Springs - Torsion - Left Hand Wound

Springs -> Torsion -> Left Hand Wound

There are 74 products in the sub-categories of Springs - Torsion - Left Hand Wound. Scroll down or follow the link to Springs - Torsion - Left Hand Wound in the products table to see all these items combined into a handy table with filters.

Category Details

A selection of Left Hand Wound Torsion Springs. Left hand winding spring are wound in an anti-clockwise direction, and has its end of wire on the left side.

  • Mechanical spring that stores mechanical energy when it is twisted, and then releases this energy as torque (rotational force) when it unwinds.
  • It works by applying a rotational force or maintaining pressure between surfaces when its ends are twisted in opposite directions.
  • Load should be applied at about half the leg length. Free Deflection denotes the angle of the legs in the unloaded starting position. An expanded range may be available on special order. Please enquire.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Springs - Torsion - Left Hand Wound category on the Small Parts & Bearings online store.
Mandrel Size (MS) Length of Leg (E) Wire Diameter Spring Outside Diameter (D0) Minimum Axial Space Torque When Parallel Indicative
Image
Mandrel Size (MS)
1.70
mm

(Equiv. 0.067 in.)
Length of Leg (E)
9.5
mm

(Equiv. 0.374 in.)
Wire Diameter
0.30
mm

(Equiv. 0.012 in.)
Spring Outside Diameter (D0)
2.77
mm
Minimum Axial Space
2.18
mm
Torque When Parallel
5.3
N.mm
+/- 10 Perc.
Torsion Springs - 1.7x9.5x0.3 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 180 Deg.    Coils: 5   
Part Number: TS-017L-095-030-180-S2
Torsion Springs - 1.7x9.5x0.3 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
2 Available Now | Further orders can be expected around Thu, Oct 09, 2025
$15.14 AUD
$18.16 AUD $15.14 AUD
Each
Quantity Required

2 Available Now. Backorder if more than 2.
Mandrel Size (MS) Length of Leg (E) Wire Diameter Spring Outside Diameter (D0) Indicative
Image
Mandrel Size (MS)
1.70
mm

(Equiv. 0.067 in.)
Length of Leg (E)
9.5
mm

(Equiv. 0.374 in.)
Wire Diameter
0.30
mm

(Equiv. 0.012 in.)
Spring Outside Diameter (D0)
2.77
mm
Torsion Springs - 1.7x9.5x0.3 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 2.18 mm    Torque When Parallel: 5.3 N.mm +/- 10 Perc.   Free Deflection: 180 Deg.    Coils: 5   
Part Number: TS-017L-095-030-180-S2
Torsion Springs - 1.7x9.5x0.3 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
2 Available Now | Further orders can be expected around Thu, Oct 09, 2025
$15.14 AUD
$18.16 AUD $15.14 AUD
Each
Quantity Required

2 Available Now. Backorder if more than 2.
Mandrel Size (MS)
1.70
mm

(Equiv. 0.067 in.)
Length of Leg (E)
9.5
mm

(Equiv. 0.374 in.)
Wire Diameter
0.31
mm

(Equiv. 0.012 in.)
Spring Outside Diameter (D0)
2.769
mm
Minimum Axial Space
2.184
mm
Torque When Parallel
6.4
N.mm
Torsion Springs - 1.7x9.5x0.31 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 180 Deg.   
Part Number: TS-017L-095-031-180-S2 (50 Pcs)
Torsion Springs - 1.7x9.5x0.31 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 23, 2025
$1,787.05 AUD
$2,144.45 AUD $1,787.05 AUD
Per 50
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
1.70
mm

(Equiv. 0.067 in.)
Length of Leg (E)
9.5
mm

(Equiv. 0.374 in.)
Wire Diameter
0.31
mm

(Equiv. 0.012 in.)
Spring Outside Diameter (D0)
2.769
mm
Torsion Springs - 1.7x9.5x0.31 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 2.184 mm    Torque When Parallel: 6.4 N.mm    Free Deflection: 180 Deg.   
Part Number: TS-017L-095-031-180-S2 (50 Pcs)
Torsion Springs - 1.7x9.5x0.31 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 23, 2025
$1,787.05 AUD
$2,144.45 AUD $1,787.05 AUD
Per 50
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torque When Parallel
19.2
N.mm
Torsion Springs - 2x20x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 90 Deg.    Coils: 5   
Part Number: TS-020L-200-030-090-S4 (100 Pcs)
Torsion Springs - 2x20x0.3 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torsion Springs - 2x20x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 19.2 N.mm    Free Deflection: 90 Deg.    Coils: 5   
Part Number: TS-020L-200-030-090-S4 (100 Pcs)
Torsion Springs - 2x20x0.3 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torque When Parallel
19.2
N.mm
Torsion Springs - 2x20x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 180 Deg.    Coils: 5   
Part Number: TS-020L-200-030-180-S4 (100 Pcs)
Torsion Springs - 2x20x0.3 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torsion Springs - 2x20x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 19.2 N.mm    Free Deflection: 180 Deg.    Coils: 5   
Part Number: TS-020L-200-030-180-S4 (100 Pcs)
Torsion Springs - 2x20x0.3 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torque When Parallel
19.2
N.mm
Torsion Springs - 2x20x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 135 Deg.    Coils: 5   
Part Number: TS-020L-200-030-135-S4 (100 Pcs)
Torsion Springs - 2x20x0.3 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torsion Springs - 2x20x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 19.2 N.mm    Free Deflection: 135 Deg.    Coils: 5   
Part Number: TS-020L-200-030-135-S4 (100 Pcs)
Torsion Springs - 2x20x0.3 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torque When Parallel
57.6
N.mm
Torsion Springs - 2x20x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 180 Deg.    Coils: 5   
Part Number: TS-020L-200-040-180-S4 (100 Pcs)
Torsion Springs - 2x20x0.4 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torsion Springs - 2x20x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 57.6 N.mm    Free Deflection: 180 Deg.    Coils: 5   
Part Number: TS-020L-200-040-180-S4 (100 Pcs)
Torsion Springs - 2x20x0.4 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torque When Parallel
57.6
N.mm
Torsion Springs - 2x20x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 135 Deg.    Coils: 5   
Part Number: TS-020L-200-040-135-S4 (100 Pcs)
Torsion Springs - 2x20x0.4 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torsion Springs - 2x20x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 57.6 N.mm    Free Deflection: 135 Deg.    Coils: 5   
Part Number: TS-020L-200-040-135-S4 (100 Pcs)
Torsion Springs - 2x20x0.4 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torque When Parallel
57.6
N.mm
Torsion Springs - 2x20x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 90 Deg.    Coils: 5   
Part Number: TS-020L-200-040-090-S4 (100 Pcs)
Torsion Springs - 2x20x0.4 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
2
mm

(Equiv. 0.079 in.)
Length of Leg (E)
20
mm

(Equiv. 0.787 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torsion Springs - 2x20x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 57.6 N.mm    Free Deflection: 90 Deg.    Coils: 5   
Part Number: TS-020L-200-040-090-S4 (100 Pcs)
Torsion Springs - 2x20x0.4 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
2.36
mm

(Equiv. 0.093 in.)
Length of Leg (E)
12.7
mm

(Equiv. 0.5 in.)
Wire Diameter
0.43
mm

(Equiv. 0.017 in.)
Spring Outside Diameter (D0)
4.06
mm
Minimum Axial Space
2.06
mm
Torque When Parallel
13.2
N.mm
+/- 10 Perc.
Torsion Springs - 2.36x12.7x0.43 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 90 Deg.    Coils: 2.25   
Part Number: TS-024L-127-043-090-S2
Torsion Springs - 2.36x12.7x0.43 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
2 Available Now | Further orders can be expected around Thu, Oct 09, 2025
$14.05 AUD
$16.85 AUD $14.05 AUD
Each
Quantity Required

2 Available Now. Backorder if more than 2.
Mandrel Size (MS)
2.36
mm

(Equiv. 0.093 in.)
Length of Leg (E)
12.7
mm

(Equiv. 0.5 in.)
Wire Diameter
0.43
mm

(Equiv. 0.017 in.)
Spring Outside Diameter (D0)
4.06
mm
Torsion Springs - 2.36x12.7x0.43 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 2.06 mm    Torque When Parallel: 13.2 N.mm +/- 10 Perc.   Free Deflection: 90 Deg.    Coils: 2.25   
Part Number: TS-024L-127-043-090-S2
Torsion Springs - 2.36x12.7x0.43 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
2 Available Now | Further orders can be expected around Thu, Oct 09, 2025
$14.05 AUD
$16.85 AUD $14.05 AUD
Each
Quantity Required

2 Available Now. Backorder if more than 2.
Mandrel Size (MS)
2.77
mm

(Equiv. 0.109 in.)
Length of Leg (E)
19.1
mm

(Equiv. 0.752 in.)
Wire Diameter
0.38
mm

(Equiv. 0.015 in.)
Spring Outside Diameter (D0)
4.65
mm
Minimum Axial Space
1.91
mm
Torque When Parallel
11.0
N.mm
+/- 10 Perc.
Torsion Springs - 2.77x19.1x0.38 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 180 Deg.    Coils: 3   
Part Number: TS-028L-191-038-180-S2
Torsion Springs - 2.77x19.1x0.38 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 09, 2025
$19.59 AUD
$23.51 AUD $19.59 AUD
Each
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
2.77
mm

(Equiv. 0.109 in.)
Length of Leg (E)
19.1
mm

(Equiv. 0.752 in.)
Wire Diameter
0.38
mm

(Equiv. 0.015 in.)
Spring Outside Diameter (D0)
4.65
mm
Torsion Springs - 2.77x19.1x0.38 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 1.91 mm    Torque When Parallel: 11.0 N.mm +/- 10 Perc.   Free Deflection: 180 Deg.    Coils: 3   
Part Number: TS-028L-191-038-180-S2
Torsion Springs - 2.77x19.1x0.38 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 09, 2025
$19.59 AUD
$23.51 AUD $19.59 AUD
Each
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
2.77
mm

(Equiv. 0.109 in.)
Length of Leg (E)
19.1
mm

(Equiv. 0.752 in.)
Wire Diameter
0.51
mm

(Equiv. 0.02 in.)
Spring Outside Diameter (D0)
4.55
mm
Minimum Axial Space
4.32
mm
Torque When Parallel
21.1
N.mm
+/- 10 Perc.
Torsion Springs - 2.77x19.1x0.51 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 180 Deg.    Coils: 8   
Part Number: TS-028L-191-051-180-S2
Torsion Springs - 2.77x19.1x0.51 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 09, 2025
$13.32 AUD
$15.98 AUD $13.32 AUD
Each
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
2.77
mm

(Equiv. 0.109 in.)
Length of Leg (E)
19.1
mm

(Equiv. 0.752 in.)
Wire Diameter
0.51
mm

(Equiv. 0.02 in.)
Spring Outside Diameter (D0)
4.55
mm
Torsion Springs - 2.77x19.1x0.51 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 4.32 mm    Torque When Parallel: 21.1 N.mm +/- 10 Perc.   Free Deflection: 180 Deg.    Coils: 8   
Part Number: TS-028L-191-051-180-S2
Torsion Springs - 2.77x19.1x0.51 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 09, 2025
$13.32 AUD
$15.98 AUD $13.32 AUD
Each
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torque When Parallel
19.2
N.mm
Torsion Springs - 3x30x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 180 Deg.    Coils: 3   
Part Number: TS-030L-300-030-180-S4 (100 Pcs)
Torsion Springs - 3x30x0.3 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torsion Springs - 3x30x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 19.2 N.mm    Free Deflection: 180 Deg.    Coils: 3   
Part Number: TS-030L-300-030-180-S4 (100 Pcs)
Torsion Springs - 3x30x0.3 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torque When Parallel
19.2
N.mm
Torsion Springs - 3x30x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 135 Deg.    Coils: 3   
Part Number: TS-030L-300-030-135-S4 (100 Pcs)
Torsion Springs - 3x30x0.3 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torsion Springs - 3x30x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 19.2 N.mm    Free Deflection: 135 Deg.    Coils: 3   
Part Number: TS-030L-300-030-135-S4 (100 Pcs)
Torsion Springs - 3x30x0.3 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torque When Parallel
19.2
N.mm
Torsion Springs - 3x30x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 90 Deg.    Coils: 3   
Part Number: TS-030L-300-030-090-S4 (100 Pcs)
Torsion Springs - 3x30x0.3 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.300
mm

(Equiv. 0.012 in.)
Torsion Springs - 3x30x0.3 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 19.2 N.mm    Free Deflection: 90 Deg.    Coils: 3   
Part Number: TS-030L-300-030-090-S4 (100 Pcs)
Torsion Springs - 3x30x0.3 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torque When Parallel
57.6
N.mm
Torsion Springs - 3x30x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 90 Deg.    Coils: 3   
Part Number: TS-030L-300-040-090-S4 (100 Pcs)
Torsion Springs - 3x30x0.4 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torsion Springs - 3x30x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 57.6 N.mm    Free Deflection: 90 Deg.    Coils: 3   
Part Number: TS-030L-300-040-090-S4 (100 Pcs)
Torsion Springs - 3x30x0.4 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torque When Parallel
57.6
N.mm
Torsion Springs - 3x30x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 135 Deg.    Coils: 3   
Part Number: TS-030L-300-040-135-S4 (100 Pcs)
Torsion Springs - 3x30x0.4 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torsion Springs - 3x30x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 57.6 N.mm    Free Deflection: 135 Deg.    Coils: 3   
Part Number: TS-030L-300-040-135-S4 (100 Pcs)
Torsion Springs - 3x30x0.4 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torque When Parallel
64.0
N.mm
Torsion Springs - 3x30x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 180 Deg.    Coils: 3   
Part Number: TS-030L-300-040-180-S4 (100 Pcs)
Torsion Springs - 3x30x0.4 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.400
mm

(Equiv. 0.016 in.)
Torsion Springs - 3x30x0.4 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 64.0 N.mm    Free Deflection: 180 Deg.    Coils: 3   
Part Number: TS-030L-300-040-180-S4 (100 Pcs)
Torsion Springs - 3x30x0.4 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.500
mm

(Equiv. 0.02 in.)
Torque When Parallel
115.2
N.mm
Torsion Springs - 3x30x0.5 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 180 Deg.    Coils: 4   
Part Number: TS-030L-300-050-180-S4 (100 Pcs)
Torsion Springs - 3x30x0.5 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.500
mm

(Equiv. 0.02 in.)
Torsion Springs - 3x30x0.5 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 115.2 N.mm    Free Deflection: 180 Deg.    Coils: 4   
Part Number: TS-030L-300-050-180-S4 (100 Pcs)
Torsion Springs - 3x30x0.5 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.500
mm

(Equiv. 0.02 in.)
Torque When Parallel
115.2
N.mm
Torsion Springs - 3x30x0.5 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 135 Deg.    Coils: 4   
Part Number: TS-030L-300-050-135-S4 (100 Pcs)
Torsion Springs - 3x30x0.5 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.500
mm

(Equiv. 0.02 in.)
Torsion Springs - 3x30x0.5 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 115.2 N.mm    Free Deflection: 135 Deg.    Coils: 4   
Part Number: TS-030L-300-050-135-S4 (100 Pcs)
Torsion Springs - 3x30x0.5 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.500
mm

(Equiv. 0.02 in.)
Torque When Parallel
115.2
N.mm
Torsion Springs - 3x30x0.5 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Free Deflection: 90 Deg.    Coils: 4   
Part Number: TS-030L-300-050-090-S4 (100 Pcs)
Torsion Springs - 3x30x0.5 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3
mm

(Equiv. 0.118 in.)
Length of Leg (E)
30
mm

(Equiv. 1.181 in.)
Wire Diameter
0.500
mm

(Equiv. 0.02 in.)
Torsion Springs - 3x30x0.5 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Torque When Parallel: 115.2 N.mm    Free Deflection: 90 Deg.    Coils: 4   
Part Number: TS-030L-300-050-090-S4 (100 Pcs)
Torsion Springs - 3x30x0.5 mm Left Hand Wound - Stainless Steel 304 Similar to A2, 18-8 HRB80 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Oct 07, 2025
$133.32 AUD
$159.98 AUD $133.32 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3.56
mm

(Equiv. 0.14 in.)
Length of Leg (E)
19.1
mm

(Equiv. 0.752 in.)
Wire Diameter
0.46
mm

(Equiv. 0.018 in.)
Spring Outside Diameter (D0)
5.49
mm
Minimum Axial Space
2.77
mm
Torque When Parallel
16.0
N.mm
+/- 10 Perc.
Torsion Springs - 3.56x19.1x0.46 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 180 Deg.    Coils: 4   
Part Number: TS-036L-191-046-180-S2
Torsion Springs - 3.56x19.1x0.46 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 09, 2025
$20.14 AUD
$24.16 AUD $20.14 AUD
Each
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3.56
mm

(Equiv. 0.14 in.)
Length of Leg (E)
19.1
mm

(Equiv. 0.752 in.)
Wire Diameter
0.46
mm

(Equiv. 0.018 in.)
Spring Outside Diameter (D0)
5.49
mm
Torsion Springs - 3.56x19.1x0.46 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 2.77 mm    Torque When Parallel: 16.0 N.mm +/- 10 Perc.   Free Deflection: 180 Deg.    Coils: 4   
Part Number: TS-036L-191-046-180-S2
Torsion Springs - 3.56x19.1x0.46 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 09, 2025
$20.14 AUD
$24.16 AUD $20.14 AUD
Each
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3.56
mm

(Equiv. 0.14 in.)
Length of Leg (E)
19.1
mm

(Equiv. 0.752 in.)
Wire Diameter
0.64
mm

(Equiv. 0.025 in.)
Spring Outside Diameter (D0)
5.969
mm
Minimum Axial Space
2.438
mm
Torque When Parallel
44.8
N.mm
Torsion Springs - 3.56x19.1x0.64 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 90 Deg.   
Part Number: TS-036L-191-064-090-S2
Torsion Springs - 3.56x19.1x0.64 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 23, 2025
$37.59 AUD
$45.11 AUD $37.59 AUD
Each
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3.56
mm

(Equiv. 0.14 in.)
Length of Leg (E)
19.1
mm

(Equiv. 0.752 in.)
Wire Diameter
0.64
mm

(Equiv. 0.025 in.)
Spring Outside Diameter (D0)
5.969
mm
Torsion Springs - 3.56x19.1x0.64 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 2.438 mm    Torque When Parallel: 44.8 N.mm    Free Deflection: 90 Deg.   
Part Number: TS-036L-191-064-090-S2
Torsion Springs - 3.56x19.1x0.64 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 23, 2025
$37.59 AUD
$45.11 AUD $37.59 AUD
Each
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3.56
mm

(Equiv. 0.14 in.)
Length of Leg (E)
25.4
mm

(Equiv. 1 in.)
Wire Diameter
0.71
mm

(Equiv. 0.028 in.)
Spring Outside Diameter (D0)
6.325
mm
Minimum Axial Space
6.045
mm
Torque When Parallel
57.6
N.mm
Torsion Springs - 3.56x25.4x0.71 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 180 Deg.   
Part Number: TS-036L-254-071-180-S2 (50 Pcs)
Torsion Springs - 3.56x25.4x0.71 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 23, 2025
$3,106.95 AUD
$3,106.95 AUD
Per 50
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3.56
mm

(Equiv. 0.14 in.)
Length of Leg (E)
25.4
mm

(Equiv. 1 in.)
Wire Diameter
0.71
mm

(Equiv. 0.028 in.)
Spring Outside Diameter (D0)
6.325
mm
Torsion Springs - 3.56x25.4x0.71 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 6.045 mm    Torque When Parallel: 57.6 N.mm    Free Deflection: 180 Deg.   
Part Number: TS-036L-254-071-180-S2 (50 Pcs)
Torsion Springs - 3.56x25.4x0.71 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 23, 2025
$3,106.95 AUD
$3,106.95 AUD
Per 50
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3.96
mm

(Equiv. 0.156 in.)
Length of Leg (E)
19.1
mm

(Equiv. 0.752 in.)
Wire Diameter
0.43
mm

(Equiv. 0.017 in.)
Spring Outside Diameter (D0)
6.58
mm
Minimum Axial Space
3.13
mm
Torque When Parallel
13.2
N.mm
+/- 10 Perc.
Torsion Springs - 3.96x19.1x0.43 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Free Deflection: 270 Deg.   
Part Number: TS-040L-191-043-270-S2 (50 Pcs)
Torsion Springs - 3.96x19.1x0.43 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 23, 2025
$1,767.41 AUD
$2,120.89 AUD $1,767.41 AUD
Per 50
Quantity Required

Backorder: Out of Stock.
Mandrel Size (MS)
3.96
mm

(Equiv. 0.156 in.)
Length of Leg (E)
19.1
mm

(Equiv. 0.752 in.)
Wire Diameter
0.43
mm

(Equiv. 0.017 in.)
Spring Outside Diameter (D0)
6.58
mm
Torsion Springs - 3.96x19.1x0.43 mm - Stainless Steel 302/304 Similar to A2, 18-8
Material: Stainless Steel 302/304 (Similar to A2, 18-8)    Minimum Axial Space: 3.13 mm    Torque When Parallel: 13.2 N.mm +/- 10 Perc.   Free Deflection: 270 Deg.   
Part Number: TS-040L-191-043-270-S2 (50 Pcs)
Torsion Springs - 3.96x19.1x0.43 mm Left Hand Wound - Stainless Steel 302/304 Similar to A2, 18-8 Spring
Out of Stock | Backorder Now | Orders can be expected around Tue, Sep 23, 2025
$1,767.41 AUD
$2,120.89 AUD $1,767.41 AUD
Per 50
Quantity Required

Backorder: Out of Stock.