Gears - Worm - 24DP

Gears -> Worm -> 24DP

There are 8 products in the sub-categories of Gears - Worm - 24DP. Browse the Gears - Worm - 24DP products table.

Category Details

A selection of 24DP Worm Gears. This is the main category in this series

  • Worms and Gears must be chosen from the same pitch, direction and lead angle match. DP is Diametrical Pitch, which is an imperial standard.
  • A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.
  • If there is no matching worm for a stocked gear, please contact us for a special procurement. An expanded range may be available on special order. Please enquire.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Gears - Worm - 24DP category on the Small Parts & Bearings online store.
Pitch Teeth Lead Angle Direction Bore (B) Overall Length (l) Indicative
Image
Pitch
24DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 46 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
4.762
Overall Length (l)
22.622
Worm Gears - Pitch 24DP Worm - 1 Start - 4 Deg 46 Min with 14.5 Deg Pressure Angle - Nylon Polyamide 6/6
Material: Nylon (Polyamide 6/6)    Pitch Diameter (C): 12.700 mm    Face Width (fw): 16.271 mm    Bore Type: Finished    Hub Diameter (Dh): 9.398 mm    Locking Type: No Locking   
Part Number: WM1R24-1-023HP048-NY
Worm Gears - Pitch 24DP - Worm - 1 Start tooth - 4 Deg 46 Min with 14.5 Deg Pressure Angle 24DP - Nylon Polyamide 6/6
Contact Us | Special Order Only - Please contact us if you need a large quantity
Pitch Teeth Lead Angle Direction Indicative
Image
Pitch
24DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 46 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 24DP Worm - 1 Start - 4 Deg 46 Min with 14.5 Deg Pressure Angle - Nylon Polyamide 6/6
Material: Nylon (Polyamide 6/6)    Bore (B): 4.762    Overall Length (l): 22.622    Pitch Diameter (C): 12.700 mm    Face Width (fw): 16.271 mm    Bore Type: Finished    Hub Diameter (Dh): 9.398 mm    Locking Type: No Locking   
Part Number: WM1R24-1-023HP048-NY
Worm Gears - Pitch 24DP - Worm - 1 Start tooth - 4 Deg 46 Min with 14.5 Deg Pressure Angle 24DP - Nylon Polyamide 6/6
Contact Us | Special Order Only - Please contact us if you need a large quantity | Orders can be expected around Tue, Jul 11, 2028
Pitch
24DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 46 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
4.762
Overall Length (l)
26.988
Worm Gears - Pitch 24DP Worm - 1 Start - 4 Deg 46 Min with 14.5 Deg Pressure Angle - Carbon Steel Unhardened
Material: Carbon Steel Unhardened    Pitch Diameter (C): 12.700 mm    Face Width (fw): 20.638 mm    Bore Type: Finished    Hub Diameter (Dh): 9.525 mm    Locking Type: No. 47 Hole   
Part Number: WM1R24-1-027HD048-CS
Worm Gears - Pitch 24DP - Worm - 1 Start tooth - 4 Deg 46 Min with 14.5 Deg Pressure Angle 24DP - Carbon Steel Unhardened
Contact Us | Special Order Only - Please contact us if you need a large quantity
Pitch
24DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 46 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 24DP Worm - 1 Start - 4 Deg 46 Min with 14.5 Deg Pressure Angle - Carbon Steel Unhardened
Material: Carbon Steel Unhardened    Bore (B): 4.762    Overall Length (l): 26.988    Pitch Diameter (C): 12.700 mm    Face Width (fw): 20.638 mm    Bore Type: Finished    Hub Diameter (Dh): 9.525 mm    Locking Type: No. 47 Hole   
Part Number: WM1R24-1-027HD048-CS
Worm Gears - Pitch 24DP - Worm - 1 Start tooth - 4 Deg 46 Min with 14.5 Deg Pressure Angle 24DP - Carbon Steel Unhardened
Contact Us | Special Order Only - Please contact us if you need a large quantity | Orders can be expected around Tue, Jul 11, 2028
Pitch
24DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 46 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
6.350
Overall Length (l)
22.225
Worm Gears - Pitch 24DP Worm - 1 Start - 4 Deg 46 Min with 14.5 Deg Pressure Angle - Carbon Steel Unhardened
Material: Carbon Steel Unhardened    Pitch Diameter (C): 12.700 mm    Face Width (fw): 15.875 mm    Bore Type: Finished    Hub Diameter (Dh): 9.525 mm    Locking Type: No. 47 Hole   
Part Number: WM1R24-1-022HD064-CS
Worm Gears - Pitch 24DP - Worm - 1 Start tooth - 4 Deg 46 Min with 14.5 Deg Pressure Angle 24DP - Carbon Steel Unhardened
Contact Us | Special Order Only - Please contact us if you need a large quantity
Pitch
24DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 46 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 24DP Worm - 1 Start - 4 Deg 46 Min with 14.5 Deg Pressure Angle - Carbon Steel Unhardened
Material: Carbon Steel Unhardened    Bore (B): 6.350    Overall Length (l): 22.225    Pitch Diameter (C): 12.700 mm    Face Width (fw): 15.875 mm    Bore Type: Finished    Hub Diameter (Dh): 9.525 mm    Locking Type: No. 47 Hole   
Part Number: WM1R24-1-022HD064-CS
Worm Gears - Pitch 24DP - Worm - 1 Start tooth - 4 Deg 46 Min with 14.5 Deg Pressure Angle 24DP - Carbon Steel Unhardened
Contact Us | Special Order Only - Please contact us if you need a large quantity | Orders can be expected around Tue, Jul 11, 2028
Pitch
24DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 46 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
6.350
Overall Length (l)
26.988
Worm Gears - Pitch 24DP Worm - 1 Start - 4 Deg 46 Min with 14.5 Deg Pressure Angle - Carbon Steel Hardened and Ground
Material: Carbon Steel Hardened and Ground    Pitch Diameter (C): 12.700 mm    Face Width (fw): 20.638 mm    Bore Type: Finished    Hub Diameter (Dh): 9.525 mm    Locking Type: No. 47 Hole   
Part Number: WM1R24-1-027HD064-CSHDG
Worm Gears - Pitch 24DP - Worm - 1 Start tooth - 4 Deg 46 Min with 14.5 Deg Pressure Angle 24DP - Carbon Steel Hardened and Ground
Contact Us | Special Order Only - Please contact us if you need a large quantity
Pitch
24DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 46 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 24DP Worm - 1 Start - 4 Deg 46 Min with 14.5 Deg Pressure Angle - Carbon Steel Hardened and Ground
Material: Carbon Steel Hardened and Ground    Bore (B): 6.350    Overall Length (l): 26.988    Pitch Diameter (C): 12.700 mm    Face Width (fw): 20.638 mm    Bore Type: Finished    Hub Diameter (Dh): 9.525 mm    Locking Type: No. 47 Hole   
Part Number: WM1R24-1-027HD064-CSHDG
Worm Gears - Pitch 24DP - Worm - 1 Start tooth - 4 Deg 46 Min with 14.5 Deg Pressure Angle 24DP - Carbon Steel Hardened and Ground
Contact Us | Special Order Only - Please contact us if you need a large quantity | Orders can be expected around Tue, Jul 11, 2028
Pitch
24DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 46 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
6.350
Overall Length (l)
26.988
Worm Gears - Pitch 24DP Worm - 1 Start - 4 Deg 46 Min with 14.5 Deg Pressure Angle - Carbon Steel Hardened and Polished
Material: Carbon Steel Hardened and Polished    Pitch Diameter (C): 12.700 mm    Face Width (fw): 20.638 mm    Bore Type: Finished    Hub Diameter (Dh): 9.525 mm    Locking Type: No. 47 Hole   
Part Number: WM1R24-1-027HD064-CSHDP
Worm Gears - Pitch 24DP - Worm - 1 Start tooth - 4 Deg 46 Min with 14.5 Deg Pressure Angle 24DP - Carbon Steel Hardened and Polished
Contact Us | Special Order Only - Please contact us if you need a large quantity
Pitch
24DP

Teeth
Worm - 1 Start

Lead Angle
4 Deg 46 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 24DP Worm - 1 Start - 4 Deg 46 Min with 14.5 Deg Pressure Angle - Carbon Steel Hardened and Polished
Material: Carbon Steel Hardened and Polished    Bore (B): 6.350    Overall Length (l): 26.988    Pitch Diameter (C): 12.700 mm    Face Width (fw): 20.638 mm    Bore Type: Finished    Hub Diameter (Dh): 9.525 mm    Locking Type: No. 47 Hole   
Part Number: WM1R24-1-027HD064-CSHDP
Worm Gears - Pitch 24DP - Worm - 1 Start tooth - 4 Deg 46 Min with 14.5 Deg Pressure Angle 24DP - Carbon Steel Hardened and Polished
Contact Us | Special Order Only - Please contact us if you need a large quantity | Orders can be expected around Tue, Jul 11, 2028
Pitch
24DP

Teeth
20

Lead Angle
4 Deg 46 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
4.750
Overall Length (l)
14.288
Worm Gears - Pitch 24DP 20 - 4 Deg 46 Min with 14.5 Deg Pressure Angle - Nylon - Mineral Filled Black
Material: Nylon - Mineral Filled Black    Pitch Diameter (C): 21.16 mm    Face Width (fw): 6.350 mm    Bore Type: Finished    Hub Diameter (Dh): 15.87 mm    Locking Type: No Set Screw   
Deleted Item. Available while stocks last.
Part Number: WG1R24-020-06HP0475-NYB (2 Pcs)
Worm Gears - Pitch 24DP - 20 tooth - 4 Deg 46 Min with 14.5 Deg Pressure Angle 24DP - Nylon - Mineral Filled Black
2 units (4 pcs) Available Now | Item Discontinued - Up to 2 may be ordered online. No backorders. Please contact us if you need a larger quantity
$14.00 AUD
$26.60 AUD $14.00 AUD
2 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

2 units (4 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Pitch
24DP

Teeth
20

Lead Angle
4 Deg 46 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 24DP 20 - 4 Deg 46 Min with 14.5 Deg Pressure Angle - Nylon - Mineral Filled Black
Material: Nylon - Mineral Filled Black    Bore (B): 4.750    Overall Length (l): 14.288    Pitch Diameter (C): 21.16 mm    Face Width (fw): 6.350 mm    Bore Type: Finished    Hub Diameter (Dh): 15.87 mm    Locking Type: No Set Screw   
Deleted Item. Available while stocks last.
Part Number: WG1R24-020-06HP0475-NYB (2 Pcs)
Worm Gears - Pitch 24DP - 20 tooth - 4 Deg 46 Min with 14.5 Deg Pressure Angle 24DP - Nylon - Mineral Filled Black
2 units (4 pcs) Available Now | Item Discontinued - Up to 2 may be ordered online. No backorders. Please contact us if you need a larger quantity
$14.00 AUD
$26.60 AUD $14.00 AUD
2 Per Sell Unit
Excludes GST and overseas Taxes & Duties
Quantity Required

2 units (4 pcs) Available Now. These are priced to quit. Please contact us for a quote if you require more.
Pitch
24DP

Teeth
30

Lead Angle
4 Deg 46 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
4.750
Overall Length (l)
14.288
Worm Gears - Pitch 24DP 30 - 4 Deg 46 Min with 14.5 Deg Pressure Angle - Nylon - Mineral Filled Black
Material: Nylon - Mineral Filled Black    Pitch Diameter (C): 31.75 mm    Face Width (fw): 6.350 mm    Bore Type: Finished    Hub Diameter (Dh): 15.87 mm    Locking Type: No Set Screw   
Deleted Item. Available while stocks last.
Part Number: WG1R24-030-06HP0475-NYB
Worm Gears - Pitch 24DP - 30 tooth - 4 Deg 46 Min with 14.5 Deg Pressure Angle 24DP - Nylon - Mineral Filled Black
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.00 AUD
$11.40 AUD $6.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Pitch
24DP

Teeth
30

Lead Angle
4 Deg 46 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 24DP 30 - 4 Deg 46 Min with 14.5 Deg Pressure Angle - Nylon - Mineral Filled Black
Material: Nylon - Mineral Filled Black    Bore (B): 4.750    Overall Length (l): 14.288    Pitch Diameter (C): 31.75 mm    Face Width (fw): 6.350 mm    Bore Type: Finished    Hub Diameter (Dh): 15.87 mm    Locking Type: No Set Screw   
Deleted Item. Available while stocks last.
Part Number: WG1R24-030-06HP0475-NYB
Worm Gears - Pitch 24DP - 30 tooth - 4 Deg 46 Min with 14.5 Deg Pressure Angle 24DP - Nylon - Mineral Filled Black
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.00 AUD
$11.40 AUD $6.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Pitch
24DP

Teeth
40

Lead Angle
4 Deg 46 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Bore (B)
7.925
Overall Length (l)
14.288
Worm Gears - Pitch 24DP 40 - 4 Deg 46 Min with 14.5 Deg Pressure Angle - Nylon - Mineral Filled Black
Material: Nylon - Mineral Filled Black    Pitch Diameter (C): 42.34 mm    Face Width (fw): 6.350 mm    Bore Type: Finished    Hub Diameter (Dh): 19.05 mm    Locking Type: No Set Screw   
Deleted Item. Available while stocks last.
Part Number: WG1R24-040-06HP0793-NYB
Worm Gears - Pitch 24DP - 40 tooth - 4 Deg 46 Min with 14.5 Deg Pressure Angle 24DP - Nylon - Mineral Filled Black
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.00 AUD
$11.40 AUD $6.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Pitch
24DP

Teeth
40

Lead Angle
4 Deg 46 Min with 14.5 Deg Pressure Angle

Direction
Right Hand
Worm Gears - Pitch 24DP 40 - 4 Deg 46 Min with 14.5 Deg Pressure Angle - Nylon - Mineral Filled Black
Material: Nylon - Mineral Filled Black    Bore (B): 7.925    Overall Length (l): 14.288    Pitch Diameter (C): 42.34 mm    Face Width (fw): 6.350 mm    Bore Type: Finished    Hub Diameter (Dh): 19.05 mm    Locking Type: No Set Screw   
Deleted Item. Available while stocks last.
Part Number: WG1R24-040-06HP0793-NYB
Worm Gears - Pitch 24DP - 40 tooth - 4 Deg 46 Min with 14.5 Deg Pressure Angle 24DP - Nylon - Mineral Filled Black
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$6.00 AUD
$11.40 AUD $6.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.