Ratchets and Pawls - Ratchets - With Hub

Ratchets and Pawls -> Ratchets -> With Hub

There are 13 products in the sub-categories of Ratchets and Pawls - Ratchets - With Hub. Browse the Ratchets and Pawls - Ratchets - With Hub products table.

Category Details

A selection of With Hub Ratchets Ratchets and Pawls. Match with pawls listed on this site.

  • An expanded range may be available on special order. Please enquire.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Ratchets and Pawls - Ratchets - With Hub category on the Small Parts & Bearings online store.
Pitch Teeth (No.) Outside Diameter Bore Face Width Hub Diameter Indicative
Image
Pitch
2.094 CP

Teeth (No.)
60

Outside Diameter
40
mm

(Equiv. 1.575 in.)
Bore
12.00
mm
Face Width
6
mm
Hub Diameter
30
mm
Ratchets Ratchets and Pawls - Pitch 2.094 CP 60 - 40 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Hub Projection: 10 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: 4.0x1.8 Keway   
Part Number: RT-060-0400-060-120-HH
Ratchets Ratchets and Pawls - Pitch 2.094 CP 60 - 40 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Pitch Teeth (No.) Outside Diameter Bore Indicative
Image
Pitch
2.094 CP

Teeth (No.)
60

Outside Diameter
40
mm

(Equiv. 1.575 in.)
Bore
12.00
mm
Ratchets Ratchets and Pawls - Pitch 2.094 CP 60 - 40 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Face Width: 6 mm    Hub Diameter: 30 mm    Hub Projection: 10 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: 4.0x1.8 Keway   
Part Number: RT-060-0400-060-120-HH
Ratchets Ratchets and Pawls - Pitch 2.094 CP 60 - 40 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Pitch
2.094 CP

Teeth (No.)
60

Outside Diameter
40
mm

(Equiv. 1.575 in.)
Bore
17.00
mm
Face Width
6
mm
Hub Diameter
30
mm
Ratchets Ratchets and Pawls - Pitch 2.094 CP 60 - 40 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Hub Projection: 10 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: 5.0x2.3 Keway   
Part Number: RT-060-0400-060-170-HH
Ratchets Ratchets and Pawls - Pitch 2.094 CP 60 - 40 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$156.95 AUD
$188.35 AUD $156.95 AUD
Each
Quantity Required

Backorder: Out of Stock.
Pitch
2.094 CP

Teeth (No.)
60

Outside Diameter
40
mm

(Equiv. 1.575 in.)
Bore
17.00
mm
Ratchets Ratchets and Pawls - Pitch 2.094 CP 60 - 40 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Face Width: 6 mm    Hub Diameter: 30 mm    Hub Projection: 10 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: 5.0x2.3 Keway   
Part Number: RT-060-0400-060-170-HH
Ratchets Ratchets and Pawls - Pitch 2.094 CP 60 - 40 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$156.95 AUD
$188.35 AUD $156.95 AUD
Each
Quantity Required

Backorder: Out of Stock.
Pitch
2.094 CP

Teeth (No.)
50

Outside Diameter
33.3
mm

(Equiv. 1.311 in.)
Bore
10.00
mm
Face Width
6
mm
Hub Diameter
25
mm
Ratchets Ratchets and Pawls - Pitch 2.094 CP 50 - 33.3 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Hub Projection: 10 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: No Keyway   
Part Number: RT-050-0333-060-100-HH
Ratchets Ratchets and Pawls - Pitch 2.094 CP 50 - 33.3 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
1 Available Now | Further orders can be expected around Fri, Oct 03, 2025
$33.41 AUD
$40.09 AUD $33.41 AUD
Each
Quantity Required

1 Available Now. Backorder if more than 1.
Pitch
2.094 CP

Teeth (No.)
50

Outside Diameter
33.3
mm

(Equiv. 1.311 in.)
Bore
10.00
mm
Ratchets Ratchets and Pawls - Pitch 2.094 CP 50 - 33.3 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Face Width: 6 mm    Hub Diameter: 25 mm    Hub Projection: 10 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: No Keyway   
Part Number: RT-050-0333-060-100-HH
Ratchets Ratchets and Pawls - Pitch 2.094 CP 50 - 33.3 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
1 Available Now | Further orders can be expected around Fri, Oct 03, 2025
$33.41 AUD
$40.09 AUD $33.41 AUD
Each
Quantity Required

1 Available Now. Backorder if more than 1.
Pitch
2.094 CP

Teeth (No.)
60

Outside Diameter
40
mm

(Equiv. 1.575 in.)
Bore
10.00
mm
Face Width
6
mm
Hub Diameter
30
mm
Ratchets Ratchets and Pawls - Pitch 2.094 CP 60 - 40 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Hub Projection: 10 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: No Keyway   
Part Number: RT-060-0400-060-100-HH
Ratchets Ratchets and Pawls - Pitch 2.094 CP 60 - 40 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Pitch
2.094 CP

Teeth (No.)
60

Outside Diameter
40
mm

(Equiv. 1.575 in.)
Bore
10.00
mm
Ratchets Ratchets and Pawls - Pitch 2.094 CP 60 - 40 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Face Width: 6 mm    Hub Diameter: 30 mm    Hub Projection: 10 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: No Keyway   
Part Number: RT-060-0400-060-100-HH
Ratchets Ratchets and Pawls - Pitch 2.094 CP 60 - 40 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Quantity Required

Contact Us. These are priced to quit. Please contact us for a quote if you require more.
Pitch
2.094 CP

Teeth (No.)
80

Outside Diameter
53.3
mm

(Equiv. 2.098 in.)
Bore
12.00
mm
Face Width
6
mm
Hub Diameter
35
mm
Ratchets Ratchets and Pawls - Pitch 2.094 CP 80 - 53.3 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Hub Projection: 10 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: No Keyway   
Part Number: RT-080-0533-060-120-HH
Ratchets Ratchets and Pawls - Pitch 2.094 CP 80 - 53.3 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
1 Available Now | Further orders can be expected around Fri, Oct 03, 2025
$46.23 AUD
$55.47 AUD $46.23 AUD
Each
Quantity Required

1 Available Now. Backorder if more than 1.
Pitch
2.094 CP

Teeth (No.)
80

Outside Diameter
53.3
mm

(Equiv. 2.098 in.)
Bore
12.00
mm
Ratchets Ratchets and Pawls - Pitch 2.094 CP 80 - 53.3 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Face Width: 6 mm    Hub Diameter: 35 mm    Hub Projection: 10 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: No Keyway   
Part Number: RT-080-0533-060-120-HH
Ratchets Ratchets and Pawls - Pitch 2.094 CP 80 - 53.3 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
1 Available Now | Further orders can be expected around Fri, Oct 03, 2025
$46.23 AUD
$55.47 AUD $46.23 AUD
Each
Quantity Required

1 Available Now. Backorder if more than 1.
Pitch
2.094 CP

Teeth (No.)
90

Outside Diameter
60
mm

(Equiv. 2.362 in.)
Bore
12.00
mm
Face Width
6
mm
Hub Diameter
40
mm
Ratchets Ratchets and Pawls - Pitch 2.094 CP 90 - 60 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Hub Projection: 10 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: No Keyway   
Part Number: RT-090-0600-060-120-HH
Ratchets Ratchets and Pawls - Pitch 2.094 CP 90 - 60 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
1 Available Now | Further orders can be expected around Fri, Oct 03, 2025
$52.86 AUD
$63.44 AUD $52.86 AUD
Each
Quantity Required

1 Available Now. Backorder if more than 1.
Pitch
2.094 CP

Teeth (No.)
90

Outside Diameter
60
mm

(Equiv. 2.362 in.)
Bore
12.00
mm
Ratchets Ratchets and Pawls - Pitch 2.094 CP 90 - 60 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Face Width: 6 mm    Hub Diameter: 40 mm    Hub Projection: 10 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: No Keyway   
Part Number: RT-090-0600-060-120-HH
Ratchets Ratchets and Pawls - Pitch 2.094 CP 90 - 60 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
1 Available Now | Further orders can be expected around Fri, Oct 03, 2025
$52.86 AUD
$63.44 AUD $52.86 AUD
Each
Quantity Required

1 Available Now. Backorder if more than 1.
Pitch
2.094 CP

Teeth (No.)
100

Outside Diameter
66.6
mm

(Equiv. 2.622 in.)
Bore
12.00
mm
Face Width
6
mm
Hub Diameter
40
mm
Ratchets Ratchets and Pawls - Pitch 2.094 CP 100 - 66.6 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Hub Projection: 10 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: No Keyway   
Part Number: RT-100-0666-060-120-HH
Ratchets Ratchets and Pawls - Pitch 2.094 CP 100 - 66.6 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
1 Available Now | Further orders can be expected around Fri, Oct 03, 2025
$57.77 AUD
$69.33 AUD $57.77 AUD
Each
Quantity Required

1 Available Now. Backorder if more than 1.
Pitch
2.094 CP

Teeth (No.)
100

Outside Diameter
66.6
mm

(Equiv. 2.622 in.)
Bore
12.00
mm
Ratchets Ratchets and Pawls - Pitch 2.094 CP 100 - 66.6 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Face Width: 6 mm    Hub Diameter: 40 mm    Hub Projection: 10 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: No Keyway   
Part Number: RT-100-0666-060-120-HH
Ratchets Ratchets and Pawls - Pitch 2.094 CP 100 - 66.6 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
1 Available Now | Further orders can be expected around Fri, Oct 03, 2025
$57.77 AUD
$69.33 AUD $57.77 AUD
Each
Quantity Required

1 Available Now. Backorder if more than 1.
Pitch
3.140 CP

Teeth (No.)
50

Outside Diameter
50
mm

(Equiv. 1.969 in.)
Bore
Pilot 12
mm
Face Width
12
mm
Hub Diameter
35
mm
Ratchets Ratchets and Pawls - Pitch 3.140 CP 50 - 50 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Hub Projection: 12 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: No Keyway   
Part Number: RT-050-0500-120-120-HH
Ratchets Ratchets and Pawls - Pitch 3.140 CP 50 - 50 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$80.23 AUD
$96.27 AUD $80.23 AUD
Each
Quantity Required

Backorder: Out of Stock.
Pitch
3.140 CP

Teeth (No.)
50

Outside Diameter
50
mm

(Equiv. 1.969 in.)
Bore
Pilot 12
mm
Ratchets Ratchets and Pawls - Pitch 3.140 CP 50 - 50 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Face Width: 12 mm    Hub Diameter: 35 mm    Hub Projection: 12 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: No Keyway   
Part Number: RT-050-0500-120-120-HH
Ratchets Ratchets and Pawls - Pitch 3.140 CP 50 - 50 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$80.23 AUD
$96.27 AUD $80.23 AUD
Each
Quantity Required

Backorder: Out of Stock.
Pitch
3.140 CP

Teeth (No.)
50

Outside Diameter
50
mm

(Equiv. 1.969 in.)
Bore
15.00
mm
Face Width
12
mm
Hub Diameter
35
mm
Ratchets Ratchets and Pawls - Pitch 3.140 CP 50 - 50 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Hub Projection: 12 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: 5.0x2.3 Keway   
Part Number: RT-050-0500-120-150-HH
Ratchets Ratchets and Pawls - Pitch 3.140 CP 50 - 50 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$151.59 AUD
$181.91 AUD $151.59 AUD
Each
Quantity Required

Backorder: Out of Stock.
Pitch
3.140 CP

Teeth (No.)
50

Outside Diameter
50
mm

(Equiv. 1.969 in.)
Bore
15.00
mm
Ratchets Ratchets and Pawls - Pitch 3.140 CP 50 - 50 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Face Width: 12 mm    Hub Diameter: 35 mm    Hub Projection: 12 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: 5.0x2.3 Keway   
Part Number: RT-050-0500-120-150-HH
Ratchets Ratchets and Pawls - Pitch 3.140 CP 50 - 50 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$151.59 AUD
$181.91 AUD $151.59 AUD
Each
Quantity Required

Backorder: Out of Stock.
Pitch
3.140 CP

Teeth (No.)
60

Outside Diameter
60
mm

(Equiv. 2.362 in.)
Bore
20.00
mm
Face Width
12
mm
Hub Diameter
40
mm
Ratchets Ratchets and Pawls - Pitch 3.140 CP 60 - 60 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Hub Projection: 12 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: 6.0x2.8 Keway   
Part Number: RT-060-0600-120-200-HH
Ratchets Ratchets and Pawls - Pitch 3.140 CP 60 - 60 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$164.59 AUD
$197.51 AUD $164.59 AUD
Each
Quantity Required

Backorder: Out of Stock.
Pitch
3.140 CP

Teeth (No.)
60

Outside Diameter
60
mm

(Equiv. 2.362 in.)
Bore
20.00
mm
Ratchets Ratchets and Pawls - Pitch 3.140 CP 60 - 60 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Face Width: 12 mm    Hub Diameter: 40 mm    Hub Projection: 12 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: 6.0x2.8 Keway   
Part Number: RT-060-0600-120-200-HH
Ratchets Ratchets and Pawls - Pitch 3.140 CP 60 - 60 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$164.59 AUD
$197.51 AUD $164.59 AUD
Each
Quantity Required

Backorder: Out of Stock.
Pitch
6.280 CP

Teeth (No.)
60

Outside Diameter
120
mm

(Equiv. 4.724 in.)
Bore
20.00
mm
Face Width
15
mm
Hub Diameter
65
mm
Ratchets Ratchets and Pawls - Pitch 6.280 CP 60 - 120 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Hub Projection: 16 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: 6.0x2.8 Keway   
Part Number: RT-060-0120-150-200-HH
Ratchets Ratchets and Pawls - Pitch 6.280 CP 60 - 120 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$321.68 AUD
$386.02 AUD $321.68 AUD
Each
Quantity Required

Backorder: Out of Stock.
Pitch
6.280 CP

Teeth (No.)
60

Outside Diameter
120
mm

(Equiv. 4.724 in.)
Bore
20.00
mm
Ratchets Ratchets and Pawls - Pitch 6.280 CP 60 - 120 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Face Width: 15 mm    Hub Diameter: 65 mm    Hub Projection: 16 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: 6.0x2.8 Keway   
Part Number: RT-060-0120-150-200-HH
Ratchets Ratchets and Pawls - Pitch 6.280 CP 60 - 120 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$321.68 AUD
$386.02 AUD $321.68 AUD
Each
Quantity Required

Backorder: Out of Stock.
Pitch
6.280 CP

Teeth (No.)
60

Outside Diameter
120
mm

(Equiv. 4.724 in.)
Bore
30.00
mm
Face Width
15
mm
Hub Diameter
65
mm
Ratchets Ratchets and Pawls - Pitch 6.280 CP 60 - 120 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Hub Projection: 16 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: 8.0x3.3 Keway   
Part Number: RT-060-0120-150-300-HH
Ratchets Ratchets and Pawls - Pitch 6.280 CP 60 - 120 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$319.77 AUD
$383.73 AUD $319.77 AUD
Each
Quantity Required

Backorder: Out of Stock.
Pitch
6.280 CP

Teeth (No.)
60

Outside Diameter
120
mm

(Equiv. 4.724 in.)
Bore
30.00
mm
Ratchets Ratchets and Pawls - Pitch 6.280 CP 60 - 120 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Face Width: 15 mm    Hub Diameter: 65 mm    Hub Projection: 16 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: 8.0x3.3 Keway   
Part Number: RT-060-0120-150-300-HH
Ratchets Ratchets and Pawls - Pitch 6.280 CP 60 - 120 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$319.77 AUD
$383.73 AUD $319.77 AUD
Each
Quantity Required

Backorder: Out of Stock.
Pitch
9.420 CP

Teeth (No.)
40

Outside Diameter
120
mm

(Equiv. 4.724 in.)
Bore
Pilot 20
mm
Face Width
15
mm
Hub Diameter
80
mm
Ratchets Ratchets and Pawls - Pitch 9.420 CP 40 - 120 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Hub Projection: 16 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: No Keyway   
Part Number: RT-040-0120-150-200-HH
Ratchets Ratchets and Pawls - Pitch 9.420 CP 40 - 120 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$260.68 AUD
$312.82 AUD $260.68 AUD
Each
Quantity Required

Backorder: Out of Stock.
Pitch
9.420 CP

Teeth (No.)
40

Outside Diameter
120
mm

(Equiv. 4.724 in.)
Bore
Pilot 20
mm
Ratchets Ratchets and Pawls - Pitch 9.420 CP 40 - 120 mm - Carbon Steel - Hardened 48-53 HRC
Material: Carbon Steel - Hardened 48-53 HRC    Face Width: 15 mm    Hub Diameter: 80 mm    Hub Projection: 16 mm    Additional Info: Pawl ordered separately    Teeth Depth: 1 mm    Bore Config: No Keyway   
Part Number: RT-040-0120-150-200-HH
Ratchets Ratchets and Pawls - Pitch 9.420 CP 40 - 120 mm With Hub - Carbon Steel - Hardened 48-53 HRC Ratchet
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$260.68 AUD
$312.82 AUD $260.68 AUD
Each
Quantity Required

Backorder: Out of Stock.