Shafting - Pre Drilled and Tapped - Stainless Steel

Shafting -> Pre Drilled and Tapped -> Stainless Steel

There are 8 products in the sub-categories of Shafting - Pre Drilled and Tapped - Stainless Steel. Browse the Shafting - Pre Drilled and Tapped - Stainless Steel products table.

Category Details

A selection of Stainless Steel Pre Drilled and Tapped Shafting. For use with rail supports and open linear bearings

    Miniature Bearings Australia - MBA Minibearings

    Additional resources:


    A more concise listing may be found in the Shafting - Pre Drilled and Tapped - Stainless Steel category on the Small Parts & Bearings online store.
    Diameter (D) Length (L) Material Thread Size Hole Pitch (P) Surface Finish Indicative
    Image
    Diameter (D)
    12.700
    mm
    - 0.010 / - 0.030
    (Equiv. 0.5 in.)
    Length (L)
    609.6
    mm

    (Equiv. 24 in.)
    Material
    440C Case Hardened Stainless

    Hole Pitch (P)
    101.6
    Surface Finish
    0.30 um
    Microns
    		Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless
    Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
    Part Number: 0R-0127-0610-DT-S440-T30
    Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless Shaft
    Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
    $539.50 AUD
    $539.50 AUD
    Each
    Excludes GST and overseas Taxes & Duties
    Quantity Required

    Backorder: Out of Stock.
    Diameter (D) Length (L) Material Thread Size Indicative
    Image
    Diameter (D)
    12.700
    mm
    - 0.010 / - 0.030
    (Equiv. 0.5 in.)
    Length (L)
    609.6
    mm

    (Equiv. 24 in.)
    Material
    440C Case Hardened Stainless

    		Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless
    Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
    Part Number: 0R-0127-0610-DT-S440-T30
    Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless Shaft
    Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
    $539.50 AUD
    $539.50 AUD
    Each
    Excludes GST and overseas Taxes & Duties
    Quantity Required

    Backorder: Out of Stock.
    Diameter (D)
    15.875
    mm
    - 0.010 / - 0.030
    (Equiv. 0.625 in.)
    Length (L)
    101.6
    mm

    (Equiv. 4 in.)
    Material
    440C Case Hardened Stainless

    Hole Pitch (P)
    101.6
    Surface Finish
    0.30 um
    Microns
    		Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless
    Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
    Part Number: 0R-0159-1829-DT-S440-T30
    Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless Shaft
    Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
    $1,545.50 AUD
    $1,854.60 AUD $1,545.50 AUD
    Each
    Excludes GST and overseas Taxes & Duties
    Quantity Required

    Backorder: Out of Stock.
    Diameter (D)
    15.875
    mm
    - 0.010 / - 0.030
    (Equiv. 0.625 in.)
    Length (L)
    101.6
    mm

    (Equiv. 4 in.)
    Material
    440C Case Hardened Stainless

    		Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless
    Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
    Part Number: 0R-0159-1829-DT-S440-T30
    Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless Shaft
    Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
    $1,545.50 AUD
    $1,854.60 AUD $1,545.50 AUD
    Each
    Excludes GST and overseas Taxes & Duties
    Quantity Required

    Backorder: Out of Stock.
    Diameter (D)
    15.875
    mm
    - 0.010 / - 0.030
    (Equiv. 0.625 in.)
    Length (L)
    609.6
    mm

    (Equiv. 24 in.)
    Material
    440C Case Hardened Stainless

    Hole Pitch (P)
    101.6
    Surface Finish
    0.30 um
    Microns
    		Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless
    Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
    Part Number: 0R-0159-0610-DT-S440-T30
    Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless Shaft
    Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
    $526.05 AUD
    $631.25 AUD $526.05 AUD
    Each
    Excludes GST and overseas Taxes & Duties
    Quantity Required

    Backorder: Out of Stock.
    Diameter (D)
    15.875
    mm
    - 0.010 / - 0.030
    (Equiv. 0.625 in.)
    Length (L)
    609.6
    mm

    (Equiv. 24 in.)
    Material
    440C Case Hardened Stainless

    		Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless
    Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
    Part Number: 0R-0159-0610-DT-S440-T30
    Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless Shaft
    Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
    $526.05 AUD
    $631.25 AUD $526.05 AUD
    Each
    Excludes GST and overseas Taxes & Duties
    Quantity Required

    Backorder: Out of Stock.
    Diameter (D)
    19.050
    mm
    - 0.010 / - 0.030
    (Equiv. 0.75 in.)
    Length (L)
    152.4
    mm

    (Equiv. 6 in.)
    Material
    440C Case Hardened Stainless

    Hole Pitch (P)
    152.4
    Surface Finish
    0.30 um
    Microns
    		Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless
    Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
    Part Number: 0R-0191-1829-DT-S440-T30
    Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless Shaft
    Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
    $1,621.14 AUD
    $1,945.36 AUD $1,621.14 AUD
    Each
    Excludes GST and overseas Taxes & Duties
    Quantity Required

    Backorder: Out of Stock.
    Diameter (D)
    19.050
    mm
    - 0.010 / - 0.030
    (Equiv. 0.75 in.)
    Length (L)
    152.4
    mm

    (Equiv. 6 in.)
    Material
    440C Case Hardened Stainless

    		Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless
    Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
    Part Number: 0R-0191-1829-DT-S440-T30
    Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless Shaft
    Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
    $1,621.14 AUD
    $1,945.36 AUD $1,621.14 AUD
    Each
    Excludes GST and overseas Taxes & Duties
    Quantity Required

    Backorder: Out of Stock.
    Diameter (D)
    19.050
    mm
    - 0.010 / - 0.030
    (Equiv. 0.75 in.)
    Length (L)
    610
    mm

    (Equiv. 24.016 in.)
    Material
    440C Case Hardened Stainless

    Hole Pitch (P)
    152.4
    Surface Finish
    0.30 um
    Microns
    		Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless
    Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
    Part Number: 0R-0191-0610-DT-S440-T30
    Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless Shaft
    Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
    $567.86 AUD
    $681.44 AUD $567.86 AUD
    Each
    Excludes GST and overseas Taxes & Duties
    Quantity Required

    Backorder: Out of Stock.
    Diameter (D)
    19.050
    mm
    - 0.010 / - 0.030
    (Equiv. 0.75 in.)
    Length (L)
    610
    mm

    (Equiv. 24.016 in.)
    Material
    440C Case Hardened Stainless

    		Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless
    Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
    Part Number: 0R-0191-0610-DT-S440-T30
    Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless Shaft
    Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
    $567.86 AUD
    $681.44 AUD $567.86 AUD
    Each
    Excludes GST and overseas Taxes & Duties
    Quantity Required

    Backorder: Out of Stock.
    Diameter (D)
    25.400
    mm
    - 0.010 / - 0.030
    (Equiv. 1 in.)
    Length (L)
    152.4
    mm

    (Equiv. 6 in.)
    Material
    440C Case Hardened Stainless

    Hole Pitch (P)
    152.4
    Surface Finish
    0.30 um
    Microns
    		Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless
    Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
    Part Number: 0R-0254-1829-DT-S440-T30
    Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless Shaft
    Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
    $2,125.32 AUD
    $2,550.38 AUD $2,125.32 AUD
    Each
    Excludes GST and overseas Taxes & Duties
    Quantity Required

    Backorder: Out of Stock.
    Diameter (D)
    25.400
    mm
    - 0.010 / - 0.030
    (Equiv. 1 in.)
    Length (L)
    152.4
    mm

    (Equiv. 6 in.)
    Material
    440C Case Hardened Stainless

    		Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless
    Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
    Part Number: 0R-0254-1829-DT-S440-T30
    Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless Shaft
    Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
    $2,125.32 AUD
    $2,550.38 AUD $2,125.32 AUD
    Each
    Excludes GST and overseas Taxes & Duties
    Quantity Required

    Backorder: Out of Stock.
    Diameter (D)
    25.400
    mm
    - 0.010 / - 0.030
    (Equiv. 1 in.)
    Length (L)
    610
    mm

    (Equiv. 24.016 in.)
    Material
    440C Case Hardened Stainless

    Hole Pitch (P)
    152.4
    Surface Finish
    0.30 um
    Microns
    		Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless
    Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
    Part Number: 0R-0254-0610-DT-S440-T30
    Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless Shaft
    Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
    $737.14 AUD
    $884.56 AUD $737.14 AUD
    Each
    Excludes GST and overseas Taxes & Duties
    Quantity Required

    Backorder: Out of Stock.
    Diameter (D)
    25.400
    mm
    - 0.010 / - 0.030
    (Equiv. 1 in.)
    Length (L)
    610
    mm

    (Equiv. 24.016 in.)
    Material
    440C Case Hardened Stainless

    		Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless
    Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
    Part Number: 0R-0254-0610-DT-S440-T30
    Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless Shaft
    Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
    $737.14 AUD
    $884.56 AUD $737.14 AUD
    Each
    Excludes GST and overseas Taxes & Duties
    Quantity Required

    Backorder: Out of Stock.
    Diameter (D)
    25.400
    mm
    - 0.010 / - 0.030
    (Equiv. 1 in.)
    Length (L)
    1219.2
    mm

    (Equiv. 48 in.)
    Material
    440C Case Hardened Stainless

    Hole Pitch (P)
    152.4
    Surface Finish
    0.30 um
    Microns
    		Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless
    Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
    Part Number: 0R-0254-1219-DT-S440-T30
    Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless Shaft
    Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
    $1,447.05 AUD
    $1,736.45 AUD $1,447.05 AUD
    Each
    Excludes GST and overseas Taxes & Duties
    Quantity Required

    Backorder: Out of Stock.
    Diameter (D)
    25.400
    mm
    - 0.010 / - 0.030
    (Equiv. 1 in.)
    Length (L)
    1219.2
    mm

    (Equiv. 48 in.)
    Material
    440C Case Hardened Stainless

    		Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless
    Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C    Ends: Finished and Chamfered   
    Part Number: 0R-0254-1219-DT-S440-T30
    Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless Shaft
    Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
    $1,447.05 AUD
    $1,736.45 AUD $1,447.05 AUD
    Each
    Excludes GST and overseas Taxes & Duties
    Quantity Required

    Backorder: Out of Stock.