latches pull categories


Latches Quarter Turn


Latches - 1-4 Turn - Simple
Latches - 1-4 Turn - Simple

With 5.08mm offset cam. Cam may be reversed for increased grip range. Includes detent in body which signals positive open or closed position.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - 1-4 Turn - Simple.

Latches - 1-4 Turn -Tee Handle - Non Locking
Latches - 1-4 Turn -Tee Handle - Non Locking

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - 1-4 Turn -Tee Handle - Non Locking.

Latches Other


Catches - Straight Loop
Catches - Straight Loop

High strength overcentre catch and strike. Economical and compact. Available in plain steel, zinc plated or 304 stainless steel. With or without mounting holes. Strike is included. Dimensions are as mounted.

Tension can be increased by increasing distance between catch and strike.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Straight Loop.

Latches Compression


Latches - Compression - Lift and Turn - Straight Handle
Latches - Compression - Lift and Turn - Straight Handle

Lift handle to relax compression and then turn to open. Handle and sleeve are die cast zinc with either polished chrome or black powder coat finish.

Comes with mounting hardware. Max working load 44kg. M5 mounting screws supplied. For panels thicker than 6.35mm a longer screw and lockwasher combination will be required.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Compression - Lift and Turn - Straight Handle.

Latches Draw


Latches - Draw - Over Centre - 300 Grade Stainless Steel
Latches - Draw - Over Centre - 300 Grade Stainless Steel

Passivated stainless steel. Latches mount with M4 screws, No. 8 screws or 5/32 rivets. Type B keeper uses a countersunk screw.

Keepers included. Type SC-97533 has a hole for a padlock.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Draw - Over Centre - 300 Grade Stainless Steel.

Latches - Draw - T-Handle - Stainless Steel
Latches - Draw - T-Handle - Stainless Steel

Black rubber T Handle with stainless steel bracket and keeper. Shipped assembled. Installs with 4.8mm rivets (3/16 in.) or 10 Gauge Screws. Can be welded. Keeper included.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Draw - T-Handle - Stainless Steel.

Latches Other


Latches - 110 Series - Adjustable Grip
Latches - 110 Series - Adjustable Grip

Ultimate strength 145kg. Working strength 120kg.

Strike needs to be ordered separately.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - 110 Series - Adjustable Grip.

Latches - 200 Series - Heavy Duty
Latches - 200 Series - Heavy Duty

Ultimate strength 660kg. Working strength 265kg.

Heavy Duty.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - 200 Series - Heavy Duty.

Latches Rotary Action


Latches - Rotary Action - Link Lock - Keepers
Latches - Rotary Action - Link Lock - Keepers

Required for link lock rotary action latches. Match keeper with correct latch from selection.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Rotary Action - Link Lock - Keepers.

Latches - Rotary Action - Link Lock - Rivetted - Stainless
Latches - Rotary Action - Link Lock - Rivetted - Stainless

Lift and rotate wing to operate.

Keepers not included and must be purchased separately.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Rotary Action - Link Lock - Rivetted - Stainless.

Latches Slam Action


Latches - Slam Action - Slide
Latches - Slam Action - Slide

Fast snap in installation. Made from non-corrosive materials, black ABS plastic and stainless steel spring. Push to close latching.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Slam Action - Slide.

Latches Other


Handles - Tee
Handles - Tee

Zinc plated steel 7.94mm (5/16in.) square shank.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Handles - Tee.

Latches Handle


Handles - Latching - Padlocking
Handles - Latching - Padlocking

Zinc finished iron/steel construction. Has 5/16in. Square shank.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Handles - Latching - Padlocking.

Latches Other


Keys - Tubular - For Latches
Keys - Tubular - For Latches

Tubular key to suit the key operated latches linked from inside this category.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Keys - Tubular - For Latches.

Latches Handle


Handles - Latching - Cab Locks
Handles - Latching - Cab Locks

Zinc finished steel. Accepts 5/16 in. square shank. Inside handle, right or left hand. Picture shown is right hand.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Handles - Latching - Cab Locks.

Latches Other


Strikes - Toggle Latch - Steel
Strikes - Toggle Latch - Steel

Used with toggle latches series 800, 802, 803 and 806


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Strikes - Toggle Latch - Steel.

Latches Handle


Handles - Latching - L-Handle - Locking
Handles - Latching - L-Handle - Locking

Chrome finished zinc die-cast construction. 360o handle rotation. Comes with gasket. All locks are keyed alike. Keys included. May be used with rod kit for 2 point locking.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Handles - Latching - L-Handle - Locking.

Handles - Latching - T-Handle - Folding
Handles - Latching - T-Handle - Folding

Also see combined categories:
All T Handles

Gold zinc finished steel. Die cast construction. 5/16in. Square shank. 360o rotation. Blind mount. Padlockable.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Handles - Latching - T-Handle - Folding.

Handles - Latching - T-Handle - Locking
Handles - Latching - T-Handle - Locking

Also see combined categories:
All T Handles

90o clockwise rotation. Made of weatherable black nylon handle and steel parts. Includes one key. All locks keyed alike. May be used with rod kit for 2 point locking.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Handles - Latching - T-Handle - Locking.

Latches Other


Strikes - Toggle Latch - Stainless Steel
Strikes - Toggle Latch - Stainless Steel

Used with toggle latches series 800, 802, 803 and 806


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Strikes - Toggle Latch - Stainless Steel.

Latching Handles - Outside Door - Heavy Duty
Latching Handles - Outside Door - Heavy Duty

Black Glass Filled Polyamide Bezel, catch and Plug. Brass Shaft. Zinc plated mild steel fixing.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latching Handles - Outside Door - Heavy Duty.

Latches Handle


Handles - Latching - 2-Point Locking Rod Kit
Handles - Latching - 2-Point Locking Rod Kit

Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Handles - Latching - 2-Point Locking Rod Kit.

You may also like

Catches


Catches - Draw Pull
Catches - Draw Pull

Draw pull catches are available in either steel or 304 stainless. Strike is included.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Draw Pull.

Pins Pull


Pins - Pull - Round Handle - Aluminium and Steel
Pins - Pull - Round Handle - Aluminium and Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Round Handle - Aluminium and Steel.

Pins - Pull - Round Handle - Stainless Steel
Pins - Pull - Round Handle - Stainless Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Round Handle - Stainless Steel.

Pins - Pull - Round Handle - Steel
Pins - Pull - Round Handle - Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Round Handle - Steel.

Pins - Pull - Tee Handle - Aluminium and Steel
Pins - Pull - Tee Handle - Aluminium and Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Tee Handle - Aluminium and Steel.

Pins - Pull - Tee Handle - Stainless Steel
Pins - Pull - Tee Handle - Stainless Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Tee Handle - Stainless Steel.

Pins - Pull - Tee Handle - Steel
Pins - Pull - Tee Handle - Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Tee Handle - Steel.

Pins - Pull - Threaded End - Aluminium and Steel
Pins - Pull - Threaded End - Aluminium and Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Threaded End - Aluminium and Steel.

Pins - Pull - Threaded End - Stainless Steel
Pins - Pull - Threaded End - Stainless Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Threaded End - Stainless Steel.

Pins - Pull - Threaded End - Steel
Pins - Pull - Threaded End - Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Threaded End - Steel.

Plungers Indexing


Plungers - Indexing - Pull Knob - 303 Stainless
Plungers - Indexing - Pull Knob - 303 Stainless

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - 303 Stainless.

Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut
Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut.

Plungers - Indexing - Pull Knob - 303 Stainless - With Locking Slot
Plungers - Indexing - Pull Knob - 303 Stainless - With Locking Slot

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - 303 Stainless - With Locking Slot.

Plungers - Indexing - Pull Knob - 303 Stainless - With Nut
Plungers - Indexing - Pull Knob - 303 Stainless - With Nut

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - 303 Stainless - With Nut.

Plungers - Indexing - Pull Knob - Full 303 Stainless
Plungers - Indexing - Pull Knob - Full 303 Stainless

Also see combined categories:
All Indexing Plungers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - Full 303 Stainless.

Plungers - Indexing - Pull Knob - Full 303 Stainless - Locking Slot and Nut
Plungers - Indexing - Pull Knob - Full 303 Stainless - Locking Slot and Nut

Also see combined categories:
All Indexing Plungers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - Full 303 Stainless - Locking Slot and Nut.

Plungers - Indexing - Pull Knob - Full 303 Stainless - With Locking Slot
Plungers - Indexing - Pull Knob - Full 303 Stainless - With Locking Slot

Also see combined categories:
All Indexing Plungers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - Full 303 Stainless - With Locking Slot.

Plungers - Indexing - Pull Knob - Full 303 Stainless - With Nut
Plungers - Indexing - Pull Knob - Full 303 Stainless - With Nut

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - Full 303 Stainless - With Nut.

Plungers - Indexing - Pull Knob - No Collar - 303 Stainless
Plungers - Indexing - Pull Knob - No Collar - 303 Stainless

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - No Collar - 303 Stainless.

Plungers - Indexing - Pull Knob - No Collar - 303 Stainless - With Nut
Plungers - Indexing - Pull Knob - No Collar - 303 Stainless - With Nut

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - No Collar - 303 Stainless - With Nut.

Plungers - Indexing - Pull Knob - No Collar - Full 303 Stainless
Plungers - Indexing - Pull Knob - No Collar - Full 303 Stainless

Also see combined categories:
All Indexing Plungers

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - No Collar - Full 303 Stainless.

Plungers - Indexing - Pull Knob - No Collar - Full 303 Stainless - With Nut
Plungers - Indexing - Pull Knob - No Collar - Full 303 Stainless - With Nut

Also see combined categories:
All Indexing Plungers

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - No Collar - Full 303 Stainless - With Nut.

Plungers - Indexing - Pull Knob - No Collar - Steel
Plungers - Indexing - Pull Knob - No Collar - Steel

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - No Collar - Steel.

Plungers - Indexing - Pull Knob - No Collar - Steel - With Nut
Plungers - Indexing - Pull Knob - No Collar - Steel - With Nut

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - No Collar - Steel - With Nut.

Plungers - Indexing - Pull Knob - Steel
Plungers - Indexing - Pull Knob - Steel

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - Steel.

Plungers - Indexing - Pull Knob - Steel - With Locking Slot
Plungers - Indexing - Pull Knob - Steel - With Locking Slot

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - Steel - With Locking Slot.

Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut
Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut.

Plungers - Indexing - Pull Knob - Steel - With Nut
Plungers - Indexing - Pull Knob - Steel - With Nut

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - Steel - With Nut.

Plungers Spring


Plungers - Spring - Pull Ring - Locking - Stainless-Acetal
Plungers - Spring - Pull Ring - Locking - Stainless-Acetal

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Pull Ring - Locking - Stainless-Acetal.

Plungers - Spring - Pull Ring - Locking - Steel-Acetal
Plungers - Spring - Pull Ring - Locking - Steel-Acetal

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Pull Ring - Locking - Steel-Acetal.

Plungers - Spring - Pull Ring - Non Locking - Stainless-Acetal
Plungers - Spring - Pull Ring - Non Locking - Stainless-Acetal

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Pull Ring - Non Locking - Stainless-Acetal.

Plungers - Spring - Pull Ring - Non Locking - Steel-Acetal
Plungers - Spring - Pull Ring - Non Locking - Steel-Acetal

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Pull Ring - Non Locking - Steel-Acetal.

Plungers Indexing


Washers - for Indexing Pull Knobs
Washers - for Indexing Pull Knobs

The washer is slid beneath the disengaged pull knob so that the follower pins engage in the slot.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - for Indexing Pull Knobs.

Hoist Rings


Rings - Hoist - Side Pull - External Wrench Mount
Rings - Hoist - Side Pull - External Wrench Mount

Also see combined categories:
All Hoist Rings

Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.

Convenient installation with external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Hoist - Side Pull - External Wrench Mount.

Rings - Hoist - Side Pull - Full Swivel
Rings - Hoist - Side Pull - Full Swivel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Extra large diameter ring allows for large hook. Made of alloy steel with black oxide finish. Safety factor of 5 to 1.

Individually pull tested and certified.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Hoist - Side Pull - Full Swivel.

Rings - Hoist - Side Pull - Internal-External Wrench Mount
Rings - Hoist - Side Pull - Internal-External Wrench Mount

Also see combined categories:
All Hoist Rings

Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.

Convenient installation with internal or external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Hoist - Side Pull - Internal-External Wrench Mount.

Catches


Catches - Knuckle
Catches - Knuckle

Strong and light polyacetal and polyamide. Holds cabinets secure with 7kg of pull force.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Knuckle.

Tools Pullers


Tools - Pullers - Dowel Remover and Setter
Tools - Pullers - Dowel Remover and Setter

Also see combined categories:
All Tools

Designed for removing and setting any pull dowel up to 25.40mm.

Puller studs are threaded into the pull dowel and puller. Upward hammering motion with the slide handle is used to remove the dowel and a downward motion is used to set.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Pullers - Dowel Remover and Setter.

Hoist Rings


Rings - Hoist - Stationary - Without Screws
Rings - Hoist - Stationary - Without Screws

Also see combined categories:
All Hoist Rings

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Hoist - Stationary - Without Screws.

Rings - Hoist - Stationary - With Screws
Rings - Hoist - Stationary - With Screws

Also see combined categories:
All Hoist Rings

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rings - Hoist - Stationary - With Screws.

Tooling Balls


Balls - Tooling - Two Piece - Construction - Steel
Balls - Tooling - Two Piece - Construction - Steel

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 1144 steel heat treated to 53-57 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft. Construction balls can be pulled into a hole or bushing from below without applying pressure on the ball by using a cap screw in the internally tapped shank.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - Two Piece - Construction - Steel.

Thread Inserts


Inserts - Rivet Nuts - Klik - Ribbed
Inserts - Rivet Nuts - Klik - Ribbed

Also see combined categories:
All Klik Rivet Nuts

Individual Inserts for use with the Klik Thread Setter Tool

These blind threaded inserts offer strong torque and pull out characteristics. Especially effective in sheet metal and other thin material. Insert is placed into the hole in the parent material and crimped up with the installation tool. Installs from one side - no tapping required. Installs almost flush eliminating the need for countersinking. Made from plated steel.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Rivet Nuts - Klik - Ribbed.

Lifting Chain


Chain - Grade 50 Lifting - 316L Stainless Steel
Chain - Grade 50 Lifting - 316L Stainless Steel

Also see combined categories:
All Lifing Chain

Commonly used for commercial and marine applications. Approved for lifting.

Working loads are based on gradual pull not shock loads. Ensure all components in your assembly are overhead lifting rated and have the same working loads.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Chain - Grade 50 Lifting - 316L Stainless Steel.

Catches


Catches - Snap In Style - Grabber -tm-
Catches - Snap In Style - Grabber -tm-

Fast economical installation.

Fits frames from 1.1 to 7.1mm thick. Installation hole size 15mm x 39.9mm. Push to close and pull to open. Spring loaded over centre action. Corrosion resistant black ABS with 303 stainless steel spring.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Snap In Style - Grabber -tm-.

Rod Ends Studded


Rod Ends - Steel - Studded - Swaged Construction - Female
Rod Ends - Steel - Studded - Swaged Construction - Female

Also see combined categories:
All Female Rod Ends with Stud

Designed for heavy duty service, they come with dirt shield to provide protection against contaminants.

Unique assembly swages metal to retain the ball in cavity resulting in increased pull out and wear resistance. Ball studs are surface hardened. Made of low carbon steel, plated and dichromate treated.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod Ends - Steel - Studded - Swaged Construction - Female.

Handles


Handles - Adjustable - Stud
Handles - Adjustable - Stud

Adjustable Handles with Stud

Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with steel stud. These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the stud remains stationary. Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Handles - Adjustable - Stud.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122770 products in 2709 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.