Bearings - Thrust Ball - Grooved - Stainless Steel

Bearings -> Thrust Ball -> Grooved -> Stainless Steel

There are 8 products in the sub-categories of Bearings - Thrust Ball - Grooved - Stainless Steel. Browse the Bearings - Thrust Ball - Grooved - Stainless Steel products table.

Category Details

A selection of Stainless Steel Grooved Thrust Ball Bearings. 3 Piece Thrust Bearings Open Type

  • Thrust ball bearings provide for axial loads. They are designed to handle forces that push or pull along the axis of a rotating shaft
  • Commonly used in automotive, electric motors, marine propulsion, pumps and compressors, aerospace applications, industrial machinery, and wind turbines.
  • An expanded range may be available on special order. Please enquire.
  • These bearings are designed so that when one ring turns, the other remains stationary.
  • Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft.
  • Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate.
  • Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Bearings - Thrust Ball - Grooved - Stainless Steel category on the Small Parts & Bearings online store.
Shaft Diameter (d1) OD (D1) Thickness (T) Bore (d2) OD (D2) Dynamic Load Capacity Indicative
Image
Shaft Diameter (d1)
4.000
mm

(Equiv. 0.157 in.)
OD (D1)
9.000
mm

(Equiv. 0.354 in.)
Thickness (T)
4.000
mm

(Equiv. 0.157 in.)
Bore (d2)
4.200
mm
OD (D2)
8.800
mm
Dynamic Load Capacity
77
kgf
Thrust Ball Bearings - 4x9x4 mm / 4.2 mm Grooved - Stainless Steel AISI 440C
Material: Stainless Steel AISI 440C    Cage Type: AIS I 440C Stainless Steel   
Part Number: T-0040-0090-G-S440
Thrust Ball Bearings - 4x9x4 mm / 4.2 mm Grooved - Stainless Steel AISI 440C Bearing
27 Available Now | Further orders can be expected around Sun, Sep 21, 2025
$7.41 AUD
$7.41 AUD
Each
Quantity Required

27 Available Now. Backorder if more than 27.
Shaft Diameter (d1) OD (D1) Thickness (T) Bore (d2) Indicative
Image
Shaft Diameter (d1)
4.000
mm

(Equiv. 0.157 in.)
OD (D1)
9.000
mm

(Equiv. 0.354 in.)
Thickness (T)
4.000
mm

(Equiv. 0.157 in.)
Bore (d2)
4.200
mm
Thrust Ball Bearings - 4x9x4 mm / 4.2 mm Grooved - Stainless Steel AISI 440C
Material: Stainless Steel AISI 440C    OD (D2): 8.800 mm    Dynamic Load Capacity: 77 kgf    Cage Type: AIS I 440C Stainless Steel   
Part Number: T-0040-0090-G-S440
Thrust Ball Bearings - 4x9x4 mm / 4.2 mm Grooved - Stainless Steel AISI 440C Bearing
27 Available Now | Further orders can be expected around Sun, Sep 21, 2025
$7.41 AUD
$7.41 AUD
Each
Quantity Required

27 Available Now. Backorder if more than 27.
Shaft Diameter (d1)
8.000
mm

(Equiv. 0.315 in.)
OD (D1)
16.000
mm

(Equiv. 0.63 in.)
Thickness (T)
5.000
mm

(Equiv. 0.197 in.)
Bore (d2)
8.200
mm
OD (D2)
15.800
mm
Dynamic Load Capacity
391
kgf
Thrust Ball Bearings - 8x16x5 mm / 8.2 mm Grooved - Stainless Steel AISI 440C
Material: Stainless Steel AISI 440C    Info: Chinese    Cage Type: AIS I 440C Stainless Steel   
Part Number: T-0080-0160-G-S440-ECO
Thrust Ball Bearings - 8x16x5 mm / 8.2 mm Grooved - Stainless Steel AISI 440C Bearing
82 Available Now | Further orders can be expected around Sun, Sep 21, 2025
$7.23 AUD
$7.23 AUD
Each
Quantity Required

82 Available Now. Backorder if more than 82.
Shaft Diameter (d1)
8.000
mm

(Equiv. 0.315 in.)
OD (D1)
16.000
mm

(Equiv. 0.63 in.)
Thickness (T)
5.000
mm

(Equiv. 0.197 in.)
Bore (d2)
8.200
mm
Thrust Ball Bearings - 8x16x5 mm / 8.2 mm Grooved - Stainless Steel AISI 440C
Material: Stainless Steel AISI 440C    OD (D2): 15.800 mm    Dynamic Load Capacity: 391 kgf    Info: Chinese    Cage Type: AIS I 440C Stainless Steel   
Part Number: T-0080-0160-G-S440-ECO
Thrust Ball Bearings - 8x16x5 mm / 8.2 mm Grooved - Stainless Steel AISI 440C Bearing
82 Available Now | Further orders can be expected around Sun, Sep 21, 2025
$7.23 AUD
$7.23 AUD
Each
Quantity Required

82 Available Now. Backorder if more than 82.
Shaft Diameter (d1)
8.000
mm

(Equiv. 0.315 in.)
OD (D1)
16.000
mm

(Equiv. 0.63 in.)
Thickness (T)
5.000
mm

(Equiv. 0.197 in.)
Bore (d2)
8.200
mm
OD (D2)
15.800
mm
Dynamic Load Capacity
391
kgf
Thrust Ball Bearings - 8x16x5 mm / 8.2 mm Grooved - Stainless Steel AISI 440C
Material: Stainless Steel AISI 440C    Cage Type: AIS I 440C Stainless Steel   
Part Number: T-0080-0160-G-S440
Thrust Ball Bearings - 8x16x5 mm / 8.2 mm Grooved - Stainless Steel AISI 440C Bearing
113 Available Now | Further orders can be expected around Sat, Sep 27, 2025
$17.14 AUD
$17.14 AUD
Each
Quantity Required

113 Available Now. Backorder if more than 113.
Shaft Diameter (d1)
8.000
mm

(Equiv. 0.315 in.)
OD (D1)
16.000
mm

(Equiv. 0.63 in.)
Thickness (T)
5.000
mm

(Equiv. 0.197 in.)
Bore (d2)
8.200
mm
Thrust Ball Bearings - 8x16x5 mm / 8.2 mm Grooved - Stainless Steel AISI 440C
Material: Stainless Steel AISI 440C    OD (D2): 15.800 mm    Dynamic Load Capacity: 391 kgf    Cage Type: AIS I 440C Stainless Steel   
Part Number: T-0080-0160-G-S440
Thrust Ball Bearings - 8x16x5 mm / 8.2 mm Grooved - Stainless Steel AISI 440C Bearing
113 Available Now | Further orders can be expected around Sat, Sep 27, 2025
$17.14 AUD
$17.14 AUD
Each
Quantity Required

113 Available Now. Backorder if more than 113.
Shaft Diameter (d1)
10.000
mm

(Equiv. 0.394 in.)
OD (D1)
18.000
mm

(Equiv. 0.709 in.)
Thickness (T)
5.500
mm

(Equiv. 0.217 in.)
Bore (d2)
10.200
mm
OD (D2)
17.800
mm
Dynamic Load Capacity
193
kgf
Thrust Ball Bearings - 10x18x5.5 mm / 10.2 mm Grooved - Stainless Steel AISI 440C
Material: Stainless Steel AISI 440C    Cage Type: AIS I 440C Stainless Steel   
Part Number: T-0100-0180-G-S440-ECO (100 Pcs)
Thrust Ball Bearings - 10x18x5.5 mm / 10.2 mm Grooved - Stainless Steel AISI 440C Bearing
Out of Stock | Backorder Now | Orders can be expected around Sun, Sep 21, 2025
$247.50 AUD
$458.01 AUD $247.50 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (d1)
10.000
mm

(Equiv. 0.394 in.)
OD (D1)
18.000
mm

(Equiv. 0.709 in.)
Thickness (T)
5.500
mm

(Equiv. 0.217 in.)
Bore (d2)
10.200
mm
Thrust Ball Bearings - 10x18x5.5 mm / 10.2 mm Grooved - Stainless Steel AISI 440C
Material: Stainless Steel AISI 440C    OD (D2): 17.800 mm    Dynamic Load Capacity: 193 kgf    Cage Type: AIS I 440C Stainless Steel   
Part Number: T-0100-0180-G-S440-ECO (100 Pcs)
Thrust Ball Bearings - 10x18x5.5 mm / 10.2 mm Grooved - Stainless Steel AISI 440C Bearing
Out of Stock | Backorder Now | Orders can be expected around Sun, Sep 21, 2025
$247.50 AUD
$458.01 AUD $247.50 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (d1)
10.000
mm

(Equiv. 0.394 in.)
OD (D1)
18.000
mm

(Equiv. 0.709 in.)
Thickness (T)
5.500
mm

(Equiv. 0.217 in.)
Bore (d2)
10.200
mm
OD (D2)
17.800
mm
Dynamic Load Capacity
193
kgf
Thrust Ball Bearings - 10x18x5.5 mm / 10.2 mm Grooved - Stainless Steel AISI 440C
Material: Stainless Steel AISI 440C    Cage Type: AIS I 440C Stainless Steel   
Part Number: T-0100-0180-G-S440
Thrust Ball Bearings - 10x18x5.5 mm / 10.2 mm Grooved - Stainless Steel AISI 440C Bearing
Out of Stock | Backorder Now | More stock due: 50 around Thu, Sep 18, 2025 | Further orders can be expected around Sat, Sep 27, 2025
$48.41 AUD
$48.41 AUD
Each
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (d1)
10.000
mm

(Equiv. 0.394 in.)
OD (D1)
18.000
mm

(Equiv. 0.709 in.)
Thickness (T)
5.500
mm

(Equiv. 0.217 in.)
Bore (d2)
10.200
mm
Thrust Ball Bearings - 10x18x5.5 mm / 10.2 mm Grooved - Stainless Steel AISI 440C
Material: Stainless Steel AISI 440C    OD (D2): 17.800 mm    Dynamic Load Capacity: 193 kgf    Cage Type: AIS I 440C Stainless Steel   
Part Number: T-0100-0180-G-S440
Thrust Ball Bearings - 10x18x5.5 mm / 10.2 mm Grooved - Stainless Steel AISI 440C Bearing
Out of Stock | Backorder Now | More stock due: 50 around Thu, Sep 18, 2025 | Further orders can be expected around Sat, Sep 27, 2025
$48.41 AUD
$48.41 AUD
Each
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (d1)
10.000
mm

(Equiv. 0.394 in.)
OD (D1)
26.000
mm

(Equiv. 1.024 in.)
Thickness (T)
11.000
mm

(Equiv. 0.433 in.)
Bore (d2)
12.000
mm
OD (D2)
26.000
mm
Dynamic Load Capacity
1134
kgf
Thrust Ball Bearings - 10x26x11 mm / 12 mm Grooved - Stainless Steel AISI 420C
Material: Stainless Steel AISI 420C    Info: Chinese    Cage Type: AIS I 420 Stainless Steel   
Part Number: T-0100-0260-G-51200-S420-ECO (800 Pcs)
Thrust Ball Bearings - 10x26x11 mm / 12 mm Grooved - Stainless Steel AISI 420C Bearing
Out of Stock | Backorder Now | Orders can be expected around Sun, Sep 21, 2025
$3,322.95 AUD
$6,156.36 AUD $3,322.95 AUD
Per 800
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (d1)
10.000
mm

(Equiv. 0.394 in.)
OD (D1)
26.000
mm

(Equiv. 1.024 in.)
Thickness (T)
11.000
mm

(Equiv. 0.433 in.)
Bore (d2)
12.000
mm
Thrust Ball Bearings - 10x26x11 mm / 12 mm Grooved - Stainless Steel AISI 420C
Material: Stainless Steel AISI 420C    OD (D2): 26.000 mm    Dynamic Load Capacity: 1134 kgf    Info: Chinese    Cage Type: AIS I 420 Stainless Steel   
Part Number: T-0100-0260-G-51200-S420-ECO (800 Pcs)
Thrust Ball Bearings - 10x26x11 mm / 12 mm Grooved - Stainless Steel AISI 420C Bearing
Out of Stock | Backorder Now | Orders can be expected around Sun, Sep 21, 2025
$3,322.95 AUD
$6,156.36 AUD $3,322.95 AUD
Per 800
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (d1)
12.000
mm

(Equiv. 0.472 in.)
OD (D1)
26.000
mm

(Equiv. 1.024 in.)
Thickness (T)
9.000
mm

(Equiv. 0.354 in.)
Bore (d2)
13.000
mm
OD (D2)
26.000
mm
Dynamic Load Capacity
1570
kgf
Thrust Ball Bearings - 12x26x9 mm / 13 mm Grooved - Stainless Steel AISI 420C
Material: Stainless Steel AISI 420C    Info: Chinese    Cage Type: AIS I 420 Stainless Steel   
Part Number: T-0120-0260-G-51101-S420-ECO (100 Pcs)
Thrust Ball Bearings - 12x26x9 mm / 13 mm Grooved - Stainless Steel AISI 420C Bearing
Out of Stock | Backorder Now | Orders can be expected around Sun, Sep 21, 2025
$418.05 AUD
$773.64 AUD $418.05 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (d1)
12.000
mm

(Equiv. 0.472 in.)
OD (D1)
26.000
mm

(Equiv. 1.024 in.)
Thickness (T)
9.000
mm

(Equiv. 0.354 in.)
Bore (d2)
13.000
mm
Thrust Ball Bearings - 12x26x9 mm / 13 mm Grooved - Stainless Steel AISI 420C
Material: Stainless Steel AISI 420C    OD (D2): 26.000 mm    Dynamic Load Capacity: 1570 kgf    Info: Chinese    Cage Type: AIS I 420 Stainless Steel   
Part Number: T-0120-0260-G-51101-S420-ECO (100 Pcs)
Thrust Ball Bearings - 12x26x9 mm / 13 mm Grooved - Stainless Steel AISI 420C Bearing
Out of Stock | Backorder Now | Orders can be expected around Sun, Sep 21, 2025
$418.05 AUD
$773.64 AUD $418.05 AUD
Per 100
Quantity Required

Backorder: Out of Stock.
Shaft Diameter (d1)
15.000
mm

(Equiv. 0.591 in.)
OD (D1)
32.000
mm

(Equiv. 1.26 in.)
Thickness (T)
12.000
mm

(Equiv. 0.472 in.)
Bore (d2)
17.000
mm
OD (D2)
32.000
mm
Dynamic Load Capacity
1494
kgf
Thrust Ball Bearings - 15x32x12 mm / 17 mm Grooved - Stainless Steel AISI 440C
Material: Stainless Steel AISI 440C    Info: Chinese    Cage Type: AIS I 440C Stainless Steel   
Part Number: T-0150-0320-G-51202-440C-ECO
Thrust Ball Bearings - 15x32x12 mm / 17 mm Grooved - Stainless Steel AISI 440C Bearing
87 Available Now | Further orders can be expected around Sun, Sep 21, 2025
$12.59 AUD
$12.59 AUD
Each
Quantity Required

87 Available Now. Backorder if more than 87.
Shaft Diameter (d1)
15.000
mm

(Equiv. 0.591 in.)
OD (D1)
32.000
mm

(Equiv. 1.26 in.)
Thickness (T)
12.000
mm

(Equiv. 0.472 in.)
Bore (d2)
17.000
mm
Thrust Ball Bearings - 15x32x12 mm / 17 mm Grooved - Stainless Steel AISI 440C
Material: Stainless Steel AISI 440C    OD (D2): 32.000 mm    Dynamic Load Capacity: 1494 kgf    Info: Chinese    Cage Type: AIS I 440C Stainless Steel   
Part Number: T-0150-0320-G-51202-440C-ECO
Thrust Ball Bearings - 15x32x12 mm / 17 mm Grooved - Stainless Steel AISI 440C Bearing
87 Available Now | Further orders can be expected around Sun, Sep 21, 2025
$12.59 AUD
$12.59 AUD
Each
Quantity Required

87 Available Now. Backorder if more than 87.