Gears - Worm - 32DP

Gears -> Worm -> 32DP

There are 11 products in the sub-categories of Gears - Worm - 32DP. Browse the Gears - Worm - 32DP products table.

Category Details

A selection of 32DP Worm Gears. This is the main category in this series

  • Worms and Gears must be chosen from the same pitch, direction and lead angle match. DP is Diametrical Pitch, which is an imperial standard.
  • A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.
  • If there is no matching worm for a stocked gear, please contact us for a special procurement. An expanded range may be available on special order. Please enquire.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Gears - Worm - 32DP category on the Small Parts & Bearings online store.
Pitch Teeth Lead Angle Direction Bore (B) Overall Length (l) Indicative
Image
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
4.762
Overall Length (l)
12.700
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Carbon Steel Unhardened
Material: Carbon Steel Unhardened    Pitch Diameter (C): 11.125 mm    Face Width (fw): 12.700 mm    Bore Type: Finished    Locking Type: No Hub   
Part Number: WM1R32-1-013NP048-CS
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Carbon Steel Unhardened
Contact Us | Special Order Only - Please contact us if you need a large quantity
Pitch Teeth Lead Angle Direction Indicative
Image
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Carbon Steel Unhardened
Material: Carbon Steel Unhardened    Bore (B): 4.762    Overall Length (l): 12.700    Pitch Diameter (C): 11.125 mm    Face Width (fw): 12.700 mm    Bore Type: Finished    Locking Type: No Hub   
Part Number: WM1R32-1-013NP048-CS
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Carbon Steel Unhardened
Contact Us | Special Order Only - Please contact us if you need a large quantity | Orders can be expected around Tue, Jul 11, 2028
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
4.762
Overall Length (l)
17.463
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Carbon Steel Unhardened
Material: Carbon Steel Unhardened    Pitch Diameter (C): 11.125 mm    Face Width (fw): 12.700 mm    Bore Type: Finished    Hub Diameter (Dh): 8.890 mm    Locking Type: No. 47 Hole   
Part Number: WM1R32-1-017HD048-CS
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Carbon Steel Unhardened
Contact Us | Special Order Only - Please contact us if you need a large quantity
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Carbon Steel Unhardened
Material: Carbon Steel Unhardened    Bore (B): 4.762    Overall Length (l): 17.463    Pitch Diameter (C): 11.125 mm    Face Width (fw): 12.700 mm    Bore Type: Finished    Hub Diameter (Dh): 8.890 mm    Locking Type: No. 47 Hole   
Part Number: WM1R32-1-017HD048-CS
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Carbon Steel Unhardened
Contact Us | Special Order Only - Please contact us if you need a large quantity | Orders can be expected around Tue, Jul 11, 2028
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
4.762
Overall Length (l)
21.034
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Acetal
Material: Acetal    Pitch Diameter (C): 11.125 mm    Face Width (fw): 16.272 mm    Bore Type: Finished    Hub Diameter (Dh): 8.128 mm    Locking Type: No Locking   
Part Number: WM1R32-1-021HP048-NY
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Acetal
Contact Us | Special Order Only - Please contact us if you need a large quantity
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Acetal
Material: Acetal    Bore (B): 4.762    Overall Length (l): 21.034    Pitch Diameter (C): 11.125 mm    Face Width (fw): 16.272 mm    Bore Type: Finished    Hub Diameter (Dh): 8.128 mm    Locking Type: No Locking   
Part Number: WM1R32-1-021HP048-NY
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Acetal
Contact Us | Special Order Only - Please contact us if you need a large quantity | Orders can be expected around Tue, Jul 11, 2028
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
4.762
Overall Length (l)
22.225
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Carbon Steel Unhardened
Material: Carbon Steel Unhardened    Pitch Diameter (C): 11.125 mm    Face Width (fw): 17.462 mm    Bore Type: Finished    Hub Diameter (Dh): 8.128 mm    Locking Type: No. 47 Hole   
Part Number: WM1R32-1-022HD048-CS
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Carbon Steel Unhardened
Contact Us | Special Order Only - Please contact us if you need a large quantity
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Carbon Steel Unhardened
Material: Carbon Steel Unhardened    Bore (B): 4.762    Overall Length (l): 22.225    Pitch Diameter (C): 11.125 mm    Face Width (fw): 17.462 mm    Bore Type: Finished    Hub Diameter (Dh): 8.128 mm    Locking Type: No. 47 Hole   
Part Number: WM1R32-1-022HD048-CS
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Carbon Steel Unhardened
Contact Us | Special Order Only - Please contact us if you need a large quantity | Orders can be expected around Tue, Jul 11, 2028
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
5.556
Overall Length (l)
22.225
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Carbon Steel Hardened and Polished
Material: Carbon Steel Hardened and Polished    Pitch Diameter (C): 11.125 mm    Face Width (fw): 17.462 mm    Bore Type: Finished    Hub Diameter (Dh): 8.128 mm    Locking Type: No. 47 Hole   
Part Number: WM1R32-1-022HD056-CSHDP
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Carbon Steel Hardened and Polished
Contact Us | Special Order Only - Please contact us if you need a large quantity
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Carbon Steel Hardened and Polished
Material: Carbon Steel Hardened and Polished    Bore (B): 5.556    Overall Length (l): 22.225    Pitch Diameter (C): 11.125 mm    Face Width (fw): 17.462 mm    Bore Type: Finished    Hub Diameter (Dh): 8.128 mm    Locking Type: No. 47 Hole   
Part Number: WM1R32-1-022HD056-CSHDP
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Carbon Steel Hardened and Polished
Contact Us | Special Order Only - Please contact us if you need a large quantity | Orders can be expected around Tue, Jul 11, 2028
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
5.556
Overall Length (l)
22.225
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Carbon Steel Hardened and Ground
Material: Carbon Steel Hardened and Ground    Pitch Diameter (C): 11.125 mm    Face Width (fw): 17.462 mm    Bore Type: Finished    Hub Diameter (Dh): 8.890 mm    Locking Type: No. 47 Hole   
Part Number: WM1R32-1-022HD056-CSHDG
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Carbon Steel Hardened and Ground
Contact Us | Special Order Only - Please contact us if you need a large quantity
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Carbon Steel Hardened and Ground
Material: Carbon Steel Hardened and Ground    Bore (B): 5.556    Overall Length (l): 22.225    Pitch Diameter (C): 11.125 mm    Face Width (fw): 17.462 mm    Bore Type: Finished    Hub Diameter (Dh): 8.890 mm    Locking Type: No. 47 Hole   
Part Number: WM1R32-1-022HD056-CSHDG
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Carbon Steel Hardened and Ground
Contact Us | Special Order Only - Please contact us if you need a large quantity | Orders can be expected around Tue, Jul 11, 2028
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
5.556
Overall Length (l)
22.225
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Carbon Steel Hardened and Polished
Material: Carbon Steel Hardened and Polished    Pitch Diameter (C): 11.125 mm    Face Width (fw): 17.462 mm    Bore Type: Finished    Hub Diameter (Dh): 8.890 mm    Locking Type: No. 47 Hole   
Part Number: WM1R32-1-022HD056-CSHDPA
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Carbon Steel Hardened and Polished
Contact Us | Special Order Only - Please contact us if you need a large quantity
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Carbon Steel Hardened and Polished
Material: Carbon Steel Hardened and Polished    Bore (B): 5.556    Overall Length (l): 22.225    Pitch Diameter (C): 11.125 mm    Face Width (fw): 17.462 mm    Bore Type: Finished    Hub Diameter (Dh): 8.890 mm    Locking Type: No. 47 Hole   
Part Number: WM1R32-1-022HD056-CSHDPA
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Carbon Steel Hardened and Polished
Contact Us | Special Order Only - Please contact us if you need a large quantity | Orders can be expected around Tue, Jul 11, 2028
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
6.350
Overall Length (l)
17.463
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Carbon Steel Hardened and Polished
Material: Carbon Steel Hardened and Polished    Pitch Diameter (C): 11.125 mm    Face Width (fw): 12.700 mm    Bore Type: Finished    Hub Diameter (Dh): 8.890 mm    Locking Type: No. 47 Hole   
Part Number: WM1R32-1-017HD064-CSHDP
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Carbon Steel Hardened and Polished
Contact Us | Special Order Only - Please contact us if you need a large quantity
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Carbon Steel Hardened and Polished
Material: Carbon Steel Hardened and Polished    Bore (B): 6.350    Overall Length (l): 17.463    Pitch Diameter (C): 11.125 mm    Face Width (fw): 12.700 mm    Bore Type: Finished    Hub Diameter (Dh): 8.890 mm    Locking Type: No. 47 Hole   
Part Number: WM1R32-1-017HD064-CSHDP
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Carbon Steel Hardened and Polished
Contact Us | Special Order Only - Please contact us if you need a large quantity | Orders can be expected around Tue, Jul 11, 2028
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
6.350
Overall Length (l)
17.463
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Carbon Steel Unhardened
Material: Carbon Steel Unhardened    Pitch Diameter (C): 11.125 mm    Face Width (fw): 12.700 mm    Bore Type: Finished    Hub Diameter (Dh): 8.890 mm    Locking Type: No. 47 Hole   
Deleted Item. Available while stocks last.
Part Number: WM1R32-1-017HD064-CS
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Carbon Steel Unhardened
Contact Us | Special Order Only - Please contact us if you need a large quantity
Pitch
32DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 32DP Worm - 1 Start - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Carbon Steel Unhardened
Material: Carbon Steel Unhardened    Bore (B): 6.350    Overall Length (l): 17.463    Pitch Diameter (C): 11.125 mm    Face Width (fw): 12.700 mm    Bore Type: Finished    Hub Diameter (Dh): 8.890 mm    Locking Type: No. 47 Hole   
Deleted Item. Available while stocks last.
Part Number: WM1R32-1-017HD064-CS
Worm Gears - Pitch 32DP - Worm - 1 Start tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Carbon Steel Unhardened
Contact Us | Special Order Only - Please contact us if you need a large quantity | Orders can be expected around Tue, Jul 11, 2028
Pitch
32DP

Teeth
40

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
7.938
Overall Length (l)
12.700
Worm Gears - Pitch 32DP 40 - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Acetal
Material: Acetal    Pitch Diameter (C): 31.75 mm    Face Width (fw): 4.762 mm    Bore Type: Finished    Hub Diameter (Dh): 15.87 Brass Insert mm    Locking Type: Set Screw   
Deleted Item. Available while stocks last.
Part Number: WG1R32-040-05HBS0794-ACE
Worm Gears - Pitch 32DP - 40 tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Acetal
2 Available Now | Item Discontinued - Up to 2 may be ordered online. No backorders. Please contact us if you need a larger quantity
$7.00 AUD
$13.30 AUD $7.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Pitch
32DP

Teeth
40

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 32DP 40 - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Acetal
Material: Acetal    Bore (B): 7.938    Overall Length (l): 12.700    Pitch Diameter (C): 31.75 mm    Face Width (fw): 4.762 mm    Bore Type: Finished    Hub Diameter (Dh): 15.87 Brass Insert mm    Locking Type: Set Screw   
Deleted Item. Available while stocks last.
Part Number: WG1R32-040-05HBS0794-ACE
Worm Gears - Pitch 32DP - 40 tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Acetal
2 Available Now | Item Discontinued - Up to 2 may be ordered online. No backorders. Please contact us if you need a larger quantity
$7.00 AUD
$13.30 AUD $7.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

2 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Pitch
32DP

Teeth
60

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
6.350
Overall Length (l)
12.700
Worm Gears - Pitch 32DP 60 - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Bronze
Material: Bronze    Pitch Diameter (C): 47.63 mm    Face Width (fw): 4.762 mm    Bore Type: Finished    Hub Diameter (Dh): 17.46 mm    Locking Type: No Set Screw   
Deleted Item. Available while stocks last.
Part Number: WG1R32-060-05HP0635-BRZ
Worm Gears - Pitch 32DP - 60 tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Bronze
11 Available Now | Item Discontinued - Up to 11 may be ordered online. No backorders. Please contact us if you need a larger quantity
$62.00 AUD
$117.80 AUD $62.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

11 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Pitch
32DP

Teeth
60

Lead Angle
4 Deg 5 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 32DP 60 - 4 Deg 5 Min with 14.5 Deg Pressure Angle - Bronze
Material: Bronze    Bore (B): 6.350    Overall Length (l): 12.700    Pitch Diameter (C): 47.63 mm    Face Width (fw): 4.762 mm    Bore Type: Finished    Hub Diameter (Dh): 17.46 mm    Locking Type: No Set Screw   
Deleted Item. Available while stocks last.
Part Number: WG1R32-060-05HP0635-BRZ
Worm Gears - Pitch 32DP - 60 tooth - 4 Deg 5 Min with 14.5 Deg Pressure Angle 32DP - Bronze
11 Available Now | Item Discontinued - Up to 11 may be ordered online. No backorders. Please contact us if you need a larger quantity
$62.00 AUD
$117.80 AUD $62.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

11 Available Now. These are priced to quit. Please contact us for a quote if you require more.