Shafting - Pre Drilled and Tapped

Shafting -> Pre Drilled and Tapped

There are 8 products in the sub-categories of Shafting - Pre Drilled and Tapped. Browse the Shafting - Pre Drilled and Tapped products table. To narrow down the selection, please choose a sub-category from the links below.

Category Details

This category includes various types of pre drilled and tapped shafting.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Shafting - Pre Drilled and Tapped category on the Small Parts & Bearings online store.
Diameter (D) Length (L) Material Thread Size Hole Pitch (P) Surface Finish Indicative
Image
Diameter (D)
12.700
mm
- 0.010 / - 0.030
(Equiv. 0.5 in.)
Length (L)
609.6
mm

(Equiv. 24 in.)
Material
440C Case Hardened Stainless

Hole Pitch (P)
101.6
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0127-0610-DT-S440-T30
Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless Shaft
Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
$539.50 AUD
$539.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Diameter (D) Length (L) Material Thread Size Indicative
Image
Diameter (D)
12.700
mm
- 0.010 / - 0.030
(Equiv. 0.5 in.)
Length (L)
609.6
mm

(Equiv. 24 in.)
Material
440C Case Hardened Stainless

Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0127-0610-DT-S440-T30
Pre Drilled and Tapped Shafting - 12.7x609.6 mm - 440C Case Hardened Stainless Shaft
Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
$539.50 AUD
$539.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Diameter (D)
15.875
mm
- 0.010 / - 0.030
(Equiv. 0.625 in.)
Length (L)
101.6
mm

(Equiv. 4 in.)
Material
440C Case Hardened Stainless

Hole Pitch (P)
101.6
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-1829-DT-S440-T30
Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless Shaft
Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
$1,545.50 AUD
$1,854.60 AUD $1,545.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Diameter (D)
15.875
mm
- 0.010 / - 0.030
(Equiv. 0.625 in.)
Length (L)
101.6
mm

(Equiv. 4 in.)
Material
440C Case Hardened Stainless

Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-1829-DT-S440-T30
Pre Drilled and Tapped Shafting - 15.875x101.6 mm - 440C Case Hardened Stainless Shaft
Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
$1,545.50 AUD
$1,854.60 AUD $1,545.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Diameter (D)
15.875
mm
- 0.010 / - 0.030
(Equiv. 0.625 in.)
Length (L)
609.6
mm

(Equiv. 24 in.)
Material
440C Case Hardened Stainless

Hole Pitch (P)
101.6
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-0610-DT-S440-T30
Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless Shaft
Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
$526.05 AUD
$631.25 AUD $526.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Diameter (D)
15.875
mm
- 0.010 / - 0.030
(Equiv. 0.625 in.)
Length (L)
609.6
mm

(Equiv. 24 in.)
Material
440C Case Hardened Stainless

Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 101.6    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0159-0610-DT-S440-T30
Pre Drilled and Tapped Shafting - 15.875x609.6 mm - 440C Case Hardened Stainless Shaft
Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
$526.05 AUD
$631.25 AUD $526.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Diameter (D)
19.050
mm
- 0.010 / - 0.030
(Equiv. 0.75 in.)
Length (L)
152.4
mm

(Equiv. 6 in.)
Material
440C Case Hardened Stainless

Hole Pitch (P)
152.4
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-1829-DT-S440-T30
Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless Shaft
Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
$1,621.14 AUD
$1,945.36 AUD $1,621.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Diameter (D)
19.050
mm
- 0.010 / - 0.030
(Equiv. 0.75 in.)
Length (L)
152.4
mm

(Equiv. 6 in.)
Material
440C Case Hardened Stainless

Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-1829-DT-S440-T30
Pre Drilled and Tapped Shafting - 19.05x152.4 mm - 440C Case Hardened Stainless Shaft
Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
$1,621.14 AUD
$1,945.36 AUD $1,621.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Diameter (D)
19.050
mm
- 0.010 / - 0.030
(Equiv. 0.75 in.)
Length (L)
610
mm

(Equiv. 24.016 in.)
Material
440C Case Hardened Stainless

Hole Pitch (P)
152.4
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-0610-DT-S440-T30
Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless Shaft
Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
$567.86 AUD
$681.44 AUD $567.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Diameter (D)
19.050
mm
- 0.010 / - 0.030
(Equiv. 0.75 in.)
Length (L)
610
mm

(Equiv. 24.016 in.)
Material
440C Case Hardened Stainless

Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0191-0610-DT-S440-T30
Pre Drilled and Tapped Shafting - 19.05x610 mm - 440C Case Hardened Stainless Shaft
Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
$567.86 AUD
$681.44 AUD $567.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(Equiv. 1 in.)
Length (L)
152.4
mm

(Equiv. 6 in.)
Material
440C Case Hardened Stainless

Hole Pitch (P)
152.4
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1829-DT-S440-T30
Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless Shaft
Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
$2,125.32 AUD
$2,550.38 AUD $2,125.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(Equiv. 1 in.)
Length (L)
152.4
mm

(Equiv. 6 in.)
Material
440C Case Hardened Stainless

Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1829-DT-S440-T30
Pre Drilled and Tapped Shafting - 25.4x152.4 mm - 440C Case Hardened Stainless Shaft
Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
$2,125.32 AUD
$2,550.38 AUD $2,125.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(Equiv. 1 in.)
Length (L)
610
mm

(Equiv. 24.016 in.)
Material
440C Case Hardened Stainless

Hole Pitch (P)
152.4
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-0610-DT-S440-T30
Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless Shaft
Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
$737.14 AUD
$884.56 AUD $737.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(Equiv. 1 in.)
Length (L)
610
mm

(Equiv. 24.016 in.)
Material
440C Case Hardened Stainless

Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-0610-DT-S440-T30
Pre Drilled and Tapped Shafting - 25.4x610 mm - 440C Case Hardened Stainless Shaft
Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
$737.14 AUD
$884.56 AUD $737.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(Equiv. 1 in.)
Length (L)
1219.2
mm

(Equiv. 48 in.)
Material
440C Case Hardened Stainless

Hole Pitch (P)
152.4
Surface Finish
0.30 um
Microns
Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1219-DT-S440-T30
Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless Shaft
Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
$1,447.05 AUD
$1,736.45 AUD $1,447.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Diameter (D)
25.400
mm
- 0.010 / - 0.030
(Equiv. 1 in.)
Length (L)
1219.2
mm

(Equiv. 48 in.)
Material
440C Case Hardened Stainless

Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless
Material: Stainless Steel AISI 440C Carbon Steel Case Hardened    Hole Pitch (P): 152.4    Surface Finish: 0.30 um Microns    Hardness: 60-65 Rockwell C   
Category: Shafting - Pre Drilled and Tapped - Stainless Steel
Part Number: 0R-0254-1219-DT-S440-T30
Pre Drilled and Tapped Shafting - 25.4x1219.2 mm - 440C Case Hardened Stainless Shaft
Out of Stock | Backorder Now | Orders can be expected around Tue, Nov 11, 2025
$1,447.05 AUD
$1,736.45 AUD $1,447.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.