Retaining Rings - External - Circlips - Inverted

Retaining Rings -> External -> Circlips -> Inverted

There are 65 products in the sub-categories of Retaining Rings - External - Circlips - Inverted. Scroll down or follow the link to Retaining Rings - External - Circlips - Inverted in the products table to see all these items combined into a handy table with filters.

Category Details

A selection of Inverted Circlips External Retaining Rings. N1408 / SHI / 16626 / 4100 / 5108 - Spring Steel and Stainless Steel. Retaining rings. Snap Rings (USA).

  • An expanded range may be available on special order. Please enquire.
  • Tapered section ring with lugs inverted on the ID to allow use in tight areas with minimal clearance.
  • Less thrust load than standard circlips.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Retaining Rings - External - Circlips - Inverted category on the Small Parts & Bearings online store.
Shaft Diameter (Ds) Clip Thickness (T) Groove Dia. (Dg) Approx. Loose Circlip ID (A) Radial Wall (S) Approx. Groove Width (W) Indicative
Image
Shaft Diameter (Ds)
10.00
mm

(Equiv. 0.394 in.)
Clip Thickness (T)
0.60
mm
+ 0.00 / - 0.11
(Equiv. 0.024 in.)
Groove Dia. (Dg)
9.50
mm
+ 0.00 / - 0.05
(Equiv. 0.374 in.)
Approx. Loose Circlip ID (A)
9.20
mm
Radial Wall (S) Approx.
1.80
mm
Groove Width (W)
0.70
mm
External Retaining Rings - 10x0.6x9.5 mm - Spring Steel
Material: Carbon Spring Steel    Tool: PRS-E009   
Part Number: CCE-01000-C-V
External Retaining Rings - 10x0.6x9.5 mm Circlips - Carbon Spring Steel Circlip
Contact Us | Special Order Only - Please contact us if you need a large quantity
Shaft Diameter (Ds) Clip Thickness (T) Groove Dia. (Dg) Approx. Loose Circlip ID (A) Indicative
Image
Shaft Diameter (Ds)
10.00
mm

(Equiv. 0.394 in.)
Clip Thickness (T)
0.60
mm
+ 0.00 / - 0.11
(Equiv. 0.024 in.)
Groove Dia. (Dg)
9.50
mm
+ 0.00 / - 0.05
(Equiv. 0.374 in.)
Approx. Loose Circlip ID (A)
9.20
mm
External Retaining Rings - 10x0.6x9.5 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) Approx.: 1.80 mm    Groove Width (W): 0.70 mm    Tool: PRS-E009   
Part Number: CCE-01000-C-V
External Retaining Rings - 10x0.6x9.5 mm Circlips - Carbon Spring Steel Circlip
Contact Us | Special Order Only - Please contact us if you need a large quantity | Orders can be expected around Sat, Jul 01, 2028
Shaft Diameter (Ds)
12.70
mm

(Equiv. 0.5 in.)
Clip Thickness (T)
0.89
mm
+/- 0.051
(Equiv. 0.035 in.)
Groove Dia. (Dg)
11.89
mm
+/- 0.051
(Equiv. 0.468 in.)
Approx. Loose Circlip ID (A)
11.71
mm
Radial Wall (S) Approx.
1.04
mm
Groove Width (W)
0.99
mm
+ 0.08 / - 0.00
External Retaining Rings - 12.7x0.89x11.89 mm - Stainless Steel Grade PH15-7 Mo
Material: Stainless Steel Grade PH15-7 Mo    Tool: PRS-E038   
Part Number: CCE-01270-S15-V (4 Pcs)
External Retaining Rings - 12.7x0.89x11.89 mm Circlips - Stainless Steel Grade PH15-7 Mo Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$13.59 AUD
$30.94 AUD $13.59 AUD
4 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
12.70
mm

(Equiv. 0.5 in.)
Clip Thickness (T)
0.89
mm
+/- 0.051
(Equiv. 0.035 in.)
Groove Dia. (Dg)
11.89
mm
+/- 0.051
(Equiv. 0.468 in.)
Approx. Loose Circlip ID (A)
11.71
mm
External Retaining Rings - 12.7x0.89x11.89 mm - Stainless Steel Grade PH15-7 Mo
Material: Stainless Steel Grade PH15-7 Mo    Radial Wall (S) Approx.: 1.04 mm    Groove Width (W): 0.99 mm + 0.08 / - 0.00   Tool: PRS-E038   
Part Number: CCE-01270-S15-V (4 Pcs)
External Retaining Rings - 12.7x0.89x11.89 mm Circlips - Stainless Steel Grade PH15-7 Mo Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$13.59 AUD
$30.94 AUD $13.59 AUD
4 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
12.70
mm

(Equiv. 0.5 in.)
Clip Thickness (T)
0.89
mm
+/- 0.051
(Equiv. 0.035 in.)
Groove Dia. (Dg)
11.89
mm
+/- 0.051
(Equiv. 0.468 in.)
Approx. Loose Circlip ID (A)
11.71
mm
Radial Wall (S) Approx.
1.04
mm
Groove Width (W)
0.99
mm
+ 0.08 / - 0.00
External Retaining Rings - 12.7x0.89x11.89 mm - Carbon Steel
Material: Carbon Steel    Tool: PRS-E038   
Part Number: CCE-01270-C-V (10 Pcs)
External Retaining Rings - 12.7x0.89x11.89 mm Circlips - Carbon Steel Circlip
97 units (970 pcs) Available Now | Further orders can be expected around Mon, Nov 03, 2025
$6.77 AUD
$6.77 AUD
10 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

97 units (970 pcs) Available Now. Backorder if more than 97.
Shaft Diameter (Ds)
12.70
mm

(Equiv. 0.5 in.)
Clip Thickness (T)
0.89
mm
+/- 0.051
(Equiv. 0.035 in.)
Groove Dia. (Dg)
11.89
mm
+/- 0.051
(Equiv. 0.468 in.)
Approx. Loose Circlip ID (A)
11.71
mm
External Retaining Rings - 12.7x0.89x11.89 mm - Carbon Steel
Material: Carbon Steel    Radial Wall (S) Approx.: 1.04 mm    Groove Width (W): 0.99 mm + 0.08 / - 0.00   Tool: PRS-E038   
Part Number: CCE-01270-C-V (10 Pcs)
External Retaining Rings - 12.7x0.89x11.89 mm Circlips - Carbon Steel Circlip
97 units (970 pcs) Available Now | Further orders can be expected around Mon, Nov 03, 2025
$6.77 AUD
$6.77 AUD
10 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

97 units (970 pcs) Available Now. Backorder if more than 97.
Shaft Diameter (Ds)
14.29
mm

(Equiv. 0.563 in.)
Clip Thickness (T)
0.89
mm
+/- 0.051
(Equiv. 0.035 in.)
Groove Dia. (Dg)
13.46
mm
+/- 0.051
(Equiv. 0.53 in.)
Approx. Loose Circlip ID (A)
13.23
mm
Radial Wall (S) Approx.
1.09
mm
Groove Width (W)
0.99
mm
+ 0.08 / - 0.00
External Retaining Rings - 14.29x0.89x13.46 mm - Carbon Steel
Material: Carbon Steel    Tool: PRS-E038   
Part Number: CCE-01429-C-V (50 Pcs)
External Retaining Rings - 14.29x0.89x13.46 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Sat, Jan 03, 2026
$22.50 AUD
$52.60 AUD $22.50 AUD
50 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
14.29
mm

(Equiv. 0.563 in.)
Clip Thickness (T)
0.89
mm
+/- 0.051
(Equiv. 0.035 in.)
Groove Dia. (Dg)
13.46
mm
+/- 0.051
(Equiv. 0.53 in.)
Approx. Loose Circlip ID (A)
13.23
mm
External Retaining Rings - 14.29x0.89x13.46 mm - Carbon Steel
Material: Carbon Steel    Radial Wall (S) Approx.: 1.09 mm    Groove Width (W): 0.99 mm + 0.08 / - 0.00   Tool: PRS-E038   
Part Number: CCE-01429-C-V (50 Pcs)
External Retaining Rings - 14.29x0.89x13.46 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Sat, Jan 03, 2026
$22.50 AUD
$52.60 AUD $22.50 AUD
50 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
15.00
mm

(Equiv. 0.591 in.)
Clip Thickness (T)
1.00
mm
+ 0.00 / - 0.11
(Equiv. 0.039 in.)
Groove Dia. (Dg)
14.30
mm
+ 0.00 / - 0.06
(Equiv. 0.563 in.)
Approx. Loose Circlip ID (A)
13.80
mm
Radial Wall (S) Approx.
1.00
mm
Groove Width (W)
1.10
mm
External Retaining Rings - 15x1x14.3 mm - Carbon Steel
Material: Carbon Steel    Tool: PRS-E009   
Part Number: CCE-01500-C-V (100 Pcs)
External Retaining Rings - 15x1x14.3 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Sat, Dec 27, 2025
$32.95 AUD
$77.20 AUD $32.95 AUD
100 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
15.00
mm

(Equiv. 0.591 in.)
Clip Thickness (T)
1.00
mm
+ 0.00 / - 0.11
(Equiv. 0.039 in.)
Groove Dia. (Dg)
14.30
mm
+ 0.00 / - 0.06
(Equiv. 0.563 in.)
Approx. Loose Circlip ID (A)
13.80
mm
External Retaining Rings - 15x1x14.3 mm - Carbon Steel
Material: Carbon Steel    Radial Wall (S) Approx.: 1.00 mm    Groove Width (W): 1.10 mm    Tool: PRS-E009   
Part Number: CCE-01500-C-V (100 Pcs)
External Retaining Rings - 15x1x14.3 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Sat, Dec 27, 2025
$32.95 AUD
$77.20 AUD $32.95 AUD
100 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
15.09
mm

(Equiv. 0.594 in.)
Clip Thickness (T)
0.89
mm
+/- 0.076
(Equiv. 0.035 in.)
Groove Dia. (Dg)
14.20
mm
+/- 0.051
(Equiv. 0.559 in.)
Approx. Loose Circlip ID (A)
13.97
mm
Radial Wall (S) Approx.
1.17
mm
Groove Width (W)
0.99
mm
+ 0.08 / - 0.00
External Retaining Rings - 15.09x0.89x14.2 mm - Carbon Steel
Material: Carbon Steel    Tool: PRS-E038   
Part Number: CCE-01509-C-V (50 Pcs)
External Retaining Rings - 15.09x0.89x14.2 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$26.32 AUD
$61.60 AUD $26.32 AUD
50 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
15.09
mm

(Equiv. 0.594 in.)
Clip Thickness (T)
0.89
mm
+/- 0.076
(Equiv. 0.035 in.)
Groove Dia. (Dg)
14.20
mm
+/- 0.051
(Equiv. 0.559 in.)
Approx. Loose Circlip ID (A)
13.97
mm
External Retaining Rings - 15.09x0.89x14.2 mm - Carbon Steel
Material: Carbon Steel    Radial Wall (S) Approx.: 1.17 mm    Groove Width (W): 0.99 mm + 0.08 / - 0.00   Tool: PRS-E038   
Part Number: CCE-01509-C-V (50 Pcs)
External Retaining Rings - 15.09x0.89x14.2 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$26.32 AUD
$61.60 AUD $26.32 AUD
50 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
15.88
mm

(Equiv. 0.625 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
14.94
mm
+/- 0.051
(Equiv. 0.588 in.)
Approx. Loose Circlip ID (A)
14.71
mm
Radial Wall (S) Approx.
1.22
mm
Groove Width (W)
0.99
mm
+ 0.08 / - 0.00
External Retaining Rings - 15.88x1.07x14.94 mm - Carbon Steel
Material: Carbon Steel   
Part Number: CCE-01588-C-V (100 Pcs)
External Retaining Rings - 15.88x1.07x14.94 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$40.23 AUD
$94.40 AUD $40.23 AUD
100 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
15.88
mm

(Equiv. 0.625 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
14.94
mm
+/- 0.051
(Equiv. 0.588 in.)
Approx. Loose Circlip ID (A)
14.71
mm
External Retaining Rings - 15.88x1.07x14.94 mm - Carbon Steel
Material: Carbon Steel    Radial Wall (S) Approx.: 1.22 mm    Groove Width (W): 0.99 mm + 0.08 / - 0.00  
Part Number: CCE-01588-C-V (100 Pcs)
External Retaining Rings - 15.88x1.07x14.94 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$40.23 AUD
$94.40 AUD $40.23 AUD
100 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
16.00
mm

(Equiv. 0.63 in.)
Clip Thickness (T)
1.00
mm
+ 0.00 / - 0.11
(Equiv. 0.039 in.)
Groove Dia. (Dg)
15.20
mm
+ 0.00 / - 0.06
(Equiv. 0.598 in.)
Approx. Loose Circlip ID (A)
14.70
mm
Radial Wall (S) Approx.
2.30
mm
Groove Width (W)
1.10
mm
External Retaining Rings - 16x1x15.2 mm - Carbon Steel
Material: Carbon Steel    Tool: PRS-E009   
Part Number: CCE-01600-C-V (10 Pcs)
External Retaining Rings - 16x1x15.2 mm Circlips - Carbon Steel Circlip
40 units (400 pcs) Available Now | Further orders can be expected around Sat, Dec 27, 2025
$8.77 AUD
$8.77 AUD
10 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

40 units (400 pcs) Available Now. Backorder if more than 40.
Shaft Diameter (Ds)
16.00
mm

(Equiv. 0.63 in.)
Clip Thickness (T)
1.00
mm
+ 0.00 / - 0.11
(Equiv. 0.039 in.)
Groove Dia. (Dg)
15.20
mm
+ 0.00 / - 0.06
(Equiv. 0.598 in.)
Approx. Loose Circlip ID (A)
14.70
mm
External Retaining Rings - 16x1x15.2 mm - Carbon Steel
Material: Carbon Steel    Radial Wall (S) Approx.: 2.30 mm    Groove Width (W): 1.10 mm    Tool: PRS-E009   
Part Number: CCE-01600-C-V (10 Pcs)
External Retaining Rings - 16x1x15.2 mm Circlips - Carbon Steel Circlip
40 units (400 pcs) Available Now | Further orders can be expected around Sat, Dec 27, 2025
$8.77 AUD
$8.77 AUD
10 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

40 units (400 pcs) Available Now. Backorder if more than 40.
Shaft Diameter (Ds)
17.00
mm

(Equiv. 0.669 in.)
Clip Thickness (T)
1.00
mm
+ 0.00 / - 0.11
(Equiv. 0.039 in.)
Groove Dia. (Dg)
16.20
mm
+ 0.00 / - 0.06
(Equiv. 0.638 in.)
Approx. Loose Circlip ID (A)
15.70
mm
Radial Wall (S) Approx.
2.40
mm
Groove Width (W)
1.10
mm
External Retaining Rings - 17x1x16.2 mm - Carbon Steel
Material: Carbon Steel    Tool: PRS-E009   
Part Number: CCE-01700-C-V (5 Pcs)
External Retaining Rings - 17x1x16.2 mm Circlips - Carbon Steel Circlip
61 units (305 pcs) Available Now | Further orders can be expected around Sat, Dec 27, 2025
$1.41 AUD
$3.92 AUD $1.41 AUD
5 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

61 units (305 pcs) Available Now. Backorder if more than 61.
Shaft Diameter (Ds)
17.00
mm

(Equiv. 0.669 in.)
Clip Thickness (T)
1.00
mm
+ 0.00 / - 0.11
(Equiv. 0.039 in.)
Groove Dia. (Dg)
16.20
mm
+ 0.00 / - 0.06
(Equiv. 0.638 in.)
Approx. Loose Circlip ID (A)
15.70
mm
External Retaining Rings - 17x1x16.2 mm - Carbon Steel
Material: Carbon Steel    Radial Wall (S) Approx.: 2.40 mm    Groove Width (W): 1.10 mm    Tool: PRS-E009   
Part Number: CCE-01700-C-V (5 Pcs)
External Retaining Rings - 17x1x16.2 mm Circlips - Carbon Steel Circlip
61 units (305 pcs) Available Now | Further orders can be expected around Sat, Dec 27, 2025
$1.41 AUD
$3.92 AUD $1.41 AUD
5 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

61 units (305 pcs) Available Now. Backorder if more than 61.
Shaft Diameter (Ds)
17.46
mm

(Equiv. 0.687 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
16.41
mm
+/- 0.051
(Equiv. 0.646 in.)
Approx. Loose Circlip ID (A)
16.13
mm
Radial Wall (S) Approx.
1.32
mm
Groove Width (W)
1.17
mm
+ 0.08 / - 0.00
External Retaining Rings - 17.46x1.07x16.41 mm - Stainless Steel Grade PH15-7 Mo
Material: Stainless Steel Grade PH15-7 Mo   
Part Number: CCE-01746-S15-V (3 Pcs)
External Retaining Rings - 17.46x1.07x16.41 mm Circlips - Stainless Steel Grade PH15-7 Mo Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$9.59 AUD
$21.72 AUD $9.59 AUD
3 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
17.46
mm

(Equiv. 0.687 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
16.41
mm
+/- 0.051
(Equiv. 0.646 in.)
Approx. Loose Circlip ID (A)
16.13
mm
External Retaining Rings - 17.46x1.07x16.41 mm - Stainless Steel Grade PH15-7 Mo
Material: Stainless Steel Grade PH15-7 Mo    Radial Wall (S) Approx.: 1.32 mm    Groove Width (W): 1.17 mm + 0.08 / - 0.00  
Part Number: CCE-01746-S15-V (3 Pcs)
External Retaining Rings - 17.46x1.07x16.41 mm Circlips - Stainless Steel Grade PH15-7 Mo Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$9.59 AUD
$21.72 AUD $9.59 AUD
3 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
19.05
mm

(Equiv. 0.75 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
17.88
mm
+/- 0.051
(Equiv. 0.704 in.)
Approx. Loose Circlip ID (A)
17.60
mm
Radial Wall (S) Approx.
1.42
mm
Groove Width (W)
1.17
mm
+ 0.08 / - 0.00
External Retaining Rings - 19.05x1.07x17.88 mm - Stainless Steel Grade PH15-7 Mo
Material: Stainless Steel Grade PH15-7 Mo   
Part Number: CCE-01905-S15-V (3 Pcs)
External Retaining Rings - 19.05x1.07x17.88 mm Circlips - Stainless Steel Grade PH15-7 Mo Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$10.59 AUD
$23.95 AUD $10.59 AUD
3 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
19.05
mm

(Equiv. 0.75 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
17.88
mm
+/- 0.051
(Equiv. 0.704 in.)
Approx. Loose Circlip ID (A)
17.60
mm
External Retaining Rings - 19.05x1.07x17.88 mm - Stainless Steel Grade PH15-7 Mo
Material: Stainless Steel Grade PH15-7 Mo    Radial Wall (S) Approx.: 1.42 mm    Groove Width (W): 1.17 mm + 0.08 / - 0.00  
Part Number: CCE-01905-S15-V (3 Pcs)
External Retaining Rings - 19.05x1.07x17.88 mm Circlips - Stainless Steel Grade PH15-7 Mo Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$10.59 AUD
$23.95 AUD $10.59 AUD
3 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
19.05
mm

(Equiv. 0.75 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
17.88
mm
+/- 0.051
(Equiv. 0.704 in.)
Approx. Loose Circlip ID (A)
17.60
mm
Radial Wall (S) Approx.
1.42
mm
Groove Width (W)
1.17
mm
+ 0.08 / - 0.00
External Retaining Rings - 19.05x1.07x17.88 mm - Carbon Steel
Material: Carbon Steel   
Part Number: CCE-01905-C-V (50 Pcs)
External Retaining Rings - 19.05x1.07x17.88 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$32.32 AUD
$75.80 AUD $32.32 AUD
50 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
19.05
mm

(Equiv. 0.75 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
17.88
mm
+/- 0.051
(Equiv. 0.704 in.)
Approx. Loose Circlip ID (A)
17.60
mm
External Retaining Rings - 19.05x1.07x17.88 mm - Carbon Steel
Material: Carbon Steel    Radial Wall (S) Approx.: 1.42 mm    Groove Width (W): 1.17 mm + 0.08 / - 0.00  
Part Number: CCE-01905-C-V (50 Pcs)
External Retaining Rings - 19.05x1.07x17.88 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$32.32 AUD
$75.80 AUD $32.32 AUD
50 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
19.84
mm

(Equiv. 0.781 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
18.62
mm
+/- 0.051
(Equiv. 0.733 in.)
Approx. Loose Circlip ID (A)
18.34
mm
Radial Wall (S) Approx.
1.45
mm
Groove Width (W)
1.17
mm
+ 0.08 / - 0.00
External Retaining Rings - 19.84x1.07x18.62 mm - Carbon Steel
Material: Carbon Steel    Tool: PRS-E038   
Part Number: CCE-01984-C-V (2 Pcs)
External Retaining Rings - 19.84x1.07x18.62 mm Circlips - Carbon Steel Circlip
671 units (1342 pcs) Available Now | Further orders can be expected around Mon, Nov 03, 2025
$4.14 AUD
$4.14 AUD
2 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

671 units (1342 pcs) Available Now. Backorder if more than 671.
Shaft Diameter (Ds)
19.84
mm

(Equiv. 0.781 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
18.62
mm
+/- 0.051
(Equiv. 0.733 in.)
Approx. Loose Circlip ID (A)
18.34
mm
External Retaining Rings - 19.84x1.07x18.62 mm - Carbon Steel
Material: Carbon Steel    Radial Wall (S) Approx.: 1.45 mm    Groove Width (W): 1.17 mm + 0.08 / - 0.00   Tool: PRS-E038   
Part Number: CCE-01984-C-V (2 Pcs)
External Retaining Rings - 19.84x1.07x18.62 mm Circlips - Carbon Steel Circlip
671 units (1342 pcs) Available Now | Further orders can be expected around Mon, Nov 03, 2025
$4.14 AUD
$4.14 AUD
2 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

671 units (1342 pcs) Available Now. Backorder if more than 671.
Shaft Diameter (Ds)
20.00
mm

(Equiv. 0.787 in.)
Clip Thickness (T)
1.20
mm
+ 0.00 / - 0.15
(Equiv. 0.047 in.)
Groove Dia. (Dg)
19.00
mm
+ 0.00 / - 0.06
(Equiv. 0.748 in.)
Approx. Loose Circlip ID (A)
18.50
mm
Radial Wall (S) Approx.
2.80
mm
Groove Width (W)
1.30
mm
External Retaining Rings - 20x1.2x19 mm - Carbon Steel
Material: Carbon Steel    Tool: PRS-E013   
Part Number: CCE-02000-C-V (500 Pcs)
External Retaining Rings - 20x1.2x19 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Sat, Jan 03, 2026
$254.23 AUD
$598.00 AUD $254.23 AUD
500 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
20.00
mm

(Equiv. 0.787 in.)
Clip Thickness (T)
1.20
mm
+ 0.00 / - 0.15
(Equiv. 0.047 in.)
Groove Dia. (Dg)
19.00
mm
+ 0.00 / - 0.06
(Equiv. 0.748 in.)
Approx. Loose Circlip ID (A)
18.50
mm
External Retaining Rings - 20x1.2x19 mm - Carbon Steel
Material: Carbon Steel    Radial Wall (S) Approx.: 2.80 mm    Groove Width (W): 1.30 mm    Tool: PRS-E013   
Part Number: CCE-02000-C-V (500 Pcs)
External Retaining Rings - 20x1.2x19 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Sat, Jan 03, 2026
$254.23 AUD
$598.00 AUD $254.23 AUD
500 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
20.64
mm

(Equiv. 0.813 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
19.35
mm
+/- 0.051
(Equiv. 0.762 in.)
Approx. Loose Circlip ID (A)
19.10
mm
Radial Wall (S) Approx.
1.52
mm
Groove Width (W)
1.17
mm
+ 0.08 / - 0.00
External Retaining Rings - 20.64x1.07x19.35 mm - Carbon Steel
Material: Carbon Steel    Tool: PRS-E047   
Part Number: CCE-02064-C-V (50 Pcs)
External Retaining Rings - 20.64x1.07x19.35 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$31.14 AUD
$73.00 AUD $31.14 AUD
50 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
20.64
mm

(Equiv. 0.813 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
19.35
mm
+/- 0.051
(Equiv. 0.762 in.)
Approx. Loose Circlip ID (A)
19.10
mm
External Retaining Rings - 20.64x1.07x19.35 mm - Carbon Steel
Material: Carbon Steel    Radial Wall (S) Approx.: 1.52 mm    Groove Width (W): 1.17 mm + 0.08 / - 0.00   Tool: PRS-E047   
Part Number: CCE-02064-C-V (50 Pcs)
External Retaining Rings - 20.64x1.07x19.35 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$31.14 AUD
$73.00 AUD $31.14 AUD
50 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
21.00
mm

(Equiv. 0.827 in.)
Clip Thickness (T)
1.20
mm
+ 0.00 / - 0.15
(Equiv. 0.047 in.)
Groove Dia. (Dg)
20.00
mm
+ 0.00 / - 0.06
(Equiv. 0.787 in.)
Approx. Loose Circlip ID (A)
19.35
mm
Radial Wall (S) Approx.
2.80
mm
Groove Width (W)
1.30
mm
External Retaining Rings - 21x1.2x20 mm - Spring Steel
Material: Carbon Spring Steel    Tool: PRS-E013   
Part Number: CCE-02100-C-V
External Retaining Rings - 21x1.2x20 mm Circlips - Carbon Spring Steel Circlip
Contact Us | Special Order Only - Please contact us if you need a large quantity
Shaft Diameter (Ds)
21.00
mm

(Equiv. 0.827 in.)
Clip Thickness (T)
1.20
mm
+ 0.00 / - 0.15
(Equiv. 0.047 in.)
Groove Dia. (Dg)
20.00
mm
+ 0.00 / - 0.06
(Equiv. 0.787 in.)
Approx. Loose Circlip ID (A)
19.35
mm
External Retaining Rings - 21x1.2x20 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) Approx.: 2.80 mm    Groove Width (W): 1.30 mm    Tool: PRS-E013   
Part Number: CCE-02100-C-V
External Retaining Rings - 21x1.2x20 mm Circlips - Carbon Spring Steel Circlip
Contact Us | Special Order Only - Please contact us if you need a large quantity | Orders can be expected around Sat, Jul 01, 2028
Shaft Diameter (Ds)
22.00
mm

(Equiv. 0.866 in.)
Clip Thickness (T)
1.20
mm
+ 0.00 / - 0.15
(Equiv. 0.047 in.)
Groove Dia. (Dg)
21.00
mm
+ 0.00 / - 0.06
(Equiv. 0.827 in.)
Approx. Loose Circlip ID (A)
20.50
mm
Radial Wall (S) Approx.
3.00
mm
Groove Width (W)
1.30
mm
External Retaining Rings - 22x1.2x21 mm - Carbon Steel
Material: Carbon Steel    Tool: PRS-E013   
Part Number: CCE-02200-C-V (500 Pcs)
External Retaining Rings - 22x1.2x21 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 27, 2026
$524.59 AUD
$1,234.00 AUD $524.59 AUD
500 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
22.00
mm

(Equiv. 0.866 in.)
Clip Thickness (T)
1.20
mm
+ 0.00 / - 0.15
(Equiv. 0.047 in.)
Groove Dia. (Dg)
21.00
mm
+ 0.00 / - 0.06
(Equiv. 0.827 in.)
Approx. Loose Circlip ID (A)
20.50
mm
External Retaining Rings - 22x1.2x21 mm - Carbon Steel
Material: Carbon Steel    Radial Wall (S) Approx.: 3.00 mm    Groove Width (W): 1.30 mm    Tool: PRS-E013   
Part Number: CCE-02200-C-V (500 Pcs)
External Retaining Rings - 22x1.2x21 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Tue, Jan 27, 2026
$524.59 AUD
$1,234.00 AUD $524.59 AUD
500 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
22.23
mm

(Equiv. 0.875 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
20.85
mm
+/- 0.051
(Equiv. 0.821 in.)
Approx. Loose Circlip ID (A)
20.57
mm
Radial Wall (S) Approx.
1.63
mm
Groove Width (W)
1.17
mm
+ 0.08 / - 0.00
External Retaining Rings - 22.23x1.07x20.85 mm - Stainless Steel Grade PH15-7 Mo
Material: Stainless Steel Grade PH15-7 Mo   
Part Number: CCE-02223-S15-V
External Retaining Rings - 22.23x1.07x20.85 mm Circlips - Stainless Steel Grade PH15-7 Mo Circlip
Out of Stock | Backorder Now | Orders can be expected around Sat, Dec 27, 2025
$8.59 AUD
$18.01 AUD $8.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
22.23
mm

(Equiv. 0.875 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
20.85
mm
+/- 0.051
(Equiv. 0.821 in.)
Approx. Loose Circlip ID (A)
20.57
mm
External Retaining Rings - 22.23x1.07x20.85 mm - Stainless Steel Grade PH15-7 Mo
Material: Stainless Steel Grade PH15-7 Mo    Radial Wall (S) Approx.: 1.63 mm    Groove Width (W): 1.17 mm + 0.08 / - 0.00  
Part Number: CCE-02223-S15-V
External Retaining Rings - 22.23x1.07x20.85 mm Circlips - Stainless Steel Grade PH15-7 Mo Circlip
Out of Stock | Backorder Now | Orders can be expected around Sat, Dec 27, 2025
$8.59 AUD
$18.01 AUD $8.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
22.23
mm

(Equiv. 0.875 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
20.85
mm
+/- 0.051
(Equiv. 0.821 in.)
Approx. Loose Circlip ID (A)
20.57
mm
Radial Wall (S) Approx.
1.63
mm
Groove Width (W)
1.17
mm
+ 0.08 / - 0.00
External Retaining Rings - 22.23x1.07x20.85 mm - Carbon Steel
Material: Carbon Steel   
Part Number: CCE-02223-C-V (50 Pcs)
External Retaining Rings - 22.23x1.07x20.85 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$34.86 AUD
$81.80 AUD $34.86 AUD
50 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
22.23
mm

(Equiv. 0.875 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
20.85
mm
+/- 0.051
(Equiv. 0.821 in.)
Approx. Loose Circlip ID (A)
20.57
mm
External Retaining Rings - 22.23x1.07x20.85 mm - Carbon Steel
Material: Carbon Steel    Radial Wall (S) Approx.: 1.63 mm    Groove Width (W): 1.17 mm + 0.08 / - 0.00  
Part Number: CCE-02223-C-V (50 Pcs)
External Retaining Rings - 22.23x1.07x20.85 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$34.86 AUD
$81.80 AUD $34.86 AUD
50 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
23.00
mm

(Equiv. 0.906 in.)
Clip Thickness (T)
1.20
mm
+ 0.00 / - 0.15
(Equiv. 0.047 in.)
Groove Dia. (Dg)
22.00
mm
+ 0.00 / - 0.06
(Equiv. 0.866 in.)
Approx. Loose Circlip ID (A)
21.50
mm
Radial Wall (S) Approx.
3.10
mm
Groove Width (W)
1.30
mm
External Retaining Rings - 23x1.2x22 mm - Spring Steel
Material: Carbon Spring Steel    Tool: PRS-E013   
Part Number: CCE-02300-C-V (500 Pcs)
External Retaining Rings - 23x1.2x22 mm Circlips - Carbon Spring Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Sat, Dec 27, 2025
$376.68 AUD
$886.00 AUD $376.68 AUD
500 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
23.00
mm

(Equiv. 0.906 in.)
Clip Thickness (T)
1.20
mm
+ 0.00 / - 0.15
(Equiv. 0.047 in.)
Groove Dia. (Dg)
22.00
mm
+ 0.00 / - 0.06
(Equiv. 0.866 in.)
Approx. Loose Circlip ID (A)
21.50
mm
External Retaining Rings - 23x1.2x22 mm - Spring Steel
Material: Carbon Spring Steel    Radial Wall (S) Approx.: 3.10 mm    Groove Width (W): 1.30 mm    Tool: PRS-E013   
Part Number: CCE-02300-C-V (500 Pcs)
External Retaining Rings - 23x1.2x22 mm Circlips - Carbon Spring Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Sat, Dec 27, 2025
$376.68 AUD
$886.00 AUD $376.68 AUD
500 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
23.81
mm

(Equiv. 0.937 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
22.40
mm
+/- 0.051
(Equiv. 0.882 in.)
Approx. Loose Circlip ID (A)
22.02
mm
Radial Wall (S) Approx.
1.73
mm
Groove Width (W)
1.17
mm
+ 0.08 / - 0.00
External Retaining Rings - 23.81x1.07x22.4 mm - Stainless Steel Grade PH15-7 Mo
Material: Stainless Steel Grade PH15-7 Mo    Tool: PRS-E047   
Part Number: CCE-02381-S15-V (250 Pcs)
External Retaining Rings - 23.81x1.07x22.4 mm Circlips - Stainless Steel Grade PH15-7 Mo Circlip
Out of Stock | Backorder Now | Orders can be expected around Sat, Dec 27, 2025
$2,034.59 AUD
$4,785.00 AUD $2,034.59 AUD
250 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
23.81
mm

(Equiv. 0.937 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
22.40
mm
+/- 0.051
(Equiv. 0.882 in.)
Approx. Loose Circlip ID (A)
22.02
mm
External Retaining Rings - 23.81x1.07x22.4 mm - Stainless Steel Grade PH15-7 Mo
Material: Stainless Steel Grade PH15-7 Mo    Radial Wall (S) Approx.: 1.73 mm    Groove Width (W): 1.17 mm + 0.08 / - 0.00   Tool: PRS-E047   
Part Number: CCE-02381-S15-V (250 Pcs)
External Retaining Rings - 23.81x1.07x22.4 mm Circlips - Stainless Steel Grade PH15-7 Mo Circlip
Out of Stock | Backorder Now | Orders can be expected around Sat, Dec 27, 2025
$2,034.59 AUD
$4,785.00 AUD $2,034.59 AUD
250 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
24.00
mm

(Equiv. 0.945 in.)
Clip Thickness (T)
1.20
mm
+ 0.00 / - 0.21
(Equiv. 0.047 in.)
Groove Dia. (Dg)
22.90
mm
+ 0.00 / - 0.06
(Equiv. 0.902 in.)
Approx. Loose Circlip ID (A)
22.20
mm
Radial Wall (S) Approx.
3.20
mm
Groove Width (W)
1.30
mm
External Retaining Rings - 24x1.2x22.9 mm - Carbon Steel
Material: Carbon Steel    Tool: PRS-E013   
Part Number: CCE-02400-C-V (500 Pcs)
External Retaining Rings - 24x1.2x22.9 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$431.95 AUD
$1,016.00 AUD $431.95 AUD
500 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
24.00
mm

(Equiv. 0.945 in.)
Clip Thickness (T)
1.20
mm
+ 0.00 / - 0.21
(Equiv. 0.047 in.)
Groove Dia. (Dg)
22.90
mm
+ 0.00 / - 0.06
(Equiv. 0.902 in.)
Approx. Loose Circlip ID (A)
22.20
mm
External Retaining Rings - 24x1.2x22.9 mm - Carbon Steel
Material: Carbon Steel    Radial Wall (S) Approx.: 3.20 mm    Groove Width (W): 1.30 mm    Tool: PRS-E013   
Part Number: CCE-02400-C-V (500 Pcs)
External Retaining Rings - 24x1.2x22.9 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$431.95 AUD
$1,016.00 AUD $431.95 AUD
500 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
25.00
mm

(Equiv. 0.984 in.)
Clip Thickness (T)
1.20
mm
+ 0.00 / - 0.21
(Equiv. 0.047 in.)
Groove Dia. (Dg)
23.90
mm
+ 0.00 / - 0.06
(Equiv. 0.941 in.)
Approx. Loose Circlip ID (A)
23.20
mm
Radial Wall (S) Approx.
3.40
mm
Groove Width (W)
1.30
mm
External Retaining Rings - 25x1.2x23.9 mm - Carbon Steel
Material: Carbon Steel    Tool: PRS-E013   
Part Number: CCE-02500-C-V (5 Pcs)
External Retaining Rings - 25x1.2x23.9 mm Circlips - Carbon Steel Circlip
25 units (125 pcs) Available Now | Further orders can be expected around Sat, Dec 27, 2025
$9.50 AUD
$9.50 AUD
5 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

25 units (125 pcs) Available Now. Backorder if more than 25.
Shaft Diameter (Ds)
25.00
mm

(Equiv. 0.984 in.)
Clip Thickness (T)
1.20
mm
+ 0.00 / - 0.21
(Equiv. 0.047 in.)
Groove Dia. (Dg)
23.90
mm
+ 0.00 / - 0.06
(Equiv. 0.941 in.)
Approx. Loose Circlip ID (A)
23.20
mm
External Retaining Rings - 25x1.2x23.9 mm - Carbon Steel
Material: Carbon Steel    Radial Wall (S) Approx.: 3.40 mm    Groove Width (W): 1.30 mm    Tool: PRS-E013   
Part Number: CCE-02500-C-V (5 Pcs)
External Retaining Rings - 25x1.2x23.9 mm Circlips - Carbon Steel Circlip
25 units (125 pcs) Available Now | Further orders can be expected around Sat, Dec 27, 2025
$9.50 AUD
$9.50 AUD
5 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

25 units (125 pcs) Available Now. Backorder if more than 25.
Shaft Diameter (Ds)
25.40
mm

(Equiv. 1 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
23.52
mm
+/- 0.051
(Equiv. 0.926 in.)
Approx. Loose Circlip ID (A)
23.50
mm
Radial Wall (S) Approx.
1.83
mm
Groove Width (W)
1.17
mm
+ 0.08 / - 0.00
External Retaining Rings - 25.4x1.07x23.52 mm - Carbon Steel
Material: Carbon Steel    Tool: PRS-E047   
Part Number: CCE-02540-C-V (50 Pcs)
External Retaining Rings - 25.4x1.07x23.52 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$40.95 AUD
$96.00 AUD $40.95 AUD
50 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (Ds)
25.40
mm

(Equiv. 1 in.)
Clip Thickness (T)
1.07
mm
+/- 0.076
(Equiv. 0.042 in.)
Groove Dia. (Dg)
23.52
mm
+/- 0.051
(Equiv. 0.926 in.)
Approx. Loose Circlip ID (A)
23.50
mm
External Retaining Rings - 25.4x1.07x23.52 mm - Carbon Steel
Material: Carbon Steel    Radial Wall (S) Approx.: 1.83 mm    Groove Width (W): 1.17 mm + 0.08 / - 0.00   Tool: PRS-E047   
Part Number: CCE-02540-C-V (50 Pcs)
External Retaining Rings - 25.4x1.07x23.52 mm Circlips - Carbon Steel Circlip
Out of Stock | Backorder Now | Orders can be expected around Mon, Nov 03, 2025
$40.95 AUD
$96.00 AUD $40.95 AUD
50 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.