Inserts - Self Tapping - For Wood - Slotted Drive - Standard

Inserts -> Self Tapping -> For Wood -> Slotted Drive -> Standard

There are 5 products in the sub-categories of Inserts - Self Tapping - For Wood - Slotted Drive - Standard. Browse the Inserts - Self Tapping - For Wood - Slotted Drive - Standard products table.

This product group is not included in our range. Try the full range at Minibearings instead.

Category Details

A selection of Standard Slotted Drive For Wood Self Tapping Inserts. Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

  • Provides a strong wear and vibration resistant thread.
  • Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately)
  • Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation.
  • A 60o countersink is required for flush mounting.
  • Use with soft plastics, hard and soft wood, particle board

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Inserts - Self Tapping - For Wood - Slotted Drive - Standard category on the Small Parts & Bearings online store.
Internal Thread Rec. Hole Diameter Length (L) Outside Diameter (B) Indicative
Image
Internal Thread
6-32 UNC (3.5mm)

Rec. Hole Diameter
4.60
mm

(Equiv. 0.181 in.)
Length (L)
8.0
mm

(Equiv. 0.315 in.)
Outside Diameter (B)
6.502
mm
Self Tapping Inserts - 6-32 UNC - 3.5mm - 4.6x8 mm For Wood - Brass Insert
Material: Brass    Required Hole Depth: 10.008 mm    Hardwood and Plastic Hole Size: 4.70 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-035C-08-WSL (5 Pcs)
Self Tapping Inserts - 6-32 UNC - 3.5mm - 4.6x8 mm For Wood - Brass Insert
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 22, 2025
$11.14 AUD
$11.14 AUD
5 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Internal Thread Rec. Hole Diameter Length (L) Outside Diameter (B) Indicative
Image
Internal Thread
6-32 UNC (3.5mm)

Rec. Hole Diameter
4.60
mm

(Equiv. 0.181 in.)
Length (L)
8.0
mm

(Equiv. 0.315 in.)
Outside Diameter (B)
6.502
mm
Self Tapping Inserts - 6-32 UNC - 3.5mm - 4.6x8 mm For Wood - Brass Insert
Material: Brass    Required Hole Depth: 10.008 mm    Hardwood and Plastic Hole Size: 4.70 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-035C-08-WSL (5 Pcs)
Self Tapping Inserts - 6-32 UNC - 3.5mm - 4.6x8 mm For Wood - Brass Insert
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 22, 2025
$11.14 AUD
$11.14 AUD
5 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Internal Thread
8-32 UNC (4.17mm)

Rec. Hole Diameter
5.11
mm

(Equiv. 0.201 in.)
Length (L)
10.0
mm

(Equiv. 0.394 in.)
Outside Diameter (B)
7.010
mm
Self Tapping Inserts - 8-32 UNC - 4.17mm - 5.11x10 mm For Wood - Brass Insert
Material: Brass    Required Hole Depth: 13.005 mm    Hardwood and Plastic Hole Size: 5.21 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-042C-10-WSL (5 Pcs)
Self Tapping Inserts - 8-32 UNC - 4.17mm - 5.11x10 mm For Wood - Brass Insert
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 22, 2025
$12.95 AUD
$12.95 AUD
5 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Internal Thread
8-32 UNC (4.17mm)

Rec. Hole Diameter
5.11
mm

(Equiv. 0.201 in.)
Length (L)
10.0
mm

(Equiv. 0.394 in.)
Outside Diameter (B)
7.010
mm
Self Tapping Inserts - 8-32 UNC - 4.17mm - 5.11x10 mm For Wood - Brass Insert
Material: Brass    Required Hole Depth: 13.005 mm    Hardwood and Plastic Hole Size: 5.21 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-042C-10-WSL (5 Pcs)
Self Tapping Inserts - 8-32 UNC - 4.17mm - 5.11x10 mm For Wood - Brass Insert
Out of Stock | Backorder Now | Orders can be expected around Wed, Oct 22, 2025
$12.95 AUD
$12.95 AUD
5 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Internal Thread
1/4-20 UNC (6.35mm)

Rec. Hole Diameter
7.62
mm

(Equiv. 0.3 in.)
Length (L)
14.0
mm

(Equiv. 0.551 in.)
Outside Diameter (B)
10.008
mm
Self Tapping Inserts - 1/4-20 UNC - 6.35mm - 7.62x14 mm For Wood - Brass Insert
Material: Brass    Required Hole Depth: 16.993 mm    Hardwood and Plastic Hole Size: 7.70 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-064C-14-WSL (2 Pcs)
Self Tapping Inserts - 1/4-20 UNC - 6.35mm - 7.62x14 mm For Wood - Brass Insert
4 units (8 pcs) Available Now | Further orders can be expected around Wed, Oct 22, 2025
$6.77 AUD
$8.13 AUD $6.77 AUD
2 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

4 units (8 pcs) Available Now. Backorder if more than 4.
Internal Thread
1/4-20 UNC (6.35mm)

Rec. Hole Diameter
7.62
mm

(Equiv. 0.3 in.)
Length (L)
14.0
mm

(Equiv. 0.551 in.)
Outside Diameter (B)
10.008
mm
Self Tapping Inserts - 1/4-20 UNC - 6.35mm - 7.62x14 mm For Wood - Brass Insert
Material: Brass    Required Hole Depth: 16.993 mm    Hardwood and Plastic Hole Size: 7.70 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-064C-14-WSL (2 Pcs)
Self Tapping Inserts - 1/4-20 UNC - 6.35mm - 7.62x14 mm For Wood - Brass Insert
4 units (8 pcs) Available Now | Further orders can be expected around Wed, Oct 22, 2025
$6.77 AUD
$8.13 AUD $6.77 AUD
2 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

4 units (8 pcs) Available Now. Backorder if more than 4.
Internal Thread
3/8-16 UNC (9.53mm)

Rec. Hole Diameter
12.40
mm

(Equiv. 0.488 in.)
Length (L)
23.0
mm

(Equiv. 0.906 in.)
Outside Diameter (B)
16.002
mm
Self Tapping Inserts - 3/8-16 UNC - 9.53mm - 12.4x23 mm For Wood - Brass Insert
Material: Brass    Required Hole Depth: 26.010 mm    Hardwood and Plastic Hole Size: 12.60 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-095C-23-WSL
Self Tapping Inserts - 3/8-16 UNC - 9.53mm - 12.4x23 mm For Wood - Brass Insert
5 Available Now | Further orders can be expected around Wed, Oct 22, 2025
$10.59 AUD
$12.71 AUD $10.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

5 Available Now. Backorder if more than 5.
Internal Thread
3/8-16 UNC (9.53mm)

Rec. Hole Diameter
12.40
mm

(Equiv. 0.488 in.)
Length (L)
23.0
mm

(Equiv. 0.906 in.)
Outside Diameter (B)
16.002
mm
Self Tapping Inserts - 3/8-16 UNC - 9.53mm - 12.4x23 mm For Wood - Brass Insert
Material: Brass    Required Hole Depth: 26.010 mm    Hardwood and Plastic Hole Size: 12.60 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-095C-23-WSL
Self Tapping Inserts - 3/8-16 UNC - 9.53mm - 12.4x23 mm For Wood - Brass Insert
5 Available Now | Further orders can be expected around Wed, Oct 22, 2025
$10.59 AUD
$12.71 AUD $10.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

5 Available Now. Backorder if more than 5.
Internal Thread
M6 (6x1mm)

Rec. Hole Diameter
8.0
mm

(Equiv. 0.315 in.)
Length (L)
12.7
mm

(Equiv. 0.5 in.)
Outside Diameter (B)
11.5
mm
Self Tapping Inserts - M6 - 6x1mm - 8x12.7 mm For Wood - Stainless Steel Bearing
Material: Stainless Steel    Required Hole Depth: 14.9 mm    Hardwood and Plastic Hole Size: 9.92 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-040M-13-WSL
Self Tapping Inserts - M6 - 6x1mm - 8x12.7 mm For Wood - Stainless Steel Bearing
50 Available Now | Further orders can be expected around Fri, Nov 07, 2025
$16.50 AUD
$19.80 AUD $16.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

50 Available Now. Backorder if more than 50.
Internal Thread
M6 (6x1mm)

Rec. Hole Diameter
8.0
mm

(Equiv. 0.315 in.)
Length (L)
12.7
mm

(Equiv. 0.5 in.)
Outside Diameter (B)
11.5
mm
Self Tapping Inserts - M6 - 6x1mm - 8x12.7 mm For Wood - Stainless Steel Bearing
Material: Stainless Steel    Required Hole Depth: 14.9 mm    Hardwood and Plastic Hole Size: 9.92 mm    Material to be used in: Hard and Soft Woods, Particle board, Soft Plastics   
Part Number: IN-TP-040M-13-WSL
Self Tapping Inserts - M6 - 6x1mm - 8x12.7 mm For Wood - Stainless Steel Bearing
50 Available Now | Further orders can be expected around Fri, Nov 07, 2025
$16.50 AUD
$19.80 AUD $16.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

50 Available Now. Backorder if more than 50.