ball socket (h1)
4.00
mm
Spherical Disk (h2)
5.00
mm
Overall Height (H)
6.80
mm
Self Aligning Washers - 8x10x20 mm Sets
Material: Carbon Spring Steel Self Finish    Radius (R): 20.00 mm    Compensation angle: 2 °    Short Term Max Tensile Strngth: 8000 N    Long Term Max Tensile Strength: 4000 N   
Part Number: W0080-ALN-W-SET (10 Pcs)
Self Aligning Washers - 8x10x20 mm Sets - Carbon Spring Steel Self Finish Washer
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 08, 2025
$156.05 AUD
$187.25 AUD $156.05 AUD
Per 10
Quantity Required

Backorder: Out of Stock.
Nominal Inside Diameter (B)
8.00
mm
+ 0.20 / - 0.00
(Equiv. 0.315 in.)
Housing Pad Bore (d3)
10.00
mm

(Equiv. 0.394 in.)
OD (d2)
20.00
mm

(Equiv. 0.787 in.)
Ball socket (h1)
4.00
mm
Self Aligning Washers - 8x10x20 mm Sets
Material: Carbon Spring Steel Self Finish    Spherical Disk (h2): 5.00 mm    Overall Height (H): 6.80 mm    Radius (R): 20.00 mm    Compensation angle: 2 °    Short Term Max Tensile Strngth: 8000 N    Long Term Max Tensile Strength: 4000 N   
Part Number: W0080-ALN-W-SET (10 Pcs)
Self Aligning Washers - 8x10x20 mm Sets - Carbon Spring Steel Self Finish Washer
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 08, 2025
$156.05 AUD
$187.25 AUD $156.05 AUD
Per 10
Quantity Required

Backorder: Out of Stock.
Nominal Inside Diameter (B)
10.00
mm
+ 0.20 / - 0.00
(Equiv. 0.394 in.)
Housing Pad Bore (d3)
12.00
mm

(Equiv. 0.472 in.)
OD (d2)
24.00
mm

(Equiv. 0.945 in.)
Ball socket (h1)
4.50
mm
Spherical Disk (h2)
5.50
mm
Overall Height (H)
7.50
mm
Self Aligning Washers - 10x12x24 mm Sets
Material: Carbon Spring Steel Self Finish    Radius (R): 24.00 mm    Compensation angle: 2 °    Short Term Max Tensile Strngth: 10000 N    Long Term Max Tensile Strength: 5000 N   
Part Number: W0100-ALN-W-SET (10 Pcs)
Self Aligning Washers - 10x12x24 mm Sets - Carbon Spring Steel Self Finish Washer
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 08, 2025
$149.23 AUD
$179.07 AUD $149.23 AUD
Per 10
Quantity Required

Backorder: Out of Stock.
Nominal Inside Diameter (B)
10.00
mm
+ 0.20 / - 0.00
(Equiv. 0.394 in.)
Housing Pad Bore (d3)
12.00
mm

(Equiv. 0.472 in.)
OD (d2)
24.00
mm

(Equiv. 0.945 in.)
Ball socket (h1)
4.50
mm
Self Aligning Washers - 10x12x24 mm Sets
Material: Carbon Spring Steel Self Finish    Spherical Disk (h2): 5.50 mm    Overall Height (H): 7.50 mm    Radius (R): 24.00 mm    Compensation angle: 2 °    Short Term Max Tensile Strngth: 10000 N    Long Term Max Tensile Strength: 5000 N   
Part Number: W0100-ALN-W-SET (10 Pcs)
Self Aligning Washers - 10x12x24 mm Sets - Carbon Spring Steel Self Finish Washer
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 08, 2025
$149.23 AUD
$179.07 AUD $149.23 AUD
Per 10
Quantity Required

Backorder: Out of Stock.
Nominal Inside Diameter (B)
12.00
mm
+ 0.50 / - 0.00
(Equiv. 0.472 in.)
Housing Pad Bore (d3)
14.50
mm

(Equiv. 0.571 in.)
OD (d2)
30.00
mm

(Equiv. 1.181 in.)
Ball socket (h1)
5.00
mm
Spherical Disk (h2)
6.00
mm
Overall Height (H)
8.00
mm
Self Aligning Washers - 12x14.5x30 mm Sets
Material: Carbon Spring Steel Self Finish    Radius (R): 32.00 mm    Compensation angle: 2 °    Short Term Max Tensile Strngth: 12000 N    Long Term Max Tensile Strength: 6000 N   
Part Number: W0120-ALN-W-SET (10 Pcs)
Self Aligning Washers - 12x14.5x30 mm Sets - Carbon Spring Steel Self Finish Washer
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 08, 2025
$169.68 AUD
$203.62 AUD $169.68 AUD
Per 10
Quantity Required

Backorder: Out of Stock.
Nominal Inside Diameter (B)
12.00
mm
+ 0.50 / - 0.00
(Equiv. 0.472 in.)
Housing Pad Bore (d3)
14.50
mm

(Equiv. 0.571 in.)
OD (d2)
30.00
mm

(Equiv. 1.181 in.)
Ball socket (h1)
5.00
mm
Self Aligning Washers - 12x14.5x30 mm Sets
Material: Carbon Spring Steel Self Finish    Spherical Disk (h2): 6.00 mm    Overall Height (H): 8.00 mm    Radius (R): 32.00 mm    Compensation angle: 2 °    Short Term Max Tensile Strngth: 12000 N    Long Term Max Tensile Strength: 6000 N   
Part Number: W0120-ALN-W-SET (10 Pcs)
Self Aligning Washers - 12x14.5x30 mm Sets - Carbon Spring Steel Self Finish Washer
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 08, 2025
$169.68 AUD
$203.62 AUD $169.68 AUD
Per 10
Quantity Required

Backorder: Out of Stock.
Nominal Inside Diameter (B)
16.00
mm
+ 0.50 / - 0.00
(Equiv. 0.63 in.)
Housing Pad Bore (d3)
19.00
mm

(Equiv. 0.748 in.)
OD (d2)
36.00
mm

(Equiv. 1.417 in.)
Ball socket (h1)
5.50
mm
Spherical Disk (h2)
6.50
mm
Overall Height (H)
8.70
mm
Self Aligning Washers - 16x19x36 mm Sets
Material: Carbon Spring Steel Self Finish    Radius (R): 40.00 mm    Compensation angle: 2 °    Short Term Max Tensile Strngth: 17000 N    Long Term Max Tensile Strength: 8500 N   
Part Number: W0160-ALN-W-SET (10 Pcs)
Self Aligning Washers - 16x19x36 mm Sets - Carbon Spring Steel Self Finish Washer
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 08, 2025
$185.32 AUD
$222.38 AUD $185.32 AUD
Per 10
Quantity Required

Backorder: Out of Stock.
Nominal Inside Diameter (B)
16.00
mm
+ 0.50 / - 0.00
(Equiv. 0.63 in.)
Housing Pad Bore (d3)
19.00
mm

(Equiv. 0.748 in.)
OD (d2)
36.00
mm

(Equiv. 1.417 in.)
Ball socket (h1)
5.50
mm
Self Aligning Washers - 16x19x36 mm Sets
Material: Carbon Spring Steel Self Finish    Spherical Disk (h2): 6.50 mm    Overall Height (H): 8.70 mm    Radius (R): 40.00 mm    Compensation angle: 2 °    Short Term Max Tensile Strngth: 17000 N    Long Term Max Tensile Strength: 8500 N   
Part Number: W0160-ALN-W-SET (10 Pcs)
Self Aligning Washers - 16x19x36 mm Sets - Carbon Spring Steel Self Finish Washer
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 08, 2025
$185.32 AUD
$222.38 AUD $185.32 AUD
Per 10
Quantity Required

Backorder: Out of Stock.
Nominal Inside Diameter (B)
20.00
mm
+ 0.50 / - 0.00
(Equiv. 0.787 in.)
Housing Pad Bore (d3)
23.00
mm

(Equiv. 0.906 in.)
OD (d2)
44.00
mm

(Equiv. 1.732 in.)
Ball socket (h1)
6.00
mm
Spherical Disk (h2)
7.00
mm
Overall Height (H)
8.60
mm
Self Aligning Washers - 20x23x44 mm Sets
Material: Carbon Spring Steel Self Finish    Radius (R): 45.00 mm    Compensation angle: 2 °    Short Term Max Tensile Strngth: 22000 N    Long Term Max Tensile Strength: 11000 N   
Part Number: W0200-ALN-W-SET (10 Pcs)
Self Aligning Washers - 20x23x44 mm Sets - Carbon Spring Steel Self Finish Washer
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 08, 2025
$209.14 AUD
$250.96 AUD $209.14 AUD
Per 10
Quantity Required

Backorder: Out of Stock.
Nominal Inside Diameter (B)
20.00
mm
+ 0.50 / - 0.00
(Equiv. 0.787 in.)
Housing Pad Bore (d3)
23.00
mm

(Equiv. 0.906 in.)
OD (d2)
44.00
mm

(Equiv. 1.732 in.)
Ball socket (h1)
6.00
mm
Self Aligning Washers - 20x23x44 mm Sets
Material: Carbon Spring Steel Self Finish    Spherical Disk (h2): 7.00 mm    Overall Height (H): 8.60 mm    Radius (R): 45.00 mm    Compensation angle: 2 °    Short Term Max Tensile Strngth: 22000 N    Long Term Max Tensile Strength: 11000 N   
Part Number: W0200-ALN-W-SET (10 Pcs)
Self Aligning Washers - 20x23x44 mm Sets - Carbon Spring Steel Self Finish Washer
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 08, 2025
$209.14 AUD
$250.96 AUD $209.14 AUD
Per 10
Quantity Required

Backorder: Out of Stock.