Springs - Torsion - Right Hand Wound

Springs -> Torsion -> Right Hand Wound

There are 68 products in the sub-categories of Springs - Torsion - Right Hand Wound. Scroll down or follow the link to Springs - Torsion - Right Hand Wound in the products table to see all these items combined into a handy table with filters.

Category Details

A selection of Right Hand Wound Torsion Springs. Right hand winding springs are wound in a clockwise direction, and has its end of wire on the right side.

  • Mechanical spring that stores mechanical energy when it is twisted, and then releases this energy as torque (rotational force) when it unwinds.
  • It works by applying a rotational force or maintaining pressure between surfaces when its ends are twisted in opposite directions.
  • Load should be applied at about half the leg length. Free Deflection denotes the angle of the legs in the unloaded starting position. An expanded range may be available on special order. Please enquire.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Springs - Torsion - Right Hand Wound category on the Small Parts & Bearings online store.
Mandrel Size (MS) Length of Leg (E) Wire Diameter Spring Outside Diameter (D0) Minimum Axial Space Torque When Parallel Indicative
Image
Torsion Springs - 1.7x9.5x0.3 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Mandrel Size (MS)
1.70
mm

(Equiv. 0.067 in.)
Length of Leg (E)
9.5
mm

(Equiv. 0.374 in.)
Wire Diameter
0.30
mm

(Equiv. 0.012 in.)
Spring Outside Diameter (D0)
2.77
mm
Minimum Axial Space
2.18
mm
Torque When Parallel
5.3
N.mm
+/- 10 Perc.
Torsion Springs - 1.7x9.5x0.3 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 180 Deg.    Coils: 9   
Part Number: TS-017R-095-030-180-S2 (Each)
2 Available Now | Further orders can be expected around Wed, Mar 11, 2026
$15.14 AUD
$18.16 AUD $15.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Mandrel Size (MS) Length of Leg (E) Wire Diameter Spring Outside Diameter (D0) Indicative
Image
Torsion Springs - 1.7x9.5x0.3 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Mandrel Size (MS)
1.70
mm

(Equiv. 0.067 in.)
Length of Leg (E)
9.5
mm

(Equiv. 0.374 in.)
Wire Diameter
0.30
mm

(Equiv. 0.012 in.)
Spring Outside Diameter (D0)
2.77
mm
Torsion Springs - 1.7x9.5x0.3 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 2.18 mm    Torque When Parallel: 5.3 N.mm +/- 10 Perc.   Free Deflection: 180 Deg.    Coils: 9   
Part Number: TS-017R-095-030-180-S2 (Each)
2 Available Now | Further orders can be expected around Wed, Mar 11, 2026
$15.14 AUD
$18.16 AUD $15.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Torsion Springs - 2x20x0.3 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torque When Parallel
19.2
N.mm
Torsion Springs - 2x20x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 180 Deg.    Coils: 5   
Part Number: TS-020R-200-030-180-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 2x20x0.3 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torsion Springs - 2x20x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 19.2 N.mm    Free Deflection: 180 Deg.    Coils: 5   
Part Number: TS-020R-200-030-180-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 2x20x0.3 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torque When Parallel
19.2
N.mm
Torsion Springs - 2x20x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 135 Deg.    Coils: 5   
Part Number: TS-020R-200-030-135-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 2x20x0.3 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torsion Springs - 2x20x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 19.2 N.mm    Free Deflection: 135 Deg.    Coils: 5   
Part Number: TS-020R-200-030-135-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 2x20x0.3 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torque When Parallel
19.2
N.mm
Torsion Springs - 2x20x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 90 Deg.    Coils: 5   
Part Number: TS-020R-200-030-090-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 2x20x0.3 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torsion Springs - 2x20x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 19.2 N.mm    Free Deflection: 90 Deg.    Coils: 5   
Part Number: TS-020R-200-030-090-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 2x20x0.4 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torque When Parallel
57.6
N.mm
Torsion Springs - 2x20x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 90 Deg.    Coils: 5   
Part Number: TS-020R-200-040-090-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 2x20x0.4 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torsion Springs - 2x20x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 57.6 N.mm    Free Deflection: 90 Deg.    Coils: 5   
Part Number: TS-020R-200-040-090-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 2x20x0.4 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torque When Parallel
57.6
N.mm
Torsion Springs - 2x20x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 135 Deg.    Coils: 5   
Part Number: TS-020R-200-040-135-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 2x20x0.4 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torsion Springs - 2x20x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 57.6 N.mm    Free Deflection: 135 Deg.    Coils: 5   
Part Number: TS-020R-200-040-135-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 2x20x0.4 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torque When Parallel
57.6
N.mm
Torsion Springs - 2x20x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 180 Deg.    Coils: 5   
Part Number: TS-020R-200-040-180-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 2x20x0.4 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torsion Springs - 2x20x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 57.6 N.mm    Free Deflection: 180 Deg.    Coils: 5   
Part Number: TS-020R-200-040-180-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 2.36x12.7x0.43 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Mandrel Size (MS)
2.36
mm

(Equiv. 0.093 in.)
Length of Leg (E)
12.7
mm

(Equiv. 0.5 in.)
Wire Diameter
0.43
mm

(Equiv. 0.017 in.)
Spring Outside Diameter (D0)
4.06
mm
Minimum Axial Space
2.06
mm
Torque When Parallel
13.2
N.mm
+/- 10 Perc.
Torsion Springs - 2.36x12.7x0.43 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 90 Deg.    Coils: 3.25   
Part Number: TS-024R-127-043-090-S2 (Each)
2 Available Now | Further orders can be expected around Wed, Mar 11, 2026
$14.05 AUD
$16.85 AUD $14.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Larger quantities than the 2 available can be backordered.
Torsion Springs - 2.36x12.7x0.43 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Mandrel Size (MS)
2.36
mm

(Equiv. 0.093 in.)
Length of Leg (E)
12.7
mm

(Equiv. 0.5 in.)
Wire Diameter
0.43
mm

(Equiv. 0.017 in.)
Spring Outside Diameter (D0)
4.06
mm
Torsion Springs - 2.36x12.7x0.43 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 2.06 mm    Torque When Parallel: 13.2 N.mm +/- 10 Perc.   Free Deflection: 90 Deg.    Coils: 3.25   
Part Number: TS-024R-127-043-090-S2 (Each)
2 Available Now | Further orders can be expected around Wed, Mar 11, 2026
$14.05 AUD
$16.85 AUD $14.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. Backorder if more than 2.
Torsion Springs - 2.77x12.7x0.3 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Mandrel Size (MS)
2.77
mm

(Equiv. 0.109 in.)
Length of Leg (E)
12.7
mm

(Equiv. 0.5 in.)
Wire Diameter
0.30
mm

(Equiv. 0.012 in.)
Spring Outside Diameter (D0)
4.22
mm
Minimum Axial Space
1.50
mm
Torque When Parallel
5.3
N.mm
+/- 10 Perc.
Torsion Springs - 2.77x12.7x0.3 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 180 Deg.    Coils: 3   
Part Number: TS-028R-127-030-180-S2 (Each)
Out of Stock | Backorder Now | Orders can be expected around Wed, Mar 11, 2026
$18.05 AUD
$21.65 AUD $18.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 2.77x12.7x0.3 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Mandrel Size (MS)
2.77
mm

(Equiv. 0.109 in.)
Length of Leg (E)
12.7
mm

(Equiv. 0.5 in.)
Wire Diameter
0.30
mm

(Equiv. 0.012 in.)
Spring Outside Diameter (D0)
4.22
mm
Torsion Springs - 2.77x12.7x0.3 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 1.50 mm    Torque When Parallel: 5.3 N.mm +/- 10 Perc.   Free Deflection: 180 Deg.    Coils: 3   
Part Number: TS-028R-127-030-180-S2 (Each)
Out of Stock | Backorder Now | Orders can be expected around Wed, Mar 11, 2026
$18.05 AUD
$21.65 AUD $18.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 2.77x19.1x0.51 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Mandrel Size (MS)
2.77
mm

(Equiv. 0.109 in.)
Length of Leg (E)
19.1
mm

(Equiv. 0.752 in.)
Wire Diameter
0.51
mm

(Equiv. 0.02 in.)
Spring Outside Diameter (D0)
4.55
mm
Minimum Axial Space
4.32
mm
Torque When Parallel
21.1
N.mm
+/- 10 Perc.
Torsion Springs - 2.77x19.1x0.51 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 180 Deg.    Coils: 8   
Part Number: TS-028R-191-051-180-S2 (Each)
Out of Stock | Backorder Now | Orders can be expected around Wed, Mar 11, 2026
$12.41 AUD
$14.89 AUD $12.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 2.77x19.1x0.51 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Mandrel Size (MS)
2.77
mm

(Equiv. 0.109 in.)
Length of Leg (E)
19.1
mm

(Equiv. 0.752 in.)
Wire Diameter
0.51
mm

(Equiv. 0.02 in.)
Spring Outside Diameter (D0)
4.55
mm
Torsion Springs - 2.77x19.1x0.51 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 4.32 mm    Torque When Parallel: 21.1 N.mm +/- 10 Perc.   Free Deflection: 180 Deg.    Coils: 8   
Part Number: TS-028R-191-051-180-S2 (Each)
Out of Stock | Backorder Now | Orders can be expected around Wed, Mar 11, 2026
$12.41 AUD
$14.89 AUD $12.41 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.3 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torque When Parallel
19.2
N.mm
Torsion Springs - 3x30x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 180 Deg.    Coils: 3   
Part Number: TS-030R-300-030-180-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.3 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torsion Springs - 3x30x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 19.2 N.mm    Free Deflection: 180 Deg.    Coils: 3   
Part Number: TS-030R-300-030-180-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.3 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torque When Parallel
19.2
N.mm
Torsion Springs - 3x30x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 135 Deg.    Coils: 3   
Part Number: TS-030R-300-030-135-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.3 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torsion Springs - 3x30x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 19.2 N.mm    Free Deflection: 135 Deg.    Coils: 3   
Part Number: TS-030R-300-030-135-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.3 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torque When Parallel
19.2
N.mm
Torsion Springs - 3x30x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 90 Deg.    Coils: 3   
Part Number: TS-030R-300-030-090-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.3 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torsion Springs - 3x30x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 19.2 N.mm    Free Deflection: 90 Deg.    Coils: 3   
Part Number: TS-030R-300-030-090-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.4 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torque When Parallel
57.6
N.mm
Torsion Springs - 3x30x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 135 Deg.    Coils: 3   
Part Number: TS-030R-300-040-135-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.4 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torsion Springs - 3x30x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 57.6 N.mm    Free Deflection: 135 Deg.    Coils: 3   
Part Number: TS-030R-300-040-135-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.4 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torque When Parallel
57.6
N.mm
Torsion Springs - 3x30x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 90 Deg.    Coils: 3   
Part Number: TS-030R-300-040-090-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.4 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torsion Springs - 3x30x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 57.6 N.mm    Free Deflection: 90 Deg.    Coils: 3   
Part Number: TS-030R-300-040-090-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.4 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torque When Parallel
64.0
N.mm
Torsion Springs - 3x30x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 180 Deg.    Coils: 3   
Part Number: TS-030R-300-040-180-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.4 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torsion Springs - 3x30x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 64.0 N.mm    Free Deflection: 180 Deg.    Coils: 3   
Part Number: TS-030R-300-040-180-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.5 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.500
mm

(Equiv. 0.02 in.)
Torque When Parallel
115.2
N.mm
Torsion Springs - 3x30x0.5 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 180 Deg.    Coils: 4   
Part Number: TS-030R-300-050-180-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.5 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.500
mm

(Equiv. 0.02 in.)
Torsion Springs - 3x30x0.5 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 115.2 N.mm    Free Deflection: 180 Deg.    Coils: 4   
Part Number: TS-030R-300-050-180-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.5 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.500
mm

(Equiv. 0.02 in.)
Torque When Parallel
115.2
N.mm
Torsion Springs - 3x30x0.5 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 135 Deg.    Coils: 4   
Part Number: TS-030R-300-050-135-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.5 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.500
mm

(Equiv. 0.02 in.)
Torsion Springs - 3x30x0.5 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 115.2 N.mm    Free Deflection: 135 Deg.    Coils: 4   
Part Number: TS-030R-300-050-135-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.5 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.500
mm

(Equiv. 0.02 in.)
Torque When Parallel
115.2
N.mm
Torsion Springs - 3x30x0.5 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 90 Deg.    Coils: 4   
Part Number: TS-030R-300-050-090-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3x30x0.5 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.500
mm

(Equiv. 0.02 in.)
Torsion Springs - 3x30x0.5 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 115.2 N.mm    Free Deflection: 90 Deg.    Coils: 4   
Part Number: TS-030R-300-050-090-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3.56x19.1x0.64 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Mandrel Size (MS)
3.56
mm

(Equiv. 0.14 in.)
Length of Leg (E)
19.1
mm

(Equiv. 0.752 in.)
Wire Diameter
0.64
mm

(Equiv. 0.025 in.)
Spring Outside Diameter (D0)
5.97
mm
Minimum Axial Space
2.44
mm
Torque When Parallel
42.4
N.mm
+/- 10 Perc.
Torsion Springs - 3.56x19.1x0.64 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 90 Deg.    Coils: 2.25   
Part Number: TS-036R-191-064-090-S2 (Each)
Out of Stock | Backorder Now | Orders can be expected around Wed, Mar 11, 2026
$16.68 AUD
$20.02 AUD $16.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3.56x19.1x0.64 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Mandrel Size (MS)
3.56
mm

(Equiv. 0.14 in.)
Length of Leg (E)
19.1
mm

(Equiv. 0.752 in.)
Wire Diameter
0.64
mm

(Equiv. 0.025 in.)
Spring Outside Diameter (D0)
5.97
mm
Torsion Springs - 3.56x19.1x0.64 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 2.44 mm    Torque When Parallel: 42.4 N.mm +/- 10 Perc.   Free Deflection: 90 Deg.    Coils: 2.25   
Part Number: TS-036R-191-064-090-S2 (Each)
Out of Stock | Backorder Now | Orders can be expected around Wed, Mar 11, 2026
$16.68 AUD
$20.02 AUD $16.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3.56x25.4x0.71 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Mandrel Size (MS)
3.56
mm

(Equiv. 0.14 in.)
Length of Leg (E)
25.4
mm

(Equiv. 1 in.)
Wire Diameter
0.71
mm

(Equiv. 0.028 in.)
Spring Outside Diameter (D0)
6.325
mm
Minimum Axial Space
6.045
mm
Torque When Parallel
57.6
N.mm
Torsion Springs - 3.56x25.4x0.71 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 180 Deg.    Coils: 6   
Part Number: TS-036R-254-071-180-S2 (Each)
Out of Stock | Backorder Now | Orders can be expected around Wed, Mar 11, 2026
$16.59 AUD
$19.91 AUD $16.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3.56x25.4x0.71 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Mandrel Size (MS)
3.56
mm

(Equiv. 0.14 in.)
Length of Leg (E)
25.4
mm

(Equiv. 1 in.)
Wire Diameter
0.71
mm

(Equiv. 0.028 in.)
Spring Outside Diameter (D0)
6.325
mm
Torsion Springs - 3.56x25.4x0.71 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 6.045 mm    Torque When Parallel: 57.6 N.mm    Free Deflection: 180 Deg.    Coils: 6   
Part Number: TS-036R-254-071-180-S2 (Each)
Out of Stock | Backorder Now | Orders can be expected around Wed, Mar 11, 2026
$16.59 AUD
$19.91 AUD $16.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3.96x19.1x0.43 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Mandrel Size (MS)
3.96
mm

(Equiv. 0.156 in.)
Length of Leg (E)
19.1
mm

(Equiv. 0.752 in.)
Wire Diameter
0.43
mm

(Equiv. 0.017 in.)
Spring Outside Diameter (D0)
6.58
mm
Minimum Axial Space
3.13
mm
Torque When Parallel
13.2
N.mm
+/- 10 Perc.
Torsion Springs - 3.96x19.1x0.43 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 270 Deg.   
Part Number: TS-040R-191-043-270-S2 (PK-50)
Out of Stock | Backorder Now | Orders can be expected around Mon, Feb 23, 2026
$1,767.41 AUD
$2,120.89 AUD $1,767.41 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 3.96x19.1x0.43 mm Right Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Mandrel Size (MS)
3.96
mm

(Equiv. 0.156 in.)
Length of Leg (E)
19.1
mm

(Equiv. 0.752 in.)
Wire Diameter
0.43
mm

(Equiv. 0.017 in.)
Spring Outside Diameter (D0)
6.58
mm
Torsion Springs - 3.96x19.1x0.43 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 3.13 mm    Torque When Parallel: 13.2 N.mm +/- 10 Perc.   Free Deflection: 270 Deg.   
Part Number: TS-040R-191-043-270-S2 (PK-50)
Out of Stock | Backorder Now | Orders can be expected around Mon, Feb 23, 2026
$1,767.41 AUD
$2,120.89 AUD $1,767.41 AUD
Priced, Stocked and Sold Per 50 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 4x40x0.4 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
4
mm

(Equiv. 0.157 in.)
Length of Leg (E)
40
mm

(Equiv. 1.575 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torque When Parallel
44.8
N.mm
Torsion Springs - 4x40x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 180 Deg.    Coils: 3   
Part Number: TS-040R-400-040-180-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 4x40x0.4 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
4
mm

(Equiv. 0.157 in.)
Length of Leg (E)
40
mm

(Equiv. 1.575 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torsion Springs - 4x40x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 44.8 N.mm    Free Deflection: 180 Deg.    Coils: 3   
Part Number: TS-040R-400-040-180-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 4x40x0.4 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
4
mm

(Equiv. 0.157 in.)
Length of Leg (E)
40
mm

(Equiv. 1.575 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torque When Parallel
44.8
N.mm
Torsion Springs - 4x40x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 90 Deg.    Coils: 3   
Part Number: TS-040R-400-040-090-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Torsion Springs - 4x40x0.4 mm Right Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Mandrel Size (MS)
4
mm

(Equiv. 0.157 in.)
Length of Leg (E)
40
mm

(Equiv. 1.575 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torsion Springs - 4x40x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 44.8 N.mm    Free Deflection: 90 Deg.    Coils: 3   
Part Number: TS-040R-400-040-090-S4 (PK-5)
Out of Stock | Backorder Now | Orders can be expected around Mon, Mar 09, 2026
$6.41 AUD
$7.69 AUD $6.41 AUD
Priced, Stocked and Sold Per 5 Units
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.