Retaining Rings - External - Snap Rings - Carbon Steel

Retaining Rings -> External -> Snap Rings -> Carbon Steel

There are 372 products in the sub-categories of Retaining Rings - External - Snap Rings - Carbon Steel. Scroll down or follow the link to Retaining Rings - External - Snap Rings - Carbon Steel in the products table to see all these items combined into a handy table with filters.

Category Details

A selection of Carbon Steel Snap Rings External Retaining Rings. Includes series M3200 / SP / ESP / M2400 / SW snaprings. Similar to a circlip without the lugs.

  • An expanded range may be available on special order. Please enquire.
  • Carbon sping steel
  • Used on the outside diameter of a bearing, shaft or similar equipment

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Retaining Rings - External - Snap Rings - Carbon Steel category on the Small Parts & Bearings online store.
Shaft or Bearing OD (d1) Clip Thickness (T) Groove Dia. (Dg) Approx. Loose Circlip ID (A) Radial Wall (S) min/max Groove Width (W) Indicative
Image
Shaft or Bearing OD (d1)
3.18
mm

(Equiv. 0.125 in.)
Clip Thickness (T)
0.51
mm
+/- 0.05
(Equiv. 0.02 in.)
Groove Dia. (Dg)
2.92
mm
+ 0.08 / - 0.00
(Equiv. 0.115 in.)
Approx. Loose Circlip ID (A)
2.90
mm
+ 0.00 / - 0.50
Radial Wall (S) min/max
0.51
mm
+/- 0.05
Groove Width (W)
0.61
mm
External Retaining Rings - 3.18x0.51x2.92 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 3.92    Info: Axial Assembly - Closed Gap    Section Profile: Square Section   
Part Number: WRE-0032-SQ-C
External Retaining Rings - 3.18x0.51x2.92 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1) Clip Thickness (T) Groove Dia. (Dg) Approx. Loose Circlip ID (A) Indicative
Image
Shaft or Bearing OD (d1)
3.18
mm

(Equiv. 0.125 in.)
Clip Thickness (T)
0.51
mm
+/- 0.05
(Equiv. 0.02 in.)
Groove Dia. (Dg)
2.92
mm
+ 0.08 / - 0.00
(Equiv. 0.115 in.)
Approx. Loose Circlip ID (A)
2.90
mm
+ 0.00 / - 0.50
External Retaining Rings - 3.18x0.51x2.92 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.51 mm +/- 0.05    Groove Width (W): 0.61 mm    Approx. Loose Clip OD: 3.92    Info: Axial Assembly - Closed Gap    Section Profile: Square Section   
Part Number: WRE-0032-SQ-C
External Retaining Rings - 3.18x0.51x2.92 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
3.18
mm

(Equiv. 0.125 in.)
Clip Thickness (T)
0.51
mm
+/- 0.05
(Equiv. 0.02 in.)
Groove Dia. (Dg)
2.92
mm
+ 0.08 / - 0.00
(Equiv. 0.115 in.)
Approx. Loose Circlip ID (A)
2.90
mm
+ 0.00 / - 0.50
Radial Wall (S) min/max
0.51
mm
+/- 0.05
Groove Width (W)
0.61
mm
External Retaining Rings - 3.18x0.51x2.92 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 3.92    Info: Radial Assembly - Open Gap    Section Profile: Square Section   
Part Number: WRE-0032-SQ-O
External Retaining Rings - 3.18x0.51x2.92 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
3.18
mm

(Equiv. 0.125 in.)
Clip Thickness (T)
0.51
mm
+/- 0.05
(Equiv. 0.02 in.)
Groove Dia. (Dg)
2.92
mm
+ 0.08 / - 0.00
(Equiv. 0.115 in.)
Approx. Loose Circlip ID (A)
2.90
mm
+ 0.00 / - 0.50
External Retaining Rings - 3.18x0.51x2.92 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.51 mm +/- 0.05    Groove Width (W): 0.61 mm    Approx. Loose Clip OD: 3.92    Info: Radial Assembly - Open Gap    Section Profile: Square Section   
Part Number: WRE-0032-SQ-O
External Retaining Rings - 3.18x0.51x2.92 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
3.96
mm

(Equiv. 0.156 in.)
Clip Thickness (T)
0.51
mm
+/- 0.08
(Equiv. 0.02 in.)
Groove Dia. (Dg)
3.71
mm
+ 0.10 / - 0.00
(Equiv. 0.146 in.)
Approx. Loose Circlip ID (A)
3.68
mm
+ 0.00 / - 2.00
Radial Wall (S) min/max
0.51
mm
+/- 0.08
Groove Width (W)
0.61
mm
External Retaining Rings - 3.96x0.51x3.71 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 4.7    Info: Radial Assembly - Open Gap    Section Profile: Square Section   
Part Number: WRE-0039-SQ-O
External Retaining Rings - 3.96x0.51x3.71 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
3.96
mm

(Equiv. 0.156 in.)
Clip Thickness (T)
0.51
mm
+/- 0.08
(Equiv. 0.02 in.)
Groove Dia. (Dg)
3.71
mm
+ 0.10 / - 0.00
(Equiv. 0.146 in.)
Approx. Loose Circlip ID (A)
3.68
mm
+ 0.00 / - 2.00
External Retaining Rings - 3.96x0.51x3.71 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.51 mm +/- 0.08    Groove Width (W): 0.61 mm    Approx. Loose Clip OD: 4.7    Info: Radial Assembly - Open Gap    Section Profile: Square Section   
Part Number: WRE-0039-SQ-O
External Retaining Rings - 3.96x0.51x3.71 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
3.96
mm

(Equiv. 0.156 in.)
Clip Thickness (T)
0.51
mm
+/- 0.08
(Equiv. 0.02 in.)
Groove Dia. (Dg)
3.71
mm
+ 0.10 / - 0.00
(Equiv. 0.146 in.)
Approx. Loose Circlip ID (A)
3.68
mm
+ 0.00 / - 2.00
Radial Wall (S) min/max
0.51
mm
+/- 0.08
Groove Width (W)
0.61
mm
External Retaining Rings - 3.96x0.51x3.71 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 4.7    Info: Axial Assembly - Closed Gap    Section Profile: Square Section   
Part Number: WRE-0039-SQ-C
External Retaining Rings - 3.96x0.51x3.71 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
3.96
mm

(Equiv. 0.156 in.)
Clip Thickness (T)
0.51
mm
+/- 0.08
(Equiv. 0.02 in.)
Groove Dia. (Dg)
3.71
mm
+ 0.10 / - 0.00
(Equiv. 0.146 in.)
Approx. Loose Circlip ID (A)
3.68
mm
+ 0.00 / - 2.00
External Retaining Rings - 3.96x0.51x3.71 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.51 mm +/- 0.08    Groove Width (W): 0.61 mm    Approx. Loose Clip OD: 4.7    Info: Axial Assembly - Closed Gap    Section Profile: Square Section   
Part Number: WRE-0039-SQ-C
External Retaining Rings - 3.96x0.51x3.71 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
4.78
mm

(Equiv. 0.188 in.)
Clip Thickness (T)
0.38
mm
+/- 0.02
(Equiv. 0.015 in.)
Groove Dia. (Dg)
4.32
mm

(Equiv. 0.17 in.)
Approx. Loose Circlip ID (A)
4.47
mm
+ 0.00 / - 0.27
Radial Wall (S) min/max
0.64
mm
Groove Width (W)
0.43
mm
External Retaining Rings - 4.78x0.38x4.32 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 5.75    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0048-LS
External Retaining Rings - 4.78x0.38x4.32 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
4.78
mm

(Equiv. 0.188 in.)
Clip Thickness (T)
0.38
mm
+/- 0.02
(Equiv. 0.015 in.)
Groove Dia. (Dg)
4.32
mm

(Equiv. 0.17 in.)
Approx. Loose Circlip ID (A)
4.47
mm
+ 0.00 / - 0.27
External Retaining Rings - 4.78x0.38x4.32 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.64 mm    Groove Width (W): 0.43 mm    Approx. Loose Clip OD: 5.75    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0048-LS
External Retaining Rings - 4.78x0.38x4.32 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
4.78
mm

(Equiv. 0.188 in.)
Clip Thickness (T)
0.51
mm
+/- 0.05
(Equiv. 0.02 in.)
Groove Dia. (Dg)
4.52
mm
+ 0.08 / - 0.00
(Equiv. 0.178 in.)
Approx. Loose Circlip ID (A)
4.45
mm
+ 0.00 / - 0.50
Radial Wall (S) min/max
0.51
mm
+/- 0.05
Groove Width (W)
0.61
mm
External Retaining Rings - 4.78x0.51x4.52 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 5.47    Info: Radial Assembly - Open Gap    Section Profile: Square Section   
Part Number: WRE-0048-SQ-O
External Retaining Rings - 4.78x0.51x4.52 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
4.78
mm

(Equiv. 0.188 in.)
Clip Thickness (T)
0.51
mm
+/- 0.05
(Equiv. 0.02 in.)
Groove Dia. (Dg)
4.52
mm
+ 0.08 / - 0.00
(Equiv. 0.178 in.)
Approx. Loose Circlip ID (A)
4.45
mm
+ 0.00 / - 0.50
External Retaining Rings - 4.78x0.51x4.52 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.51 mm +/- 0.05    Groove Width (W): 0.61 mm    Approx. Loose Clip OD: 5.47    Info: Radial Assembly - Open Gap    Section Profile: Square Section   
Part Number: WRE-0048-SQ-O
External Retaining Rings - 4.78x0.51x4.52 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
4.78
mm

(Equiv. 0.188 in.)
Clip Thickness (T)
0.51
mm
+/- 0.05
(Equiv. 0.02 in.)
Groove Dia. (Dg)
4.52
mm
+ 0.08 / - 0.00
(Equiv. 0.178 in.)
Approx. Loose Circlip ID (A)
4.45
mm
+ 0.00 / - 0.50
Radial Wall (S) min/max
0.51
mm
+/- 0.05
Groove Width (W)
0.61
mm
External Retaining Rings - 4.78x0.51x4.52 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 5.47    Info: Axial Assembly - Closed Gap    Section Profile: Square Section   
Part Number: WRE-0048-SQ-C
External Retaining Rings - 4.78x0.51x4.52 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
4.78
mm

(Equiv. 0.188 in.)
Clip Thickness (T)
0.51
mm
+/- 0.05
(Equiv. 0.02 in.)
Groove Dia. (Dg)
4.52
mm
+ 0.08 / - 0.00
(Equiv. 0.178 in.)
Approx. Loose Circlip ID (A)
4.45
mm
+ 0.00 / - 0.50
External Retaining Rings - 4.78x0.51x4.52 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.51 mm +/- 0.05    Groove Width (W): 0.61 mm    Approx. Loose Clip OD: 5.47    Info: Axial Assembly - Closed Gap    Section Profile: Square Section   
Part Number: WRE-0048-SQ-C
External Retaining Rings - 4.78x0.51x4.52 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
4.78
mm

(Equiv. 0.188 in.)
Clip Thickness (T)
0.64
mm
+/- 0.05
(Equiv. 0.025 in.)
Groove Dia. (Dg)
4.47
mm
+ 0.08 / - 0.00
(Equiv. 0.176 in.)
Approx. Loose Circlip ID (A)
4.39
mm
+ 0.00 / - 0.50
Radial Wall (S) min/max
0.64
mm
+/- 0.05
Groove Width (W)
0.74
mm
External Retaining Rings - 4.78x0.64x4.47 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 5.67    Info: Axial Assembly - Closed Gap    Section Profile: Square Section   
Part Number: WRE-0048-SQ-HC
External Retaining Rings - 4.78x0.64x4.47 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
4.78
mm

(Equiv. 0.188 in.)
Clip Thickness (T)
0.64
mm
+/- 0.05
(Equiv. 0.025 in.)
Groove Dia. (Dg)
4.47
mm
+ 0.08 / - 0.00
(Equiv. 0.176 in.)
Approx. Loose Circlip ID (A)
4.39
mm
+ 0.00 / - 0.50
External Retaining Rings - 4.78x0.64x4.47 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.64 mm +/- 0.05    Groove Width (W): 0.74 mm    Approx. Loose Clip OD: 5.67    Info: Axial Assembly - Closed Gap    Section Profile: Square Section   
Part Number: WRE-0048-SQ-HC
External Retaining Rings - 4.78x0.64x4.47 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
4.78
mm

(Equiv. 0.188 in.)
Clip Thickness (T)
0.64
mm
+/- 0.05
(Equiv. 0.025 in.)
Groove Dia. (Dg)
4.47
mm
+ 0.08 / - 0.00
(Equiv. 0.176 in.)
Approx. Loose Circlip ID (A)
4.39
mm
+ 0.00 / - 0.50
Radial Wall (S) min/max
0.64
mm
+/- 0.05
Groove Width (W)
0.74
mm
External Retaining Rings - 4.78x0.64x4.47 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 5.67    Info: Radial Assembly - Open Gap    Section Profile: Square Section   
Part Number: WRE-0048-SQ-HO
External Retaining Rings - 4.78x0.64x4.47 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
4.78
mm

(Equiv. 0.188 in.)
Clip Thickness (T)
0.64
mm
+/- 0.05
(Equiv. 0.025 in.)
Groove Dia. (Dg)
4.47
mm
+ 0.08 / - 0.00
(Equiv. 0.176 in.)
Approx. Loose Circlip ID (A)
4.39
mm
+ 0.00 / - 0.50
External Retaining Rings - 4.78x0.64x4.47 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.64 mm +/- 0.05    Groove Width (W): 0.74 mm    Approx. Loose Clip OD: 5.67    Info: Radial Assembly - Open Gap    Section Profile: Square Section   
Part Number: WRE-0048-SQ-HO
External Retaining Rings - 4.78x0.64x4.47 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
5.00
mm

(Equiv. 0.197 in.)
Clip Thickness (T)
0.50
mm
+ 0 / - 0.10
(Equiv. 0.02 in.)
Groove Dia. (Dg)
4.80
mm
+ 0 / - 0.09
(Equiv. 0.189 in.)
Approx. Loose Circlip ID (A)
4.70
mm
Radial Wall (S) min/max
1.00
mm
+ 0 / - 0.10
Groove Width (W)
0.60
mm
External Retaining Rings - 5x0.5x4.8 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 6.7    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0050-LS (10 Pcs)
External Retaining Rings - 5x0.5x4.8 mm Snap Rings - Carbon Spring Steel Snap Ring
Out of Stock | Backorder Now | Orders can be expected around Thu, Apr 23, 2026
$14.41 AUD
$17.29 AUD $14.41 AUD
Per 10
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
5.00
mm

(Equiv. 0.197 in.)
Clip Thickness (T)
0.50
mm
+ 0 / - 0.10
(Equiv. 0.02 in.)
Groove Dia. (Dg)
4.80
mm
+ 0 / - 0.09
(Equiv. 0.189 in.)
Approx. Loose Circlip ID (A)
4.70
mm
External Retaining Rings - 5x0.5x4.8 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 1.00 mm + 0 / - 0.10    Groove Width (W): 0.60 mm    Approx. Loose Clip OD: 6.7    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0050-LS (10 Pcs)
External Retaining Rings - 5x0.5x4.8 mm Snap Rings - Carbon Spring Steel Snap Ring
Out of Stock | Backorder Now | Orders can be expected around Thu, Apr 23, 2026
$14.41 AUD
$17.29 AUD $14.41 AUD
Per 10
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
5.56
mm

(Equiv. 0.219 in.)
Clip Thickness (T)
0.38
mm
+/- 0.02
(Equiv. 0.015 in.)
Groove Dia. (Dg)
5.11
mm

(Equiv. 0.201 in.)
Approx. Loose Circlip ID (A)
5.21
mm
+ 0.00 / - 0.31
Radial Wall (S) min/max
0.64
mm
Groove Width (W)
0.43
mm
External Retaining Rings - 5.56x0.38x5.11 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 6.49    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0056-LS
External Retaining Rings - 5.56x0.38x5.11 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
5.56
mm

(Equiv. 0.219 in.)
Clip Thickness (T)
0.38
mm
+/- 0.02
(Equiv. 0.015 in.)
Groove Dia. (Dg)
5.11
mm

(Equiv. 0.201 in.)
Approx. Loose Circlip ID (A)
5.21
mm
+ 0.00 / - 0.31
External Retaining Rings - 5.56x0.38x5.11 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.64 mm    Groove Width (W): 0.43 mm    Approx. Loose Clip OD: 6.49    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0056-LS
External Retaining Rings - 5.56x0.38x5.11 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
5.56
mm

(Equiv. 0.219 in.)
Clip Thickness (T)
0.64
mm
+/- 0.08
(Equiv. 0.025 in.)
Groove Dia. (Dg)
5.26
mm
+ 0.10 / - 0.00
(Equiv. 0.207 in.)
Approx. Loose Circlip ID (A)
5.16
mm
+ 0.00 / - 2.00
Radial Wall (S) min/max
0.64
mm
+/- 0.08
Groove Width (W)
0.74
mm
External Retaining Rings - 5.56x0.64x5.26 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 6.44    Info: Axial Assembly - Closed Gap    Section Profile: Square Section   
Part Number: WRE-0056-SQ-C
External Retaining Rings - 5.56x0.64x5.26 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
5.56
mm

(Equiv. 0.219 in.)
Clip Thickness (T)
0.64
mm
+/- 0.08
(Equiv. 0.025 in.)
Groove Dia. (Dg)
5.26
mm
+ 0.10 / - 0.00
(Equiv. 0.207 in.)
Approx. Loose Circlip ID (A)
5.16
mm
+ 0.00 / - 2.00
External Retaining Rings - 5.56x0.64x5.26 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.64 mm +/- 0.08    Groove Width (W): 0.74 mm    Approx. Loose Clip OD: 6.44    Info: Axial Assembly - Closed Gap    Section Profile: Square Section   
Part Number: WRE-0056-SQ-C
External Retaining Rings - 5.56x0.64x5.26 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
5.56
mm

(Equiv. 0.219 in.)
Clip Thickness (T)
0.64
mm
+/- 0.08
(Equiv. 0.025 in.)
Groove Dia. (Dg)
5.26
mm
+ 0.10 / - 0.00
(Equiv. 0.207 in.)
Approx. Loose Circlip ID (A)
5.16
mm
+ 0.00 / - 2.00
Radial Wall (S) min/max
0.64
mm
+/- 0.08
Groove Width (W)
0.74
mm
External Retaining Rings - 5.56x0.64x5.26 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 6.44    Info: Radial Assembly - Open Gap    Section Profile: Square Section   
Part Number: WRE-0056-SQ-O
External Retaining Rings - 5.56x0.64x5.26 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
5.56
mm

(Equiv. 0.219 in.)
Clip Thickness (T)
0.64
mm
+/- 0.08
(Equiv. 0.025 in.)
Groove Dia. (Dg)
5.26
mm
+ 0.10 / - 0.00
(Equiv. 0.207 in.)
Approx. Loose Circlip ID (A)
5.16
mm
+ 0.00 / - 2.00
External Retaining Rings - 5.56x0.64x5.26 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.64 mm +/- 0.08    Groove Width (W): 0.74 mm    Approx. Loose Clip OD: 6.44    Info: Radial Assembly - Open Gap    Section Profile: Square Section   
Part Number: WRE-0056-SQ-O
External Retaining Rings - 5.56x0.64x5.26 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
6.00
mm

(Equiv. 0.236 in.)
Clip Thickness (T)
0.70
mm
+ 0 / - 0.10
(Equiv. 0.028 in.)
Groove Dia. (Dg)
5.70
mm
+ 0 / - 0.09
(Equiv. 0.224 in.)
Approx. Loose Circlip ID (A)
5.60
mm
Radial Wall (S) min/max
1.10
mm
+ 0 / - 0.10
Groove Width (W)
0.80
mm
External Retaining Rings - 6x0.7x5.7 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 7.8    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0060-LS (10 Pcs)
External Retaining Rings - 6x0.7x5.7 mm Snap Rings - Carbon Spring Steel Snap Ring
14 units (140 pcs) Available Now | Further orders can be expected around Sun, Oct 05, 2025
$18.23 AUD
$18.23 AUD
Per 10
Quantity Required

14 units (140 pcs) Available Now. Backorder if more than 14.
Shaft or Bearing OD (d1)
6.00
mm

(Equiv. 0.236 in.)
Clip Thickness (T)
0.70
mm
+ 0 / - 0.10
(Equiv. 0.028 in.)
Groove Dia. (Dg)
5.70
mm
+ 0 / - 0.09
(Equiv. 0.224 in.)
Approx. Loose Circlip ID (A)
5.60
mm
External Retaining Rings - 6x0.7x5.7 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 1.10 mm + 0 / - 0.10    Groove Width (W): 0.80 mm    Approx. Loose Clip OD: 7.8    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0060-LS (10 Pcs)
External Retaining Rings - 6x0.7x5.7 mm Snap Rings - Carbon Spring Steel Snap Ring
14 units (140 pcs) Available Now | Further orders can be expected around Sun, Oct 05, 2025
$18.23 AUD
$18.23 AUD
Per 10
Quantity Required

14 units (140 pcs) Available Now. Backorder if more than 14.
Shaft or Bearing OD (d1)
6.35
mm

(Equiv. 0.25 in.)
Clip Thickness (T)
0.64
mm
+/- 0.03
(Equiv. 0.025 in.)
Groove Dia. (Dg)
5.89
mm

(Equiv. 0.232 in.)
Approx. Loose Circlip ID (A)
5.84
mm
+ 0.00 / - 0.35
Radial Wall (S) min/max
0.89
mm
Groove Width (W)
0.71
mm
External Retaining Rings - 6.35x0.64x5.89 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 7.62    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0064-LS (800 Pcs)
External Retaining Rings - 6.35x0.64x5.89 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
6.35
mm

(Equiv. 0.25 in.)
Clip Thickness (T)
0.64
mm
+/- 0.03
(Equiv. 0.025 in.)
Groove Dia. (Dg)
5.89
mm

(Equiv. 0.232 in.)
Approx. Loose Circlip ID (A)
5.84
mm
+ 0.00 / - 0.35
External Retaining Rings - 6.35x0.64x5.89 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.89 mm    Groove Width (W): 0.71 mm    Approx. Loose Clip OD: 7.62    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0064-LS (800 Pcs)
External Retaining Rings - 6.35x0.64x5.89 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
6.35
mm

(Equiv. 0.25 in.)
Clip Thickness (T)
0.64
mm
+/- 0.05
(Equiv. 0.025 in.)
Groove Dia. (Dg)
6.05
mm
+ 0.08 / - 0.00
(Equiv. 0.238 in.)
Approx. Loose Circlip ID (A)
5.99
mm
+ 0.00 / - 0.50
Radial Wall (S) min/max
0.64
mm
+/- 0.05
Groove Width (W)
0.76
mm
External Retaining Rings - 6.35x0.64x6.05 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 7.27    Info: Axial Assembly - Closed Gap    Section Profile: Square Section   
Part Number: WRE-0064-SQ-C (100 Pcs)
External Retaining Rings - 6.35x0.64x6.05 mm Snap Rings - Carbon Spring Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, Sep 26, 2025
$8.59 AUD
$10.31 AUD $8.59 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
6.35
mm

(Equiv. 0.25 in.)
Clip Thickness (T)
0.64
mm
+/- 0.05
(Equiv. 0.025 in.)
Groove Dia. (Dg)
6.05
mm
+ 0.08 / - 0.00
(Equiv. 0.238 in.)
Approx. Loose Circlip ID (A)
5.99
mm
+ 0.00 / - 0.50
External Retaining Rings - 6.35x0.64x6.05 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.64 mm +/- 0.05    Groove Width (W): 0.76 mm    Approx. Loose Clip OD: 7.27    Info: Axial Assembly - Closed Gap    Section Profile: Square Section   
Part Number: WRE-0064-SQ-C (100 Pcs)
External Retaining Rings - 6.35x0.64x6.05 mm Snap Rings - Carbon Spring Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, Sep 26, 2025
$8.59 AUD
$10.31 AUD $8.59 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
6.35
mm

(Equiv. 0.25 in.)
Clip Thickness (T)
0.64
mm
+/- 0.05
(Equiv. 0.025 in.)
Groove Dia. (Dg)
6.05
mm
+ 0.08 / - 0.00
(Equiv. 0.238 in.)
Approx. Loose Circlip ID (A)
5.99
mm
+ 0.00 / - 0.50
Radial Wall (S) min/max
0.64
mm
+/- 0.05
Groove Width (W)
0.76
mm
External Retaining Rings - 6.35x0.64x6.05 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 7.27    Info: Radial Assembly - Open Gap    Section Profile: Square Section   
Part Number: WRE-0064-SQ-O (50 Pcs)
External Retaining Rings - 6.35x0.64x6.05 mm Snap Rings - Carbon Spring Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, Sep 26, 2025
$24.77 AUD
$29.73 AUD $24.77 AUD
Per 50
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
6.35
mm

(Equiv. 0.25 in.)
Clip Thickness (T)
0.64
mm
+/- 0.05
(Equiv. 0.025 in.)
Groove Dia. (Dg)
6.05
mm
+ 0.08 / - 0.00
(Equiv. 0.238 in.)
Approx. Loose Circlip ID (A)
5.99
mm
+ 0.00 / - 0.50
External Retaining Rings - 6.35x0.64x6.05 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.64 mm +/- 0.05    Groove Width (W): 0.76 mm    Approx. Loose Clip OD: 7.27    Info: Radial Assembly - Open Gap    Section Profile: Square Section   
Part Number: WRE-0064-SQ-O (50 Pcs)
External Retaining Rings - 6.35x0.64x6.05 mm Snap Rings - Carbon Spring Steel
Out of Stock | Backorder Now | Orders can be expected around Fri, Sep 26, 2025
$24.77 AUD
$29.73 AUD $24.77 AUD
Per 50
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
6.35
mm

(Equiv. 0.25 in.)
Clip Thickness (T)
0.79
mm
+/- 0.05
(Equiv. 0.031 in.)
Groove Dia. (Dg)
5.94
mm
+ 0.08 / - 0.00
(Equiv. 0.234 in.)
Approx. Loose Circlip ID (A)
5.89
mm
+ 0.00 / - 0.50
Radial Wall (S) min/max
0.79
mm
+/- 0.05
Groove Width (W)
0.91
mm
External Retaining Rings - 6.35x0.79x5.94 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 7.47    Info: Radial Assembly - Open Gap    Section Profile: Square Section   
Part Number: WRE-0064-SQ-HO
External Retaining Rings - 6.35x0.79x5.94 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
6.35
mm

(Equiv. 0.25 in.)
Clip Thickness (T)
0.79
mm
+/- 0.05
(Equiv. 0.031 in.)
Groove Dia. (Dg)
5.94
mm
+ 0.08 / - 0.00
(Equiv. 0.234 in.)
Approx. Loose Circlip ID (A)
5.89
mm
+ 0.00 / - 0.50
External Retaining Rings - 6.35x0.79x5.94 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.79 mm +/- 0.05    Groove Width (W): 0.91 mm    Approx. Loose Clip OD: 7.47    Info: Radial Assembly - Open Gap    Section Profile: Square Section   
Part Number: WRE-0064-SQ-HO
External Retaining Rings - 6.35x0.79x5.94 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
7.00
mm

(Equiv. 0.276 in.)
Clip Thickness (T)
0.70
mm
+ 0 / - 0.10
(Equiv. 0.028 in.)
Groove Dia. (Dg)
6.70
mm
+ 0 / - 0.09
(Equiv. 0.264 in.)
Approx. Loose Circlip ID (A)
6.50
mm
Radial Wall (S) min/max
1.20
mm
+ 0 / - 0.10
Groove Width (W)
0.80
mm
External Retaining Rings - 7x0.7x6.7 mm Snap Rings - Carbon Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 8.9    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0070-LS (10 Pcs)
External Retaining Rings - 7x0.7x6.7 mm Snap Rings - Carbon Spring Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, Oct 05, 2025
$83.50 AUD
$83.50 AUD
Per 10
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
7.00
mm

(Equiv. 0.276 in.)
Clip Thickness (T)
0.70
mm
+ 0 / - 0.10
(Equiv. 0.028 in.)
Groove Dia. (Dg)
6.70
mm
+ 0 / - 0.09
(Equiv. 0.264 in.)
Approx. Loose Circlip ID (A)
6.50
mm
External Retaining Rings - 7x0.7x6.7 mm Snap Rings - Carbon Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 1.20 mm + 0 / - 0.10    Groove Width (W): 0.80 mm    Approx. Loose Clip OD: 8.9    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0070-LS (10 Pcs)
External Retaining Rings - 7x0.7x6.7 mm Snap Rings - Carbon Spring Steel
Out of Stock | Backorder Now | Orders can be expected around Sun, Oct 05, 2025
$83.50 AUD
$83.50 AUD
Per 10
Quantity Required

Backorder: Out of Stock.
Shaft or Bearing OD (d1)
7.14
mm

(Equiv. 0.281 in.)
Clip Thickness (T)
0.64
mm
+/- 0.03
(Equiv. 0.025 in.)
Groove Dia. (Dg)
6.68
mm

(Equiv. 0.263 in.)
Approx. Loose Circlip ID (A)
6.63
mm
+ 0.00 / - 0.40
Radial Wall (S) min/max
0.89
mm
Groove Width (W)
0.71
mm
External Retaining Rings - 7.14x0.64x6.68 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 8.41    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0071-LS
External Retaining Rings - 7.14x0.64x6.68 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
7.14
mm

(Equiv. 0.281 in.)
Clip Thickness (T)
0.64
mm
+/- 0.03
(Equiv. 0.025 in.)
Groove Dia. (Dg)
6.68
mm

(Equiv. 0.263 in.)
Approx. Loose Circlip ID (A)
6.63
mm
+ 0.00 / - 0.40
External Retaining Rings - 7.14x0.64x6.68 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.89 mm    Groove Width (W): 0.71 mm    Approx. Loose Clip OD: 8.41    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0071-LS
External Retaining Rings - 7.14x0.64x6.68 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
7.14
mm

(Equiv. 0.281 in.)
Clip Thickness (T)
0.79
mm
+/- 0.08
(Equiv. 0.031 in.)
Groove Dia. (Dg)
6.73
mm
+ 0.10 / - 0.00
(Equiv. 0.265 in.)
Approx. Loose Circlip ID (A)
6.63
mm
+ 0.00 / - 2.00
Radial Wall (S) min/max
0.79
mm
+/- 0.08
Groove Width (W)
0.91
mm
External Retaining Rings - 7.14x0.79x6.73 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 8.21    Info: Axial Assembly - Closed Gap    Section Profile: Square Section   
Part Number: WRE-0071-SQ-C
External Retaining Rings - 7.14x0.79x6.73 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
7.14
mm

(Equiv. 0.281 in.)
Clip Thickness (T)
0.79
mm
+/- 0.08
(Equiv. 0.031 in.)
Groove Dia. (Dg)
6.73
mm
+ 0.10 / - 0.00
(Equiv. 0.265 in.)
Approx. Loose Circlip ID (A)
6.63
mm
+ 0.00 / - 2.00
External Retaining Rings - 7.14x0.79x6.73 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.79 mm +/- 0.08    Groove Width (W): 0.91 mm    Approx. Loose Clip OD: 8.21    Info: Axial Assembly - Closed Gap    Section Profile: Square Section   
Part Number: WRE-0071-SQ-C
External Retaining Rings - 7.14x0.79x6.73 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
7.14
mm

(Equiv. 0.281 in.)
Clip Thickness (T)
0.79
mm
+/- 0.08
(Equiv. 0.031 in.)
Groove Dia. (Dg)
6.73
mm
+ 0.10 / - 0.00
(Equiv. 0.265 in.)
Approx. Loose Circlip ID (A)
6.63
mm
+ 0.00 / - 2.00
Radial Wall (S) min/max
0.79
mm
+/- 0.08
Groove Width (W)
0.91
mm
External Retaining Rings - 7.14x0.79x6.73 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 8.21    Info: Radial Assembly - Open Gap    Section Profile: Square Section   
Part Number: WRE-0071-SQ-O
External Retaining Rings - 7.14x0.79x6.73 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
7.14
mm

(Equiv. 0.281 in.)
Clip Thickness (T)
0.79
mm
+/- 0.08
(Equiv. 0.031 in.)
Groove Dia. (Dg)
6.73
mm
+ 0.10 / - 0.00
(Equiv. 0.265 in.)
Approx. Loose Circlip ID (A)
6.63
mm
+ 0.00 / - 2.00
External Retaining Rings - 7.14x0.79x6.73 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 0.79 mm +/- 0.08    Groove Width (W): 0.91 mm    Approx. Loose Clip OD: 8.21    Info: Radial Assembly - Open Gap    Section Profile: Square Section   
Part Number: WRE-0071-SQ-O
External Retaining Rings - 7.14x0.79x6.73 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
7.93
mm

(Equiv. 0.312 in.)
Clip Thickness (T)
0.64
mm
+/- 0.03
(Equiv. 0.025 in.)
Groove Dia. (Dg)
7.42
mm

(Equiv. 0.292 in.)
Approx. Loose Circlip ID (A)
7.37
mm
+ 0.00 / - 0.44
Radial Wall (S) min/max
1.02
mm
Groove Width (W)
0.71
mm
External Retaining Rings - 7.93x0.64x7.42 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 9.41    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0079-LS-L
External Retaining Rings - 7.93x0.64x7.42 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
7.93
mm

(Equiv. 0.312 in.)
Clip Thickness (T)
0.64
mm
+/- 0.03
(Equiv. 0.025 in.)
Groove Dia. (Dg)
7.42
mm

(Equiv. 0.292 in.)
Approx. Loose Circlip ID (A)
7.37
mm
+ 0.00 / - 0.44
External Retaining Rings - 7.93x0.64x7.42 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 1.02 mm    Groove Width (W): 0.71 mm    Approx. Loose Clip OD: 9.41    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0079-LS-L
External Retaining Rings - 7.93x0.64x7.42 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
7.93
mm

(Equiv. 0.312 in.)
Clip Thickness (T)
0.64
mm
+/- 0.05
(Equiv. 0.025 in.)
Groove Dia. (Dg)
7.37
mm
+/- 0.05
(Equiv. 0.29 in.)
Approx. Loose Circlip ID (A)
7.14
mm
+ 0.00 / - 0.38
Radial Wall (S) min/max
1.02
mm
+/- 0.08
Groove Width (W)
0.71
mm
External Retaining Rings - 7.93x0.64x7.37 mm - Spring Steel
Material: Carbon Spring Steel    Approx. Loose Clip OD: 9.18    Info: Basic    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0079-LS
External Retaining Rings - 7.93x0.64x7.37 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Shaft or Bearing OD (d1)
7.93
mm

(Equiv. 0.312 in.)
Clip Thickness (T)
0.64
mm
+/- 0.05
(Equiv. 0.025 in.)
Groove Dia. (Dg)
7.37
mm
+/- 0.05
(Equiv. 0.29 in.)
Approx. Loose Circlip ID (A)
7.14
mm
+ 0.00 / - 0.38
External Retaining Rings - 7.93x0.64x7.37 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) min/max: 1.02 mm +/- 0.08    Groove Width (W): 0.71 mm    Approx. Loose Clip OD: 9.18    Info: Basic    Section Profile: Rectangular with Square Edge   
Part Number: WRE-0079-LS
External Retaining Rings - 7.93x0.64x7.37 mm Snap Rings - Carbon Spring Steel
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.