Housing and Bearing Assembly - Pillow Block - Thermoplastic and Stainless

Housing and Bearing Assembly -> Pillow Block -> Thermoplastic and Stainless

There are 17 products in the sub-categories of Housing and Bearing Assembly - Pillow Block - Thermoplastic and Stainless. Browse the Housing and Bearing Assembly - Pillow Block - Thermoplastic and Stainless products table.

Category Details

A selection of Thermoplastic and Stainless Pillow Block Housing and Bearing Assembly. Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

  • Bearing housing assemblies combine matching parts already assembled. Bearings in this range refer to either ball bearings or plain bearings. Refer to the listings for each type.
  • Pillo block type are a pedestal mounted with two bolt holes through the base.
  • Food grade.
  • Thermoplastic housings are off-white and are made from glass reinforced PBT resin.
  • Excellent mechanical, thermal and electrical properties.
  • Operational temperature -20 to +100 oC
  • Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Housing and Bearing Assembly - Pillow Block - Thermoplastic and Stainless category on the Small Parts & Bearings online store.
Inside Diameter Centre Height (A) Length (B) Width (C) Foot Height (D) Bolt Centres (E) Indicative
Image
Pillow Block Housing and Bearing Assembly - 12.7x33.338x127 mm Thermoplastic and Stainless
Inside Diameter
12.700
mm
Centre Height (A)
33.338
mm
Length (B)
127.000
mm
Width (C)
38.100
mm
Foot Height (D)
14.275
mm
Bolt Centres (E)
95.250
mm
Pillow Block Housing Assembly - 12.7x33.338x127 mm
Bolt Hole Size (G): 14.275 mm    Height (H): 65.881 mm    K: 12.700 mm    L: 18.301 mm   
Part Number: IP-124RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$350.05 AUD
$350.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Inside Diameter Centre Height (A) Length (B) Width (C) Indicative
Image
Pillow Block Housing and Bearing Assembly - 12.7x33.338x127 mm Thermoplastic and Stainless
Inside Diameter
12.700
mm
Centre Height (A)
33.338
mm
Length (B)
127.000
mm
Width (C)
38.100
mm
Pillow Block Housing Assembly - 12.7x33.338x127 mm
Foot Height (D): 14.275 mm    Bolt Centres (E): 95.250 mm    Bolt Hole Size (G): 14.275 mm    Height (H): 65.881 mm    K: 12.700 mm    L: 18.301 mm   
Part Number: IP-124RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$350.05 AUD
$350.05 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 15.875x33.3x127 mm Thermoplastic and Stainless
Inside Diameter
15.875
mm
Centre Height (A)
33.300
mm
Length (B)
127.000
mm
Width (C)
38.100
mm
Foot Height (D)
14.275
mm
Bolt Centres (E)
95.250
mm
Pillow Block Housing Assembly - 15.875x33.3x127 mm
Bolt Hole Size (G): 14.275 mm    Height (H): 65.881 mm    K: 12.700 mm    L: 18.301 mm   
Part Number: IP-125RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$307.59 AUD
$369.11 AUD $307.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 15.875x33.3x127 mm Thermoplastic and Stainless
Inside Diameter
15.875
mm
Centre Height (A)
33.300
mm
Length (B)
127.000
mm
Width (C)
38.100
mm
Pillow Block Housing Assembly - 15.875x33.3x127 mm
Foot Height (D): 14.275 mm    Bolt Centres (E): 95.250 mm    Bolt Hole Size (G): 14.275 mm    Height (H): 65.881 mm    K: 12.700 mm    L: 18.301 mm   
Part Number: IP-125RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$307.59 AUD
$369.11 AUD $307.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 19.05x33.338x127 mm Thermoplastic and Stainless
Inside Diameter
19.050
mm
Centre Height (A)
33.338
mm
Length (B)
127.000
mm
Width (C)
38.100
mm
Foot Height (D)
14.275
mm
Bolt Centres (E)
95.250
mm
Pillow Block Housing Assembly - 19.05x33.338x127 mm
Bolt Hole Size (G): 14.275 mm    Height (H): 65.881 mm    K: 12.700 mm    L: 18.301 mm   
Part Number: IP-126RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$307.59 AUD
$369.11 AUD $307.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 19.05x33.338x127 mm Thermoplastic and Stainless
Inside Diameter
19.050
mm
Centre Height (A)
33.338
mm
Length (B)
127.000
mm
Width (C)
38.100
mm
Pillow Block Housing Assembly - 19.05x33.338x127 mm
Foot Height (D): 14.275 mm    Bolt Centres (E): 95.250 mm    Bolt Hole Size (G): 14.275 mm    Height (H): 65.881 mm    K: 12.700 mm    L: 18.301 mm   
Part Number: IP-126RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$307.59 AUD
$369.11 AUD $307.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 20x33.3x127 mm Thermoplastic and Stainless
Inside Diameter
20.000
mm
Centre Height (A)
33.300
mm
Length (B)
127.000
mm
Width (C)
38.000
mm
Foot Height (D)
14.000
mm
Bolt Centres (E)
95.000
mm
Pillow Block Housing Assembly - 20x33.3x127 mm
Bolt Hole Size (G): 14.000 mm    Height (H): 14.000 mm    K: 14.000 mm    L: 18.300 mm   
Part Number: IP-127RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$310.50 AUD
$372.60 AUD $310.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 20x33.3x127 mm Thermoplastic and Stainless
Inside Diameter
20.000
mm
Centre Height (A)
33.300
mm
Length (B)
127.000
mm
Width (C)
38.000
mm
Pillow Block Housing Assembly - 20x33.3x127 mm
Foot Height (D): 14.000 mm    Bolt Centres (E): 95.000 mm    Bolt Hole Size (G): 14.000 mm    Height (H): 14.000 mm    K: 14.000 mm    L: 18.300 mm   
Part Number: IP-127RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$310.50 AUD
$372.60 AUD $310.50 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 22.225x36.513x139.7 mm Thermoplastic and Stainless
Inside Diameter
22.225
mm
Centre Height (A)
36.513
mm
Length (B)
139.700
mm
Width (C)
38.100
mm
Foot Height (D)
14.275
mm
Bolt Centres (E)
104.775
mm
Pillow Block Housing Assembly - 22.225x36.513x139.7 mm
Bolt Hole Size (G): 14.275 mm    Height (H): 65.881 mm    K: 14.300 mm    L: 19.700 mm   
Part Number: IP-128RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$329.23 AUD
$395.07 AUD $329.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 22.225x36.513x139.7 mm Thermoplastic and Stainless
Inside Diameter
22.225
mm
Centre Height (A)
36.513
mm
Length (B)
139.700
mm
Width (C)
38.100
mm
Pillow Block Housing Assembly - 22.225x36.513x139.7 mm
Foot Height (D): 14.275 mm    Bolt Centres (E): 104.775 mm    Bolt Hole Size (G): 14.275 mm    Height (H): 65.881 mm    K: 14.300 mm    L: 19.700 mm   
Part Number: IP-128RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$329.23 AUD
$395.07 AUD $329.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 25x36.5x140 mm Thermoplastic and Stainless
Inside Diameter
25.000
mm
Centre Height (A)
36.500
mm
Length (B)
140.000
mm
Width (C)
38.000
mm
Foot Height (D)
14.000
mm
Bolt Centres (E)
105.000
mm
Pillow Block Housing Assembly - 25x36.5x140 mm
Bolt Hole Size (G): 38.000 mm    Height (H): 71.000 mm    K: 14.300 mm    L: 19.700 mm   
Part Number: IP-129RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$345.86 AUD
$415.04 AUD $345.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 25x36.5x140 mm Thermoplastic and Stainless
Inside Diameter
25.000
mm
Centre Height (A)
36.500
mm
Length (B)
140.000
mm
Width (C)
38.000
mm
Pillow Block Housing Assembly - 25x36.5x140 mm
Foot Height (D): 14.000 mm    Bolt Centres (E): 105.000 mm    Bolt Hole Size (G): 38.000 mm    Height (H): 71.000 mm    K: 14.300 mm    L: 19.700 mm   
Part Number: IP-129RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$345.86 AUD
$415.04 AUD $345.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 25.4x36.513x139.7 mm Thermoplastic and Stainless
Inside Diameter
25.400
mm
Centre Height (A)
36.513
mm
Length (B)
139.700
mm
Width (C)
38.100
mm
Foot Height (D)
14.275
mm
Bolt Centres (E)
104.775
mm
Pillow Block Housing Assembly - 25.4x36.513x139.7 mm
Bolt Hole Size (G): 18.256 mm    Height (H): 65.881 mm    K: 14.300 mm    L: 19.700 mm   
Part Number: IP-130RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$336.86 AUD
$404.24 AUD $336.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 25.4x36.513x139.7 mm Thermoplastic and Stainless
Inside Diameter
25.400
mm
Centre Height (A)
36.513
mm
Length (B)
139.700
mm
Width (C)
38.100
mm
Pillow Block Housing Assembly - 25.4x36.513x139.7 mm
Foot Height (D): 14.275 mm    Bolt Centres (E): 104.775 mm    Bolt Hole Size (G): 18.256 mm    Height (H): 65.881 mm    K: 14.300 mm    L: 19.700 mm   
Part Number: IP-130RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$336.86 AUD
$404.24 AUD $336.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 28.575x42.863x162.719 mm Thermoplastic and Stainless
Inside Diameter
28.575
mm
Centre Height (A)
42.863
mm
Length (B)
162.719
mm
Width (C)
46.038
mm
Foot Height (D)
26.975
mm
Bolt Centres (E)
119.063
mm
Pillow Block Housing Assembly - 28.575x42.863x162.719 mm
Bolt Hole Size (G): 18.256 mm    Height (H): 83.741 mm    K: 22.200 mm    L: 22.200 mm   
Part Number: IP-131RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$401.95 AUD
$482.35 AUD $401.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 28.575x42.863x162.719 mm Thermoplastic and Stainless
Inside Diameter
28.575
mm
Centre Height (A)
42.863
mm
Length (B)
162.719
mm
Width (C)
46.038
mm
Pillow Block Housing Assembly - 28.575x42.863x162.719 mm
Foot Height (D): 26.975 mm    Bolt Centres (E): 119.063 mm    Bolt Hole Size (G): 18.256 mm    Height (H): 83.741 mm    K: 22.200 mm    L: 22.200 mm   
Part Number: IP-131RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$401.95 AUD
$482.35 AUD $401.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 30x42.9x163 mm Thermoplastic and Stainless
Inside Diameter
30.000
mm
Centre Height (A)
42.900
mm
Length (B)
163.000
mm
Width (C)
46.000
mm
Foot Height (D)
18.000
mm
Bolt Centres (E)
119.000
mm
Pillow Block Housing Assembly - 30x42.9x163 mm
Bolt Hole Size (G): 18.256 mm    Height (H): 84.000 mm    K: 22.200 mm    L: 22.200 mm   
Part Number: IP-132RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$412.95 AUD
$495.55 AUD $412.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 30x42.9x163 mm Thermoplastic and Stainless
Inside Diameter
30.000
mm
Centre Height (A)
42.900
mm
Length (B)
163.000
mm
Width (C)
46.000
mm
Pillow Block Housing Assembly - 30x42.9x163 mm
Foot Height (D): 18.000 mm    Bolt Centres (E): 119.000 mm    Bolt Hole Size (G): 18.256 mm    Height (H): 84.000 mm    K: 22.200 mm    L: 22.200 mm   
Part Number: IP-132RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$412.95 AUD
$495.55 AUD $412.95 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 30.163x42.863x162.719 mm Thermoplastic and Stainless
Inside Diameter
30.163
mm
Centre Height (A)
42.863
mm
Length (B)
162.719
mm
Width (C)
46.038
mm
Foot Height (D)
26.975
mm
Bolt Centres (E)
119.063
mm
Pillow Block Housing Assembly - 30.163x42.863x162.719 mm
Bolt Hole Size (G): 18.256 mm    Height (H): 83.741 mm    K: 22.200 mm    L: 22.200 mm   
Part Number: IP-133RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$411.14 AUD
$493.36 AUD $411.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 30.163x42.863x162.719 mm Thermoplastic and Stainless
Inside Diameter
30.163
mm
Centre Height (A)
42.863
mm
Length (B)
162.719
mm
Width (C)
46.038
mm
Pillow Block Housing Assembly - 30.163x42.863x162.719 mm
Foot Height (D): 26.975 mm    Bolt Centres (E): 119.063 mm    Bolt Hole Size (G): 18.256 mm    Height (H): 83.741 mm    K: 22.200 mm    L: 22.200 mm   
Part Number: IP-133RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$411.14 AUD
$493.36 AUD $411.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 31.75x42.863x162.719 mm Thermoplastic and Stainless
Inside Diameter
31.75
mm
Centre Height (A)
42.863
mm
Length (B)
162.719
mm
Width (C)
46.038
mm
Foot Height (D)
26.975
mm
Bolt Centres (E)
119.063
mm
Pillow Block Housing Assembly - 31.75 S 42.863x162.719 mm
Bolt Hole Size (G): 18.256 mm    Height (H): 83.741 mm    K: 22.200 mm    L: 22.200 mm   
Part Number: IP-134RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$411.14 AUD
$493.36 AUD $411.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 31.75x42.863x162.719 mm Thermoplastic and Stainless
Inside Diameter
31.75
mm
Centre Height (A)
42.863
mm
Length (B)
162.719
mm
Width (C)
46.038
mm
Pillow Block Housing Assembly - 31.75 S 42.863x162.719 mm
Foot Height (D): 26.975 mm    Bolt Centres (E): 119.063 mm    Bolt Hole Size (G): 18.256 mm    Height (H): 83.741 mm    K: 22.200 mm    L: 22.200 mm   
Part Number: IP-134RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$411.14 AUD
$493.36 AUD $411.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 31.75x47.625x168.275 mm Thermoplastic and Stainless
Inside Diameter
31.750
mm
Centre Height (A)
47.625
mm
Length (B)
168.275
mm
Width (C)
48.419
mm
Foot Height (D)
26.975
mm
Bolt Centres (E)
127.000
mm
Pillow Block Housing Assembly - 31.75x47.625x168.275 mm
Bolt Hole Size (G): 18.256 mm    Height (H): 93.663 mm    K: 17.501 mm    L: 25.400 mm   
Part Number: IP-135RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$481.86 AUD
$578.24 AUD $481.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 31.75x47.625x168.275 mm Thermoplastic and Stainless
Inside Diameter
31.750
mm
Centre Height (A)
47.625
mm
Length (B)
168.275
mm
Width (C)
48.419
mm
Pillow Block Housing Assembly - 31.75x47.625x168.275 mm
Foot Height (D): 26.975 mm    Bolt Centres (E): 127.000 mm    Bolt Hole Size (G): 18.256 mm    Height (H): 93.663 mm    K: 17.501 mm    L: 25.400 mm   
Part Number: IP-135RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$481.86 AUD
$578.24 AUD $481.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 34.925x47.625x168.275 mm Thermoplastic and Stainless
Inside Diameter
34.925
mm
Centre Height (A)
47.625
mm
Length (B)
168.275
mm
Width (C)
48.419
mm
Foot Height (D)
26.975
mm
Bolt Centres (E)
127.000
mm
Pillow Block Housing Assembly - 34.925x47.625x168.275 mm
Bolt Hole Size (G): 18.256 mm    Height (H): 93.663 mm    K: 17.501 mm    L: 25.400 mm   
Part Number: IP-137RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$481.86 AUD
$578.24 AUD $481.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 34.925x47.625x168.275 mm Thermoplastic and Stainless
Inside Diameter
34.925
mm
Centre Height (A)
47.625
mm
Length (B)
168.275
mm
Width (C)
48.419
mm
Pillow Block Housing Assembly - 34.925x47.625x168.275 mm
Foot Height (D): 26.975 mm    Bolt Centres (E): 127.000 mm    Bolt Hole Size (G): 18.256 mm    Height (H): 93.663 mm    K: 17.501 mm    L: 25.400 mm   
Part Number: IP-137RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$481.86 AUD
$578.24 AUD $481.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 35x47.6x168 mm Thermoplastic and Stainless
Inside Diameter
35.000
mm
Centre Height (A)
47.600
mm
Length (B)
168.000
mm
Width (C)
48.000
mm
Foot Height (D)
18.000
mm
Bolt Centres (E)
127.000
mm
Pillow Block Housing Assembly - 35x47.6x168 mm
Bolt Hole Size (G): 18.000 mm    Height (H): 94.000 mm    K: 17.500 mm    L: 25.400 mm   
Part Number: IP-138RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$496.23 AUD
$595.47 AUD $496.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 35x47.6x168 mm Thermoplastic and Stainless
Inside Diameter
35.000
mm
Centre Height (A)
47.600
mm
Length (B)
168.000
mm
Width (C)
48.000
mm
Pillow Block Housing Assembly - 35x47.6x168 mm
Foot Height (D): 18.000 mm    Bolt Centres (E): 127.000 mm    Bolt Hole Size (G): 18.000 mm    Height (H): 94.000 mm    K: 17.500 mm    L: 25.400 mm   
Part Number: IP-138RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$496.23 AUD
$595.47 AUD $496.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 36.513x47.625x168.275 mm Thermoplastic and Stainless
Inside Diameter
36.513
mm
Centre Height (A)
47.625
mm
Length (B)
168.275
mm
Width (C)
48.419
mm
Foot Height (D)
26.975
mm
Bolt Centres (E)
127.000
mm
Pillow Block Housing Assembly - 36.513x47.625x168.275 mm
Bolt Hole Size (G): 18.256 mm    Height (H): 93.663 mm    K: 17.501 mm    L: 25.400 mm   
Part Number: IP-139RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$481.86 AUD
$578.24 AUD $481.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 36.513x47.625x168.275 mm Thermoplastic and Stainless
Inside Diameter
36.513
mm
Centre Height (A)
47.625
mm
Length (B)
168.275
mm
Width (C)
48.419
mm
Pillow Block Housing Assembly - 36.513x47.625x168.275 mm
Foot Height (D): 26.975 mm    Bolt Centres (E): 127.000 mm    Bolt Hole Size (G): 18.256 mm    Height (H): 93.663 mm    K: 17.501 mm    L: 25.400 mm   
Part Number: IP-139RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$481.86 AUD
$578.24 AUD $481.86 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 38.1x49.213x184.15 mm Thermoplastic and Stainless
Inside Diameter
38.100
mm
Centre Height (A)
49.213
mm
Length (B)
184.150
mm
Width (C)
53.975
mm
Foot Height (D)
54.762
mm
Bolt Centres (E)
138.100
mm
Pillow Block Housing Assembly - 38.1x49.213x184.15 mm
Bolt Hole Size (G): 18.256 mm    Height (H): 99.219 mm    K: 18.999 mm    L: 30.201 mm   
Part Number: IP-140RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$555.23 AUD
$666.27 AUD $555.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 38.1x49.213x184.15 mm Thermoplastic and Stainless
Inside Diameter
38.100
mm
Centre Height (A)
49.213
mm
Length (B)
184.150
mm
Width (C)
53.975
mm
Pillow Block Housing Assembly - 38.1x49.213x184.15 mm
Foot Height (D): 54.762 mm    Bolt Centres (E): 138.100 mm    Bolt Hole Size (G): 18.256 mm    Height (H): 99.219 mm    K: 18.999 mm    L: 30.201 mm   
Part Number: IP-140RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$555.23 AUD
$666.27 AUD $555.23 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 40x49.2x184 mm Thermoplastic and Stainless
Inside Diameter
40.000
mm
Centre Height (A)
49.200
mm
Length (B)
184.000
mm
Width (C)
54.000
mm
Foot Height (D)
20.000
mm
Bolt Centres (E)
137.000
mm
Pillow Block Housing Assembly - 40x49.2x184 mm
Bolt Hole Size (G): 18.000 mm    Height (H): 99.000 mm    K: 19.000 mm    L: 30.200 mm   
Part Number: IP-141RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$586.59 AUD
$703.91 AUD $586.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Pillow Block Housing and Bearing Assembly - 40x49.2x184 mm Thermoplastic and Stainless
Inside Diameter
40.000
mm
Centre Height (A)
49.200
mm
Length (B)
184.000
mm
Width (C)
54.000
mm
Pillow Block Housing Assembly - 40x49.2x184 mm
Foot Height (D): 20.000 mm    Bolt Centres (E): 137.000 mm    Bolt Hole Size (G): 18.000 mm    Height (H): 99.000 mm    K: 19.000 mm    L: 30.200 mm   
Part Number: IP-141RS (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Sat, Jun 27, 2026
$586.59 AUD
$703.91 AUD $586.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.