Mounts - Levelling Studded - Elastomer Base OSHA Yellow

Mounts -> Levelling Studded -> Elastomer Base OSHA Yellow

There are 10 products in the sub-categories of Mounts - Levelling Studded - Elastomer Base OSHA Yellow. Browse the Mounts - Levelling Studded - Elastomer Base OSHA Yellow products table.

This product group is not included in our range. Try the full range at Minibearings instead.

Category Details

A selection of Elastomer Base OSHA Yellow Levelling Studded Mounts. Levelling adjusters. Protects general metalworking processes equipment including punch presses, milling machines, lathes, mixers, injection moulding machines, grinders from shock and vibration.

  • An expanded range may be available on special order. Please enquire.
  • Simplifies installation. 63.5mm of neoprene provides controlled deflections under load.
  • High isolation efficiency for vibration and shock forces, and reduction of transmitted sound. Adjustable up to 12.7mm above loaded height by a few turns of the leveling bolt and tightening the checknut.
  • Corrosion resistant outer housing provides high strength. Neoprene elastomer resists oil, grease, ozone and caustics.
  • Zinc plated hardware resists rust. Hex head bolt and locknut finished with mounts. Height dimensions indicate free height of mount under no load.
  • OSHA Yellow Steel Cover over elastomer base

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Mounts - Levelling Studded - Elastomer Base OSHA Yellow category on the Small Parts & Bearings online store.
Thread Size (A) Base Diameter (D) Foot Height (C) Thread Length (F) Base Height (E) Overall Height Indicative
Image
Thread Size (A)
1/4-28 UNF (6.35mm)

Base Diameter (D)
50.8
mm

(Equiv. 2 in.)
Foot Height (C)
25.4
mm

(Equiv. 1 in.)
Thread Length (F)
44.5
mm
Base Height (E)
25.4
mm
Overall Height
69.9
mm
Levelling Studded Mounts - 1/4-28 UNF -6.35mm- 50.8x25.4 mm - Steel
Material: Steel    Load Rating: 45 Kg    Finish: Zinc Plated   
Part Number: MLM-064F-CEB-OSHAY
Levelling Studded Mounts - 1/4-28 UNF - 6.35mm - 50.8x25.4 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$198.59 AUD
$198.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A) Base Diameter (D) Foot Height (C) Thread Length (F) Indicative
Image
Thread Size (A)
1/4-28 UNF (6.35mm)

Base Diameter (D)
50.8
mm

(Equiv. 2 in.)
Foot Height (C)
25.4
mm

(Equiv. 1 in.)
Thread Length (F)
44.5
mm
Levelling Studded Mounts - 1/4-28 UNF -6.35mm- 50.8x25.4 mm - Steel
Material: Steel    Base Height (E): 25.4 mm    Overall Height: 69.9 mm    Load Rating: 45 Kg    Finish: Zinc Plated   
Part Number: MLM-064F-CEB-OSHAY
Levelling Studded Mounts - 1/4-28 UNF - 6.35mm - 50.8x25.4 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$198.59 AUD
$198.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/8-24 UNF (9.53mm)

Base Diameter (D)
79.4
mm

(Equiv. 3.126 in.)
Foot Height (C)
38.1
mm

(Equiv. 1.5 in.)
Thread Length (F)
76.2
mm
Base Height (E)
38.1
mm
Overall Height
114.3
mm
Levelling Studded Mounts - 3/8-24 UNF -9.53mm- 79.4x38.1 mm - Steel
Material: Steel    Load Rating: 135 Kg    Finish: Zinc Plated   
Part Number: MLM-095F-CEB-OSHAY
Levelling Studded Mounts - 3/8-24 UNF - 9.53mm - 79.4x38.1 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$137.05 AUD
$164.45 AUD $137.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/8-24 UNF (9.53mm)

Base Diameter (D)
79.4
mm

(Equiv. 3.126 in.)
Foot Height (C)
38.1
mm

(Equiv. 1.5 in.)
Thread Length (F)
76.2
mm
Levelling Studded Mounts - 3/8-24 UNF -9.53mm- 79.4x38.1 mm - Steel
Material: Steel    Base Height (E): 38.1 mm    Overall Height: 114.3 mm    Load Rating: 135 Kg    Finish: Zinc Plated   
Part Number: MLM-095F-CEB-OSHAY
Levelling Studded Mounts - 3/8-24 UNF - 9.53mm - 79.4x38.1 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$137.05 AUD
$164.45 AUD $137.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/2-13 UNC (12.7mm)

Base Diameter (D)
120.7
mm

(Equiv. 4.752 in.)
Foot Height (C)
38.1
mm

(Equiv. 1.5 in.)
Thread Length (F)
127.0
mm
Base Height (E)
38.1
mm
Overall Height
165.1
mm
Levelling Studded Mounts - 1/2-13 UNC -12.7mm- 120.7x38.1 mm - Steel
Material: Steel    Load Rating: 450 Kg    Finish: Zinc Plated   
Part Number: MLM-127C-127-CEB-OSHAY-121
Levelling Studded Mounts - 1/2-13 UNC - 12.7mm - 120.7x38.1 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$234.95 AUD
$281.95 AUD $234.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/2-13 UNC (12.7mm)

Base Diameter (D)
120.7
mm

(Equiv. 4.752 in.)
Foot Height (C)
38.1
mm

(Equiv. 1.5 in.)
Thread Length (F)
127.0
mm
Levelling Studded Mounts - 1/2-13 UNC -12.7mm- 120.7x38.1 mm - Steel
Material: Steel    Base Height (E): 38.1 mm    Overall Height: 165.1 mm    Load Rating: 450 Kg    Finish: Zinc Plated   
Part Number: MLM-127C-127-CEB-OSHAY-121
Levelling Studded Mounts - 1/2-13 UNC - 12.7mm - 120.7x38.1 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$234.95 AUD
$281.95 AUD $234.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/2-13 UNC (12.7mm)

Base Diameter (D)
120.7
mm

(Equiv. 4.752 in.)
Foot Height (C)
38.1
mm

(Equiv. 1.5 in.)
Thread Length (F)
203.2
mm
Base Height (E)
38.1
mm
Overall Height
241.3
mm
Levelling Studded Mounts - 1/2-13 UNC -12.7mm- 120.7x38.1 mm - Steel
Material: Steel    Load Rating: 450 Kg    Finish: Zinc Plated   
Part Number: MLM-127C-203-CEB-OSHAY
Levelling Studded Mounts - 1/2-13 UNC - 12.7mm - 120.7x38.1 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$236.95 AUD
$284.35 AUD $236.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/2-13 UNC (12.7mm)

Base Diameter (D)
120.7
mm

(Equiv. 4.752 in.)
Foot Height (C)
38.1
mm

(Equiv. 1.5 in.)
Thread Length (F)
203.2
mm
Levelling Studded Mounts - 1/2-13 UNC -12.7mm- 120.7x38.1 mm - Steel
Material: Steel    Base Height (E): 38.1 mm    Overall Height: 241.3 mm    Load Rating: 450 Kg    Finish: Zinc Plated   
Part Number: MLM-127C-203-CEB-OSHAY
Levelling Studded Mounts - 1/2-13 UNC - 12.7mm - 120.7x38.1 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$236.95 AUD
$284.35 AUD $236.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/2-13 UNC (12.7mm)

Base Diameter (D)
160.3
mm

(Equiv. 6.311 in.)
Foot Height (C)
41.3
mm

(Equiv. 1.626 in.)
Thread Length (F)
127.0
mm
Base Height (E)
41.3
mm
Overall Height
168.3
mm
Levelling Studded Mounts - 1/2-13 UNC -12.7mm- 160.3x41.3 mm - Steel
Material: Steel    Load Rating: 1900 Kg    Finish: Zinc Plated   
Part Number: MLM-127C-127-CEB-OSHAY-160
Levelling Studded Mounts - 1/2-13 UNC - 12.7mm - 160.3x41.3 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$349.68 AUD
$419.62 AUD $349.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
1/2-13 UNC (12.7mm)

Base Diameter (D)
160.3
mm

(Equiv. 6.311 in.)
Foot Height (C)
41.3
mm

(Equiv. 1.626 in.)
Thread Length (F)
127.0
mm
Levelling Studded Mounts - 1/2-13 UNC -12.7mm- 160.3x41.3 mm - Steel
Material: Steel    Base Height (E): 41.3 mm    Overall Height: 168.3 mm    Load Rating: 1900 Kg    Finish: Zinc Plated   
Part Number: MLM-127C-127-CEB-OSHAY-160
Levelling Studded Mounts - 1/2-13 UNC - 12.7mm - 160.3x41.3 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$349.68 AUD
$419.62 AUD $349.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/4-10 UNC (19.05mm)

Base Diameter (D)
160.3
mm

(Equiv. 6.311 in.)
Foot Height (C)
41.3
mm

(Equiv. 1.626 in.)
Thread Length (F)
127.0
mm
Base Height (E)
41.3
mm
Overall Height
168.3
mm
Levelling Studded Mounts - 3/4-10 UNC -19.05mm- 160.3x41.3 mm - Steel
Material: Steel    Load Rating: 2000 Kg    Finish: Zinc Plated   
Part Number: MLM-191C-127-CEB-OSHAY-160
Levelling Studded Mounts - 3/4-10 UNC - 19.05mm - 160.3x41.3 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$346.77 AUD
$416.13 AUD $346.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/4-10 UNC (19.05mm)

Base Diameter (D)
160.3
mm

(Equiv. 6.311 in.)
Foot Height (C)
41.3
mm

(Equiv. 1.626 in.)
Thread Length (F)
127.0
mm
Levelling Studded Mounts - 3/4-10 UNC -19.05mm- 160.3x41.3 mm - Steel
Material: Steel    Base Height (E): 41.3 mm    Overall Height: 168.3 mm    Load Rating: 2000 Kg    Finish: Zinc Plated   
Part Number: MLM-191C-127-CEB-OSHAY-160
Levelling Studded Mounts - 3/4-10 UNC - 19.05mm - 160.3x41.3 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$346.77 AUD
$416.13 AUD $346.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/4-10 UNC (19.05mm)

Base Diameter (D)
160.3
mm

(Equiv. 6.311 in.)
Foot Height (C)
41.3
mm

(Equiv. 1.626 in.)
Thread Length (F)
203.2
mm
Base Height (E)
41.3
mm
Overall Height
244.5
mm
Levelling Studded Mounts - 3/4-10 UNC -19.05mm- 160.3x41.3 mm - Steel
Material: Steel    Load Rating: 1900 Kg    Finish: Zinc Plated   
Part Number: MLM-191C-203-CEB-OSHAY-160
Levelling Studded Mounts - 3/4-10 UNC - 19.05mm - 160.3x41.3 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$563.77 AUD
$676.53 AUD $563.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/4-10 UNC (19.05mm)

Base Diameter (D)
160.3
mm

(Equiv. 6.311 in.)
Foot Height (C)
41.3
mm

(Equiv. 1.626 in.)
Thread Length (F)
203.2
mm
Levelling Studded Mounts - 3/4-10 UNC -19.05mm- 160.3x41.3 mm - Steel
Material: Steel    Base Height (E): 41.3 mm    Overall Height: 244.5 mm    Load Rating: 1900 Kg    Finish: Zinc Plated   
Part Number: MLM-191C-203-CEB-OSHAY-160
Levelling Studded Mounts - 3/4-10 UNC - 19.05mm - 160.3x41.3 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$563.77 AUD
$676.53 AUD $563.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/4-10 UNC (19.05mm)

Base Diameter (D)
160.3
mm

(Equiv. 6.311 in.)
Foot Height (C)
41.3
mm

(Equiv. 1.626 in.)
Thread Length (F)
254.0
mm
Base Height (E)
41.3
mm
Overall Height
295.3
mm
Levelling Studded Mounts - 3/4-10 UNC -19.05mm- 160.3x41.3 mm - Steel
Material: Steel    Load Rating: 1900 Kg    Finish: Zinc Plated   
Part Number: MLM-191C-254-CEB-OSHAY
Levelling Studded Mounts - 3/4-10 UNC - 19.05mm - 160.3x41.3 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$600.86 AUD
$721.04 AUD $600.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/4-10 UNC (19.05mm)

Base Diameter (D)
160.3
mm

(Equiv. 6.311 in.)
Foot Height (C)
41.3
mm

(Equiv. 1.626 in.)
Thread Length (F)
254.0
mm
Levelling Studded Mounts - 3/4-10 UNC -19.05mm- 160.3x41.3 mm - Steel
Material: Steel    Base Height (E): 41.3 mm    Overall Height: 295.3 mm    Load Rating: 1900 Kg    Finish: Zinc Plated   
Part Number: MLM-191C-254-CEB-OSHAY
Levelling Studded Mounts - 3/4-10 UNC - 19.05mm - 160.3x41.3 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$600.86 AUD
$721.04 AUD $600.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/4-10 UNC (19.05mm)

Base Diameter (D)
184.2
mm

(Equiv. 7.252 in.)
Foot Height (C)
41.3
mm

(Equiv. 1.626 in.)
Thread Length (F)
127.0
mm
Base Height (E)
41.3
mm
Overall Height
168.3
mm
Levelling Studded Mounts - 3/4-10 UNC -19.05mm- 184.2x41.3 mm - Steel
Material: Steel    Load Rating: 4500 Kg    Finish: Zinc Plated   
Part Number: MLM-191C-127-CEB-OSHAY-184 (20 Pcs)
Levelling Studded Mounts - 3/4-10 UNC - 19.05mm - 184.2x41.3 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$19,342.68 AUD
$19,342.68 AUD
20 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/4-10 UNC (19.05mm)

Base Diameter (D)
184.2
mm

(Equiv. 7.252 in.)
Foot Height (C)
41.3
mm

(Equiv. 1.626 in.)
Thread Length (F)
127.0
mm
Levelling Studded Mounts - 3/4-10 UNC -19.05mm- 184.2x41.3 mm - Steel
Material: Steel    Base Height (E): 41.3 mm    Overall Height: 168.3 mm    Load Rating: 4500 Kg    Finish: Zinc Plated   
Part Number: MLM-191C-127-CEB-OSHAY-184 (20 Pcs)
Levelling Studded Mounts - 3/4-10 UNC - 19.05mm - 184.2x41.3 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$19,342.68 AUD
$19,342.68 AUD
20 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/4-10 UNC (19.05mm)

Base Diameter (D)
184.2
mm

(Equiv. 7.252 in.)
Foot Height (C)
41.3
mm

(Equiv. 1.626 in.)
Thread Length (F)
203.2
mm
Base Height (E)
41.3
mm
Overall Height
244.5
mm
Levelling Studded Mounts - 3/4-10 UNC -19.05mm- 184.2x41.3 mm - Steel
Material: Steel    Load Rating: 4500 Kg    Finish: Zinc Plated   
Part Number: MLM-191C-203-CEB-OSHAY-184 (25 Pcs)
Levelling Studded Mounts - 3/4-10 UNC - 19.05mm - 184.2x41.3 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$22,920.41 AUD
$22,920.41 AUD
25 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Thread Size (A)
3/4-10 UNC (19.05mm)

Base Diameter (D)
184.2
mm

(Equiv. 7.252 in.)
Foot Height (C)
41.3
mm

(Equiv. 1.626 in.)
Thread Length (F)
203.2
mm
Levelling Studded Mounts - 3/4-10 UNC -19.05mm- 184.2x41.3 mm - Steel
Material: Steel    Base Height (E): 41.3 mm    Overall Height: 244.5 mm    Load Rating: 4500 Kg    Finish: Zinc Plated   
Part Number: MLM-191C-203-CEB-OSHAY-184 (25 Pcs)
Levelling Studded Mounts - 3/4-10 UNC - 19.05mm - 184.2x41.3 mm Elastomer Base OSHA Yellow - Steel Mount
Out of Stock | Backorder Now | Orders can be expected around Thu, Oct 16, 2025
$22,920.41 AUD
$22,920.41 AUD
25 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.