Gears - Spur - Hubbed - 32DP - 14.5 Degree - Steel

Gears -> Spur -> Hubbed -> 32DP -> 14.5 Degree -> Steel

There are 6 products in the sub-categories of Gears - Spur - Hubbed - 32DP - 14.5 Degree - Steel. Browse the Gears - Spur - Hubbed - 32DP - 14.5 Degree - Steel products table.

Category Details

A selection of Steel 14.5 Degree 32DP Hubbed Spur Gears. PCD in mm = No. of Teeth x 0.79375 (1/32 in.). 14.5 Degree Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

  • There are more items available in this range than currently listed. Please enquire if you have special requirements. Expanded range includes hardened gears, stainless steel, antibacklash, and special bore sizes.
  • Be sure to match the pitch type and tooth angle when selecting spur gears.
  • An expanded range may be available on special order. Please enquire.
  • The diameter increases by 1 inch for every 32 teeth
  • 32 Diametrical Pitch. Approx 2.49mm between the teeth.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Gears - Spur - Hubbed - 32DP - 14.5 Degree - Steel category on the Small Parts & Bearings online store.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Type Indicative
Image
Spur Gears - 16 tooth - 12.7x4.763 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
16
Pitch Circle Diameter (PD)
12.700
mm
Bore (d)
4.763
mm
Outside Diameter (OD)
14.275
mm
Face Width (FW)
4.775
mm
Type
Hubbed
Spur Gears - 16 tooth - 12.7x4.763 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Hub Diameter (D1): 9.906 mm    Hub Projection (HL): 7.874 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G013B-016-V32-048-048-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Fri, Aug 07, 2026
$174.14 AUD
$174.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Number of Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
Spur Gears - 16 tooth - 12.7x4.763 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
16
Pitch Circle Diameter (PD)
12.700
mm
Bore (d)
4.763
mm
Outside Diameter (OD)
14.275
mm
Spur Gears - 16 tooth - 12.7x4.763 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Face Width (FW): 4.775 mm    Type: Hubbed    Hub Diameter (D1): 9.906 mm    Hub Projection (HL): 7.874 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G013B-016-V32-048-048-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Fri, Aug 07, 2026
$174.14 AUD
$174.14 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spur Gears - 18 tooth - 14.275x4.763 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
18
Pitch Circle Diameter (PD)
14.275
mm
Bore (d)
4.763
mm
Outside Diameter (OD)
15.850
mm
Face Width (FW)
4.775
mm
Type
Hubbed
Spur Gears - 18 tooth - 14.275x4.763 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Hub Diameter (D1): 11.430 mm    Hub Projection (HL): 7.874 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G014B-018-V32-048-048-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Fri, Aug 07, 2026
$167.68 AUD
$201.22 AUD $167.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spur Gears - 18 tooth - 14.275x4.763 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
18
Pitch Circle Diameter (PD)
14.275
mm
Bore (d)
4.763
mm
Outside Diameter (OD)
15.850
mm
Spur Gears - 18 tooth - 14.275x4.763 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Face Width (FW): 4.775 mm    Type: Hubbed    Hub Diameter (D1): 11.430 mm    Hub Projection (HL): 7.874 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G014B-018-V32-048-048-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Fri, Aug 07, 2026
$167.68 AUD
$201.22 AUD $167.68 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spur Gears - 20 tooth - 15.875x6.35 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
20
Pitch Circle Diameter (PD)
15.875
mm
Bore (d)
6.350
mm
Outside Diameter (OD)
17.450
mm
Face Width (FW)
4.775
mm
Type
Hubbed
Spur Gears - 20 tooth - 15.875x6.35 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Hub Diameter (D1): 13.208 mm    Hub Projection (HL): 7.874 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G016B-020-V32-048-064-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Fri, Aug 07, 2026
$164.77 AUD
$197.73 AUD $164.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spur Gears - 20 tooth - 15.875x6.35 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
20
Pitch Circle Diameter (PD)
15.875
mm
Bore (d)
6.350
mm
Outside Diameter (OD)
17.450
mm
Spur Gears - 20 tooth - 15.875x6.35 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Face Width (FW): 4.775 mm    Type: Hubbed    Hub Diameter (D1): 13.208 mm    Hub Projection (HL): 7.874 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G016B-020-V32-048-064-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Fri, Aug 07, 2026
$164.77 AUD
$197.73 AUD $164.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spur Gears - 24 tooth - 19.05x7.938 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
24
Pitch Circle Diameter (PD)
19.050
mm
Bore (d)
7.938
mm
Outside Diameter (OD)
20.625
mm
Face Width (FW)
4.775
mm
Type
Hubbed
Spur Gears - 24 tooth - 19.05x7.938 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Hub Diameter (D1): 16.256 mm    Hub Projection (HL): 7.874 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G019B-024-V32-048-079-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Fri, Aug 07, 2026
$162.32 AUD
$194.78 AUD $162.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spur Gears - 24 tooth - 19.05x7.938 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
24
Pitch Circle Diameter (PD)
19.050
mm
Bore (d)
7.938
mm
Outside Diameter (OD)
20.625
mm
Spur Gears - 24 tooth - 19.05x7.938 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Face Width (FW): 4.775 mm    Type: Hubbed    Hub Diameter (D1): 16.256 mm    Hub Projection (HL): 7.874 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G019B-024-V32-048-079-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Fri, Aug 07, 2026
$162.32 AUD
$194.78 AUD $162.32 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spur Gears - 24 tooth - 19.05x7.938 mm Hubbed - Carbon Steel Gear
Number of Teeth
24
Pitch Circle Diameter (PD)
19.05
mm
Bore (d)
7.938
mm
Outside Diameter (OD)
20.650
mm
Face Width (FW)
4.76
mm
Type
Hubbed
Spur Gears - 24 tooth - 19.05x7.938 mm Hubbed - Carbon Steel Gear
Material: Carbon Steel    Hub Diameter (D1): 16.67 mm    Hub Projection (HL): 7.94 mm    Locking Method: None    Quality: Commercial   
Part Number: G019B-024-V32-048-079-C-P (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Tue, Oct 13, 2026
$71.59 AUD
$71.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spur Gears - 24 tooth - 19.05x7.938 mm Hubbed - Carbon Steel Gear
Number of Teeth
24
Pitch Circle Diameter (PD)
19.05
mm
Bore (d)
7.938
mm
Outside Diameter (OD)
20.650
mm
Spur Gears - 24 tooth - 19.05x7.938 mm Hubbed - Carbon Steel Gear
Material: Carbon Steel    Face Width (FW): 4.76 mm    Type: Hubbed    Hub Diameter (D1): 16.67 mm    Hub Projection (HL): 7.94 mm    Locking Method: None    Quality: Commercial   
Part Number: G019B-024-V32-048-079-C-P (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Tue, Oct 13, 2026
$71.59 AUD
$71.59 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spur Gears - 40 tooth - 31.75x9.525 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
40
Pitch Circle Diameter (PD)
31.750
mm
Bore (d)
9.525
mm
Outside Diameter (OD)
33.325
mm
Face Width (FW)
4.775
mm
Type
Hubbed
Spur Gears - 40 tooth - 31.75x9.525 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Hub Diameter (D1): 22.352 mm    Hub Projection (HL): 9.652 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G032B-040-V32-048-095-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Fri, Aug 07, 2026
$175.77 AUD
$210.93 AUD $175.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.
Spur Gears - 40 tooth - 31.75x9.525 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Number of Teeth
40
Pitch Circle Diameter (PD)
31.750
mm
Bore (d)
9.525
mm
Outside Diameter (OD)
33.325
mm
Spur Gears - 40 tooth - 31.75x9.525 mm Hubbed - Steel 0.20 carbon steel with no subsequent treatment Gear
Material: Steel 0.20 carbon steel with no subsequent treatment    Face Width (FW): 4.775 mm    Type: Hubbed    Hub Diameter (D1): 22.352 mm    Hub Projection (HL): 9.652 mm    Locking Method: Set Screw    Quality: Commercial   
Part Number: G032B-040-V32-048-095-CG (Each)
Out of Stock | Backorder Now | Backorder now for delivery around Fri, Aug 07, 2026
$175.77 AUD
$210.93 AUD $175.77 AUD
Each
Excludes GST and overseas Taxes & Duties
Quantity Required

Backorder: Out of Stock.