Balls - Fixture - Tungsten Carbide

Balls -> Fixture -> Tungsten Carbide

There are 2 products in the sub-categories of Balls - Fixture - Tungsten Carbide. Browse the Balls - Fixture - Tungsten Carbide products table.

This product group is not included in our range. Try the full range at Minibearings instead.

Category Details

A selection of Tungsten Carbide Fixture Balls. Tungsten Carbide RC 65-68

  • Fixture balls are precision components used in fixture design, tooling, and workholding applications.
  • Fixture balls, also known as locating balls or tooling balls, serve as reference points or contact points in fixtures and jigs to facilitate accurate positioning, alignment, and repeatability during machining, assembly, and inspection processes.
  • These balls are often mounted on fixtures, jigs, or workholding systems using various mounting methods, such as threaded, press-fit, or magnetic mounting.
  • Ball and shank are concentric within 5 microns (0.0002 in.) TIR.
  • Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Miniature Bearings Australia - MBA Minibearings

Additional resources:


A more concise listing may be found in the Balls - Fixture - Tungsten Carbide category on the Small Parts & Bearings online store.
Diameter (A) Shank Diameter (C) Base to Centre (B) Indicative
Image
Diameter (A)
6.350
mm
+/- 0.0013
(Equiv. 0.25 in.)
Shank Diameter (C)
3.167
mm
+/- 0.1270
(Equiv. 0.125 in.)
Base to Centre (B)
14.224
mm
+/- 0.0076
(Equiv. 0.56 in.)
Fixture Balls - 6.35x3.167x14.224 mm - Tungsten Carbide
Material: Tungsten Carbide   
Part Number: BFX-00635-TC
Fixture Balls - 6.35x3.167x14.224 mm - Tungsten Carbide Ball
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$212.41 AUD
$212.41 AUD
Excludes GST and overseas Taxes & Duties
Each
Quantity Required

Backorder: Out of Stock.
Diameter (A) Shank Diameter (C) Base to Centre (B) Indicative
Image
Diameter (A)
6.350
mm
+/- 0.0013
(Equiv. 0.25 in.)
Shank Diameter (C)
3.167
mm
+/- 0.1270
(Equiv. 0.125 in.)
Base to Centre (B)
14.224
mm
+/- 0.0076
(Equiv. 0.56 in.)
Fixture Balls - 6.35x3.167x14.224 mm - Tungsten Carbide
Material: Tungsten Carbide   
Part Number: BFX-00635-TC
Fixture Balls - 6.35x3.167x14.224 mm - Tungsten Carbide Ball
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$212.41 AUD
$212.41 AUD
Excludes GST and overseas Taxes & Duties
Each
Quantity Required

Backorder: Out of Stock.
Diameter (A)
9.525
mm
+/- 0.0013
(Equiv. 0.375 in.)
Shank Diameter (C)
4.755
mm
+/- 0.1270
(Equiv. 0.187 in.)
Base to Centre (B)
19.050
mm
+/- 0.0076
(Equiv. 0.75 in.)
Fixture Balls - 9.525x4.755x19.05 mm - Tungsten Carbide
Material: Tungsten Carbide   
Part Number: BFX-00953-TC
Fixture Balls - 9.525x4.755x19.05 mm - Tungsten Carbide Ball
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$188.59 AUD
$226.31 AUD $188.59 AUD
Excludes GST and overseas Taxes & Duties
Each
Quantity Required

Backorder: Out of Stock.
Diameter (A)
9.525
mm
+/- 0.0013
(Equiv. 0.375 in.)
Shank Diameter (C)
4.755
mm
+/- 0.1270
(Equiv. 0.187 in.)
Base to Centre (B)
19.050
mm
+/- 0.0076
(Equiv. 0.75 in.)
Fixture Balls - 9.525x4.755x19.05 mm - Tungsten Carbide
Material: Tungsten Carbide   
Part Number: BFX-00953-TC
Fixture Balls - 9.525x4.755x19.05 mm - Tungsten Carbide Ball
Out of Stock | Backorder Now | Orders can be expected around Mon, Oct 06, 2025
$188.59 AUD
$226.31 AUD $188.59 AUD
Excludes GST and overseas Taxes & Duties
Each
Quantity Required

Backorder: Out of Stock.