Gears - Spur - Hubbed - 48DP - 20 Degree - Aluminium

Gears -> Spur -> Hubbed -> 48DP -> 20 Degree -> Aluminium

There is only 1 product in the sub-categories of Gears - Spur - Hubbed - 48DP - 20 Degree - Aluminium. Browse the Gears - Spur - Hubbed - 48DP - 20 Degree - Aluminium products table.

Category Details

A selection of Aluminium 20 Degree 48DP Hubbed Spur Gears. PCD in mm = No. of Teeth x 0.5292 (1/48 in.). 20 Degree Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

  • There are more items available in this range than currently listed. Please enquire if you have special requirements. Expanded range includes hardened gears, stainless steel, antibacklash, and special bore sizes.
  • Be sure to match the pitch type and tooth angle when selecting spur gears.
  • An expanded range may be available on special order. Please enquire.
  • The diameter increases by 1 inch for every 48 teeth
  • 48 Diametrical Pitch. Approx 1.66mm between the teeth.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Gears - Spur - Hubbed - 48DP - 20 Degree - Aluminium category on the Small Parts & Bearings online store.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Type Indicative
Image
Number of Teeth
25

Pitch Circle Diameter (PD)
13.23
mm

(Equiv. 0.521 in.)
Bore (d)
4.762
mm

(Equiv. 0.187 in.)
Outside Diameter (OD)
14.277
mm
Face Width (FW)
3.18
mm
Type
Hubbed
Spur Gears - 25 tooth - 13.23x4.762 mm Hubbed - Aluminium Alloy 2024 Gear
Material: Aluminium Alloy 2024    Hub Diameter (D1): 9.53 mm    Hub Projection (HL): 5.54 mm    Locking Method: Set Screw    Quality: AGMA Q10   
Part Number: G013B-025-D48-032-048-AL-G
Spur Gears - 25 tooth - 13.23x4.762 mm Hubbed - Aluminium Alloy 2024 Gear
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Each
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
Number of Teeth
25

Pitch Circle Diameter (PD)
13.23
mm

(Equiv. 0.521 in.)
Bore (d)
4.762
mm

(Equiv. 0.187 in.)
Outside Diameter (OD)
14.277
mm
Spur Gears - 25 tooth - 13.23x4.762 mm Hubbed - Aluminium Alloy 2024 Gear
Material: Aluminium Alloy 2024    Face Width (FW): 3.18 mm    Type: Hubbed    Hub Diameter (D1): 9.53 mm    Hub Projection (HL): 5.54 mm    Locking Method: Set Screw    Quality: AGMA Q10   
Part Number: G013B-025-D48-032-048-AL-G
Spur Gears - 25 tooth - 13.23x4.762 mm Hubbed - Aluminium Alloy 2024 Gear
1 Available Now | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Each
Quantity Required

1 Available Now. These are priced to quit. Please contact us for a quote if you require more.