Retaining Rings - External - Snap Rings - Stainless Steel

Retaining Rings -> External -> Snap Rings -> Stainless Steel

There are 8 products in the sub-categories of Retaining Rings - External - Snap Rings - Stainless Steel. Browse the Retaining Rings - External - Snap Rings - Stainless Steel products table.

Category Details

A selection of Stainless Steel Snap Rings External Retaining Rings. Includes series M3200 / SP / ESP / M2400 / SW snaprings. Similar to a circlip without the lugs.

  • An expanded range may be available on special order. Please enquire.
  • 301 S11/S22 Stainless Steel.
  • Used on the outside diameter of a bearing, shaft or similar equipment

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Retaining Rings - External - Snap Rings - Stainless Steel category on the Small Parts & Bearings online store.
Shaft or Bearing OD (d1) Clip Thickness (T) Groove Dia. (Dg) Approx. Loose Circlip ID (A) Radial Wall (S) min/max Groove Width (W) Indicative
Image
Shaft or Bearing OD (d1)
3.00
mm

(Equiv. 0.118 in.)
Clip Thickness (T)
0.30
mm
+/- 0.02
(Equiv. 0.012 in.)
Groove Dia. (Dg)
2.70
mm
+ 0 / - 0.05
(Equiv. 0.106 in.)
Approx. Loose Circlip ID (A)
2.60
mm
Radial Wall (S) min/max
0.50
mm
+ 0 / - 0.10
Groove Width (W)
0.33
mm
External Retaining Rings - 3x0.3x2.7 mm - Stainless Steel 301 S11/S22
Material: Stainless Steel 301 S11/S22    Approx. Loose Clip OD: 3.6    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0030-LS-S1 (1000 Pcs)
External Retaining Rings - 3x0.3x2.7 mm Snap Rings - Stainless Steel 301 S11/S22 Snap Ring
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 20, 2025
$1,205.77 AUD
$1,446.93 AUD $1,205.77 AUD
Per 1000
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1) Clip Thickness (T) Groove Dia. (Dg) Approx. Loose Circlip ID (A) Indicative
Image
Shaft or Bearing OD (d1)
3.00
mm

(Equiv. 0.118 in.)
Clip Thickness (T)
0.30
mm
+/- 0.02
(Equiv. 0.012 in.)
Groove Dia. (Dg)
2.70
mm
+ 0 / - 0.05
(Equiv. 0.106 in.)
Approx. Loose Circlip ID (A)
2.60
mm
External Retaining Rings - 3x0.3x2.7 mm - Stainless Steel 301 S11/S22
Material: Stainless Steel 301 S11/S22    Radial Wall (S) min/max: 0.50 mm + 0 / - 0.10    Groove Width (W): 0.33 mm    Approx. Loose Clip OD: 3.6    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0030-LS-S1 (1000 Pcs)
External Retaining Rings - 3x0.3x2.7 mm Snap Rings - Stainless Steel 301 S11/S22 Snap Ring
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 20, 2025
$1,205.77 AUD
$1,446.93 AUD $1,205.77 AUD
Per 1000
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
4.00
mm

(Equiv. 0.157 in.)
Clip Thickness (T)
0.30
mm
+/- 0.02
(Equiv. 0.012 in.)
Groove Dia. (Dg)
3.70
mm
+ 0 / - 0.05
(Equiv. 0.146 in.)
Approx. Loose Circlip ID (A)
3.60
mm
Radial Wall (S) min/max
0.30
mm
+ 0 / - 0.10
Groove Width (W)
0.33
mm
External Retaining Rings - 4x0.3x3.7 mm - Stainless Steel 301 S11/S22
Material: Stainless Steel 301 S11/S22    Approx. Loose Clip OD: 4.2    Section Profile: Square Section   
Part Number: WRE-0040-SQ-S1 (1000 Pcs)
External Retaining Rings - 4x0.3x3.7 mm Snap Rings - Stainless Steel 301 S11/S22 Snap Ring
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 20, 2025
$1,205.77 AUD
$1,446.93 AUD $1,205.77 AUD
Per 1000
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
4.00
mm

(Equiv. 0.157 in.)
Clip Thickness (T)
0.30
mm
+/- 0.02
(Equiv. 0.012 in.)
Groove Dia. (Dg)
3.70
mm
+ 0 / - 0.05
(Equiv. 0.146 in.)
Approx. Loose Circlip ID (A)
3.60
mm
External Retaining Rings - 4x0.3x3.7 mm - Stainless Steel 301 S11/S22
Material: Stainless Steel 301 S11/S22    Radial Wall (S) min/max: 0.30 mm + 0 / - 0.10    Groove Width (W): 0.33 mm    Approx. Loose Clip OD: 4.2    Section Profile: Square Section   
Part Number: WRE-0040-SQ-S1 (1000 Pcs)
External Retaining Rings - 4x0.3x3.7 mm Snap Rings - Stainless Steel 301 S11/S22 Snap Ring
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 20, 2025
$1,205.77 AUD
$1,446.93 AUD $1,205.77 AUD
Per 1000
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
5.00
mm

(Equiv. 0.197 in.)
Clip Thickness (T)
0.40
mm
+/- 0.02
(Equiv. 0.016 in.)
Groove Dia. (Dg)
4.60
mm
+ 0 / - 0.05
(Equiv. 0.181 in.)
Approx. Loose Circlip ID (A)
4.50
mm
Radial Wall (S) min/max
0.70
mm
+ 0 / - 0.10
Groove Width (W)
0.44
mm
External Retaining Rings - 5x0.4x4.6 mm - Stainless Steel 301 S11/S22
Material: Stainless Steel 301 S11/S22    Approx. Loose Clip OD: 5.9    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0050-LS-S1 (5 Pcs)
External Retaining Rings - 5x0.4x4.6 mm Snap Rings - Stainless Steel 301 S11/S22 Snap Ring
95 units (475 pcs) Available Now | Further orders can be expected around Mon, Oct 20, 2025
$7.23 AUD
$7.23 AUD
Per 5
Quantity Required

95 units (475 pcs) Available Now. Backorder if more than 95.
Shaft or Bearing OD (d1)
5.00
mm

(Equiv. 0.197 in.)
Clip Thickness (T)
0.40
mm
+/- 0.02
(Equiv. 0.016 in.)
Groove Dia. (Dg)
4.60
mm
+ 0 / - 0.05
(Equiv. 0.181 in.)
Approx. Loose Circlip ID (A)
4.50
mm
External Retaining Rings - 5x0.4x4.6 mm - Stainless Steel 301 S11/S22
Material: Stainless Steel 301 S11/S22    Radial Wall (S) min/max: 0.70 mm + 0 / - 0.10    Groove Width (W): 0.44 mm    Approx. Loose Clip OD: 5.9    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0050-LS-S1 (5 Pcs)
External Retaining Rings - 5x0.4x4.6 mm Snap Rings - Stainless Steel 301 S11/S22 Snap Ring
95 units (475 pcs) Available Now | Further orders can be expected around Mon, Oct 20, 2025
$7.23 AUD
$7.23 AUD
Per 5
Quantity Required

95 units (475 pcs) Available Now. Backorder if more than 95.
Shaft or Bearing OD (d1)
6.00
mm

(Equiv. 0.236 in.)
Clip Thickness (T)
0.40
mm
+/- 0.02
(Equiv. 0.016 in.)
Groove Dia. (Dg)
5.60
mm
+ 0 / - 0.05
(Equiv. 0.22 in.)
Approx. Loose Circlip ID (A)
5.45
mm
Radial Wall (S) min/max
0.70
mm
+ 0 / - 0.10
Groove Width (W)
0.44
mm
External Retaining Rings - 6x0.4x5.6 mm - Stainless Steel 301 S11/S22
Material: Stainless Steel 301 S11/S22    Approx. Loose Clip OD: 6.85    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0060-LS-S1 (1000 Pcs)
External Retaining Rings - 6x0.4x5.6 mm Snap Rings - Stainless Steel 301 S11/S22 Snap Ring
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 20, 2025
$1,205.77 AUD
$1,446.93 AUD $1,205.77 AUD
Per 1000
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
6.00
mm

(Equiv. 0.236 in.)
Clip Thickness (T)
0.40
mm
+/- 0.02
(Equiv. 0.016 in.)
Groove Dia. (Dg)
5.60
mm
+ 0 / - 0.05
(Equiv. 0.22 in.)
Approx. Loose Circlip ID (A)
5.45
mm
External Retaining Rings - 6x0.4x5.6 mm - Stainless Steel 301 S11/S22
Material: Stainless Steel 301 S11/S22    Radial Wall (S) min/max: 0.70 mm + 0 / - 0.10    Groove Width (W): 0.44 mm    Approx. Loose Clip OD: 6.85    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0060-LS-S1 (1000 Pcs)
External Retaining Rings - 6x0.4x5.6 mm Snap Rings - Stainless Steel 301 S11/S22 Snap Ring
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 20, 2025
$1,205.77 AUD
$1,446.93 AUD $1,205.77 AUD
Per 1000
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
7.00
mm

(Equiv. 0.276 in.)
Clip Thickness (T)
0.40
mm
+/- 0.02
(Equiv. 0.016 in.)
Groove Dia. (Dg)
6.60
mm
+ 0 / - 0.05
(Equiv. 0.26 in.)
Approx. Loose Circlip ID (A)
6.45
mm
Radial Wall (S) min/max
0.70
mm
+ 0 / - 0.10
Groove Width (W)
0.44
mm
External Retaining Rings - 7x0.4x6.6 mm - Stainless Steel 301 S11/S22
Material: Stainless Steel 301 S11/S22    Approx. Loose Clip OD: 7.85    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0070-LS-S1 (1000 Pcs)
External Retaining Rings - 7x0.4x6.6 mm Snap Rings - Stainless Steel 301 S11/S22 Snap Ring
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 20, 2025
$1,527.59 AUD
$1,833.11 AUD $1,527.59 AUD
Per 1000
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
7.00
mm

(Equiv. 0.276 in.)
Clip Thickness (T)
0.40
mm
+/- 0.02
(Equiv. 0.016 in.)
Groove Dia. (Dg)
6.60
mm
+ 0 / - 0.05
(Equiv. 0.26 in.)
Approx. Loose Circlip ID (A)
6.45
mm
External Retaining Rings - 7x0.4x6.6 mm - Stainless Steel 301 S11/S22
Material: Stainless Steel 301 S11/S22    Radial Wall (S) min/max: 0.70 mm + 0 / - 0.10    Groove Width (W): 0.44 mm    Approx. Loose Clip OD: 7.85    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0070-LS-S1 (1000 Pcs)
External Retaining Rings - 7x0.4x6.6 mm Snap Rings - Stainless Steel 301 S11/S22 Snap Ring
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 20, 2025
$1,527.59 AUD
$1,833.11 AUD $1,527.59 AUD
Per 1000
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
8.00
mm

(Equiv. 0.315 in.)
Clip Thickness (T)
0.50
mm
+/- 0.02
(Equiv. 0.02 in.)
Groove Dia. (Dg)
7.50
mm
+ 0 / - 0.05
(Equiv. 0.295 in.)
Approx. Loose Circlip ID (A)
7.35
mm
Radial Wall (S) min/max
0.90
mm
+ 0 / - 0.10
Groove Width (W)
0.55
mm
External Retaining Rings - 8x0.5x7.5 mm - Stainless Steel 301 S11/S22
Material: Stainless Steel 301 S11/S22    Approx. Loose Clip OD: 9.15    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0080-LS-S1 (1000 Pcs)
External Retaining Rings - 8x0.5x7.5 mm Snap Rings - Stainless Steel 301 S11/S22 Snap Ring
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 20, 2025
$1,527.59 AUD
$1,833.11 AUD $1,527.59 AUD
Per 1000
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
8.00
mm

(Equiv. 0.315 in.)
Clip Thickness (T)
0.50
mm
+/- 0.02
(Equiv. 0.02 in.)
Groove Dia. (Dg)
7.50
mm
+ 0 / - 0.05
(Equiv. 0.295 in.)
Approx. Loose Circlip ID (A)
7.35
mm
External Retaining Rings - 8x0.5x7.5 mm - Stainless Steel 301 S11/S22
Material: Stainless Steel 301 S11/S22    Radial Wall (S) min/max: 0.90 mm + 0 / - 0.10    Groove Width (W): 0.55 mm    Approx. Loose Clip OD: 9.15    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0080-LS-S1 (1000 Pcs)
External Retaining Rings - 8x0.5x7.5 mm Snap Rings - Stainless Steel 301 S11/S22 Snap Ring
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 20, 2025
$1,527.59 AUD
$1,833.11 AUD $1,527.59 AUD
Per 1000
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
9.00
mm

(Equiv. 0.354 in.)
Clip Thickness (T)
0.50
mm
+/- 0.02
(Equiv. 0.02 in.)
Groove Dia. (Dg)
8.50
mm
+ 0 / - 0.05
(Equiv. 0.335 in.)
Approx. Loose Circlip ID (A)
8.30
mm
Radial Wall (S) min/max
0.90
mm
+ 0 / - 0.10
Groove Width (W)
0.55
mm
External Retaining Rings - 9x0.5x8.5 mm - Stainless Steel 301 S11/S22
Material: Stainless Steel 301 S11/S22    Approx. Loose Clip OD: 10.1    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0090-LS-S1 (1000 Pcs)
External Retaining Rings - 9x0.5x8.5 mm Snap Rings - Stainless Steel 301 S11/S22 Snap Ring
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 20, 2025
$1,527.59 AUD
$1,833.11 AUD $1,527.59 AUD
Per 1000
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
9.00
mm

(Equiv. 0.354 in.)
Clip Thickness (T)
0.50
mm
+/- 0.02
(Equiv. 0.02 in.)
Groove Dia. (Dg)
8.50
mm
+ 0 / - 0.05
(Equiv. 0.335 in.)
Approx. Loose Circlip ID (A)
8.30
mm
External Retaining Rings - 9x0.5x8.5 mm - Stainless Steel 301 S11/S22
Material: Stainless Steel 301 S11/S22    Radial Wall (S) min/max: 0.90 mm + 0 / - 0.10    Groove Width (W): 0.55 mm    Approx. Loose Clip OD: 10.1    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0090-LS-S1 (1000 Pcs)
External Retaining Rings - 9x0.5x8.5 mm Snap Rings - Stainless Steel 301 S11/S22 Snap Ring
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 20, 2025
$1,527.59 AUD
$1,833.11 AUD $1,527.59 AUD
Per 1000
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
10.0
mm

(Equiv. 0.394 in.)
Clip Thickness (T)
0.50
mm
+/- 0.02
(Equiv. 0.02 in.)
Groove Dia. (Dg)
9.50
mm
+ 0 / - 0.05
(Equiv. 0.374 in.)
Approx. Loose Circlip ID (A)
9.25
mm
Radial Wall (S) min/max
0.90
mm
+ 0 / - 0.10
Groove Width (W)
0.55
mm
External Retaining Rings - 10x0.5x9.5 mm - Stainless Steel 301 S11/S22
Material: Stainless Steel 301 S11/S22    Approx. Loose Clip OD: 11.05    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0100-LS-S1
External Retaining Rings - 10x0.5x9.5 mm Snap Rings - Stainless Steel 301 S11/S22 Snap Ring
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
10.0
mm

(Equiv. 0.394 in.)
Clip Thickness (T)
0.50
mm
+/- 0.02
(Equiv. 0.02 in.)
Groove Dia. (Dg)
9.50
mm
+ 0 / - 0.05
(Equiv. 0.374 in.)
Approx. Loose Circlip ID (A)
9.25
mm
External Retaining Rings - 10x0.5x9.5 mm - Stainless Steel 301 S11/S22
Material: Stainless Steel 301 S11/S22    Radial Wall (S) min/max: 0.90 mm + 0 / - 0.10    Groove Width (W): 0.55 mm    Approx. Loose Clip OD: 11.05    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0100-LS-S1
External Retaining Rings - 10x0.5x9.5 mm Snap Rings - Stainless Steel 301 S11/S22 Snap Ring
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.