Gears - Spur - Hubless - 32DP - Brass - 14.5 Degree PA

2 Products in this selection
  • PCD in mm = No. of Teeth x 0.79375 (1/32 in.). 14.5 Degree Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.
  • The diameter increases by 1 inch for every 32 teeth
  • 32 Diametrical Pitch. Approx 2.49mm between the teeth.
Additional resources:
A more concise listing may be found on the Smallparts store at Gears - Spur - Hubless - 32DP - Brass - 14.5 Degree PA. Smallparts promote the most popular MBA products.
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Type Indicative
Image
Teeth
6
Pitch Circle Diameter (PD)
4.78
mm

(0.188 in.)
Bore (d)
1.588
mm

(0.063 in.)
Outside Diameter (OD)
6.375
mm
Face Width (FW)
4.76
mm
Type
Hubless
Spur Gears - 6 tooth - 4.78x1.588 mm - Brass
Material: Brass    Locking Method: None    Quality: Commercial   
Part Number: G005B-06-V32-048-016-B-N Spur Gears - 6 tooth - 4.78x1.588 mm - Brass
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
Teeth
6
Pitch Circle Diameter (PD)
4.78
mm

(0.188 in.)
Bore (d)
1.588
mm

(0.063 in.)
Outside Diameter (OD)
6.375
mm
Spur Gears - 6 tooth - 4.78x1.588 mm - Brass
Material: Brass    Face Width (FW): 4.76 mm    Type: Hubless    Locking Method: None    Quality: Commercial   
Part Number: G005B-06-V32-048-016-B-N Spur Gears - 6 tooth - 4.78x1.588 mm - Brass
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Teeth
11
Pitch Circle Diameter (PD)
8.74
mm

(0.344 in.)
Bore (d)
3.175
mm

(0.125 in.)
Outside Diameter (OD)
10.338
mm
Face Width (FW)
4.76
mm
Type
Hubless
Spur Gears - 11 tooth - 8.74x3.175 mm - Brass
Material: Brass    Locking Method: None    Quality: Commercial   
Part Number: G009B-11-V32-048-032-B-N Spur Gears - 11 tooth - 8.74x3.175 mm - Brass
1 Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$9.50 AUD $5.00 AUD
Each
Teeth
11
Pitch Circle Diameter (PD)
8.74
mm

(0.344 in.)
Bore (d)
3.175
mm

(0.125 in.)
Outside Diameter (OD)
10.338
mm
Spur Gears - 11 tooth - 8.74x3.175 mm - Brass
Material: Brass    Face Width (FW): 4.76 mm    Type: Hubless    Locking Method: None    Quality: Commercial   
Part Number: G009B-11-V32-048-032-B-N Spur Gears - 11 tooth - 8.74x3.175 mm - Brass
1 Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$9.50 AUD $5.00 AUD
Each