Nuts Lock Categories


Category Matches

Nuts Lock

TopHide Pictures

Nuts - Hexagonal - Locking
Nuts - Hexagonal - Locking

Search Rating: 100%

Also see combined categories:
All Lock Nuts

By applying torque to the locking screw, a press fit or wave spring effect is created locking female threads of the locknut to the male threads of the shaft.

Produces a strong metal to metal lock. Locking set screws do not protrude through the face of the threads of the locknut, eliminating damage to shaft.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Nuts - Hexagonal - Locking.

Nuts - Aerotight
Nuts - Aerotight

Search Rating: 100%

Also see combined categories:
All Lock Nuts

Aerotight is a Registered Trademark and can only be applied to goods manufactured by the Premier Screw and Repetition Company Limited. Any company infringing the registered trade mark may be liable to legal proceedings. Aerotight nuts should not be used on damaged or interrupted threads. When assembled on the screw at least two threads should protrude through the Aerotight nut. Advantages: Will not work loose. No other locking device needed.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Nuts - Aerotight.

Nuts - Quick Release
Nuts - Quick Release

Search Rating: 99%

Also see combined categories:
All Lock Nuts

UNC

Carbon steel, black oxide finish. Button Thread nuts allow quick fixturing on long thread lengths. Simply press the button and the threads are disengaged to allow easy movement up or down the screw. Release the button and the threads engage for normal turning.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Nuts - Quick Release.

Nuts - Hexagonal - Binx - Steel
Nuts - Hexagonal - Binx - Steel

Search Rating: 99%

Also see combined categories:
All Lock Nuts

The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Nuts - Hexagonal - Binx - Steel.

Nuts - Hexagonal - Weld - Steel
Nuts - Hexagonal - Weld - Steel

Search Rating: 99%

Also see combined categories:
All Lock Nuts

Used in metalwork or for leveling appliances. Round or slab base. Material thickness is the thickness of the flange.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Nuts - Hexagonal - Weld - Steel.

Nuts - Hexagonal - Nylon Insert - Aluminium
Nuts - Hexagonal - Nylon Insert - Aluminium

Search Rating: 99%

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Nuts - Hexagonal - Nylon Insert - Aluminium. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Nuts - Hexagonal - Nylon Insert - Aluminium.

Nuts - Hexagonal - Nylon Insert - Brass
Nuts - Hexagonal - Nylon Insert - Brass

Search Rating: 99%

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Nuts - Hexagonal - Nylon Insert - Brass.

Nuts - Hexagonal - Nylon Insert - Steel
Nuts - Hexagonal - Nylon Insert - Steel

Search Rating: 99%

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Nuts - Hexagonal - Nylon Insert - Steel.

Nuts - Hexagonal - Nylon Insert - Stainless Steel
Nuts - Hexagonal - Nylon Insert - Stainless Steel

Search Rating: 99%

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Nuts - Hexagonal - Nylon Insert - Stainless Steel.

Nuts Lock for Bearings

TopHide Pictures

Nuts - Lock - For Bearings - Face
Nuts - Lock - For Bearings - Face

Search Rating: 68%

Also see combined categories:
All Lock Nuts for Bearings


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Nuts - Lock - For Bearings - Face.

Nuts - Lock - For Bearings - Peripheral
Nuts - Lock - For Bearings - Peripheral

Search Rating: 68%

Also see combined categories:
All Lock Nuts for Bearings


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Nuts - Lock - For Bearings - Peripheral.

Plungers Indexing

TopHide Pictures

Nuts - Lock - For Indexing Plungers
Nuts - Lock - For Indexing Plungers

Search Rating: 63%


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Nuts - Lock - For Indexing Plungers.

Shock Absorbers

TopHide Pictures

Shock Absorbers - Lock Nuts
Shock Absorbers - Lock Nuts

Search Rating: 62%

Also see combined categories:
All Shock Absorbers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shock Absorbers - Lock Nuts.

Springs Disc

TopHide Pictures

Washers - Disc Spring - Flange Locking Type
Washers - Disc Spring - Flange Locking Type

Search Rating: 60%

Also see combined categories:
All Disc Springs

Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock. Also known as belleville washers.

The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Disc Spring - Flange Locking Type.

Plungers Indexing

TopHide Pictures

Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut
Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut

Search Rating: 59%

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut.

Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut
Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut

Search Rating: 59%

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut.

Plungers - Indexing - Pull Knob - Full 303 Stainless - Locking Slot and Nut
Plungers - Indexing - Pull Knob - Full 303 Stainless - Locking Slot and Nut

Search Rating: 59%

Also see combined categories:
All Indexing Plungers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Pull Knob - Full 303 Stainless - Locking Slot and Nut.

Plungers - Indexing - Grip - Stainless - With Nut
Plungers - Indexing - Grip - Stainless - With Nut

Search Rating: 56%

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Grip - Stainless - With Nut.

Plungers - Indexing - Grip - Stainless - Without Nut
Plungers - Indexing - Grip - Stainless - Without Nut

Search Rating: 56%

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Grip - Stainless - Without Nut.

Plungers - Indexing - Grip - Steel - With Nut
Plungers - Indexing - Grip - Steel - With Nut

Search Rating: 56%

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Grip - Steel - With Nut.

Plungers - Indexing - Grip - Steel - Without Nut
Plungers - Indexing - Grip - Steel - Without Nut

Search Rating: 56%

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Grip - Steel - Without Nut.

Latches Quarter Turn

TopHide Pictures

Latches - 1-4 Turn -Tee Handle - Locking
Latches - 1-4 Turn -Tee Handle - Locking

Search Rating: 56%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - 1-4 Turn -Tee Handle - Locking.

Clamps

TopHide Pictures

Clamp Kits - Timing Belt
Clamp Kits - Timing Belt

Search Rating: 56%

Used for locking the ends of timing belt lengths used in linear applications

Suits single sided belts only. Aluminium. Screws, hex nuts and washers included.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Clamp Kits - Timing Belt.

Latches Quarter Turn

TopHide Pictures

Latches - 1-4 Turn - L Handle - Key Locking - Padlockable
Latches - 1-4 Turn  - L Handle - Key Locking - Padlockable

Search Rating: 56%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black powder coating. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - 1-4 Turn - L Handle - Key Locking - Padlockable.

Latches - 1-4 Turn -Tee Handle - Non Locking
Latches - 1-4 Turn -Tee Handle - Non Locking

Search Rating: 55%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - 1-4 Turn -Tee Handle - Non Locking.

Shaftloc

TopHide Pictures

Shaftloc-tm Sleeves - Single Ended
Shaftloc-tm Sleeves - Single Ended

Search Rating: 53%

Also see combined categories:
All Shaftloc

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shaftloc-tm Sleeves - Single Ended.

Plungers Indexing

TopHide Pictures

Plungers - Indexing - Cam Action - With Hex Nut
Plungers - Indexing - Cam Action - With Hex Nut

Search Rating: 51%

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Cam Action - With Hex Nut.

Plungers - Indexing - Cam Action - Without Hex Nut
Plungers - Indexing - Cam Action - Without Hex Nut

Search Rating: 51%

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Cam Action - Without Hex Nut.

Screws Panel

TopHide Pictures

Screws - Panel - Jack - Steel
Screws - Panel - Jack - Steel

Search Rating: 49%

Also see combined categories:
All Panel Screws

Female 4-40 UNC thread in head allows for secure fixing of studs to a panel.

Each screw comes with two flat washers, 1one lock washer and one hex nut. Yellow chromate zinc finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Panel - Jack - Steel.

Latches Cabinet

TopHide Pictures

Latches - Cabinet - Low Profile
Latches - Cabinet - Low Profile

Search Rating: 47%

Designed mainly for use on light cabinet doors and panels. A distinctive snap lets user know the latch is fully open or closed. Plug barrel and hex nuts are zinc diecast.

Cam, lock washer and screw are made from steel with a nickel plated finish. Hex type accepts 6.35mm (1/4 inch) hex tool. For use on panels up to 6.35mm (1/4 in.) thick. Straight cams.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Cabinet - Low Profile.

Latches Quarter Turn

TopHide Pictures

Latches - 1-4 Turn -L Handle - Coin Proof Slotted
Latches - 1-4 Turn -L Handle - Coin Proof Slotted

Search Rating: 45%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black diecast. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible. The slot is recessed so it's inaccessible to a coin, but can be turned with a screwdriver to lock and unlock the handle. For more security there is provision to use a padlock.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - 1-4 Turn -L Handle - Coin Proof Slotted.

Washers Lock

TopHide Pictures

Washers - Lock - Tabbed - Heavy Duty
Washers - Lock - Tabbed - Heavy Duty

Search Rating: 38%

Also see combined categories:
All Tabbed Lock Washers
All Lock Washers

Heavy duty WH / TW Series for bearing locknuts.

Carbon spring steel. Use with NH series locknuts.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Lock - Tabbed - Heavy Duty.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 120804 products in 2842 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.