Gears - Spur - Hubbed - Module 0.5 - Plastic - With Insert

Gears -> Spur -> Hubbed -> Module 0.5 -> Plastic -> With Insert

There are 2 products in the sub-categories of Gears - Spur - Hubbed - Module 0.5 - Plastic - With Insert. Browse the Gears - Spur - Hubbed - Module 0.5 - Plastic - With Insert products table.

Category Details

A selection of With Insert Plastic Module 0.5 Hubbed Spur Gears. PCD in mm = No. of Teeth x 0.5. 20 Degree Pressure Angle.

  • There are more items available in this range than currently listed. Please enquire if you have special requirements. Expanded range includes hardened gears, stainless steel, antibacklash, and special bore sizes.
  • Be sure to match the pitch type and tooth angle when selecting spur gears.
  • An expanded range may be available on special order. Please enquire.
  • The diameter increases by 0.5mm per tooth
  • Module 0.5. Approximately 1.57mm between the teeth.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Gears - Spur - Hubbed - Module 0.5 - Plastic - With Insert category on the Small Parts & Bearings online store.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Type Indicative
Image
Number of Teeth
21

Pitch Circle Diameter (PD)
10.50
mm

(Equiv. 0.413 in.)
Bore (d)
3.000
mm

(Equiv. 0.118 in.)
Outside Diameter (OD)
11.500
mm
Face Width (FW)
3.000
mm
Type
Hubbed
Spur Gears - 21 tooth - 10.5x3 mm Hubbed - Acetal - Brass Insert Gear
Material: Acetal - Brass Insert    Hub Diameter (D1): 8.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: Set Screw    Quality: Commercial - Molded   
Part Number: G011B-021-M05-030-030-AB-G
Spur Gears - 21 tooth - 10.5x3 mm Hubbed - Acetal - Brass Insert Gear
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$7.00 AUD
$13.30 AUD $7.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
Number of Teeth
21

Pitch Circle Diameter (PD)
10.50
mm

(Equiv. 0.413 in.)
Bore (d)
3.000
mm

(Equiv. 0.118 in.)
Outside Diameter (OD)
11.500
mm
Spur Gears - 21 tooth - 10.5x3 mm Hubbed - Acetal - Brass Insert Gear
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Type: Hubbed    Hub Diameter (D1): 8.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: Set Screw    Quality: Commercial - Molded   
Part Number: G011B-021-M05-030-030-AB-G
Spur Gears - 21 tooth - 10.5x3 mm Hubbed - Acetal - Brass Insert Gear
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$7.00 AUD
$13.30 AUD $7.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Number of Teeth
24

Pitch Circle Diameter (PD)
12.00
mm

(Equiv. 0.472 in.)
Bore (d)
4.000
mm

(Equiv. 0.157 in.)
Outside Diameter (OD)
13.000
mm
Face Width (FW)
3.000
mm
Type
Hubbed
Spur Gears - 24 tooth - 12x4 mm Hubbed - Acetal - Brass Insert Gear
Material: Acetal - Brass Insert    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: Set Screw    Quality: Commercial - Molded   
Part Number: G012B-024-M05-030-040-AB-G
Spur Gears - 24 tooth - 12x4 mm Hubbed - Acetal - Brass Insert Gear
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$9.00 AUD
$17.10 AUD $9.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Number of Teeth
24

Pitch Circle Diameter (PD)
12.00
mm

(Equiv. 0.472 in.)
Bore (d)
4.000
mm

(Equiv. 0.157 in.)
Outside Diameter (OD)
13.000
mm
Spur Gears - 24 tooth - 12x4 mm Hubbed - Acetal - Brass Insert Gear
Material: Acetal - Brass Insert    Face Width (FW): 3.000 mm    Type: Hubbed    Hub Diameter (D1): 10.00 mm    Hub Projection (HL): 7.00 mm    Locking Method: Set Screw    Quality: Commercial - Molded   
Part Number: G012B-024-M05-030-040-AB-G
Spur Gears - 24 tooth - 12x4 mm Hubbed - Acetal - Brass Insert Gear
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$9.00 AUD
$17.10 AUD $9.00 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.