Latches Other Categories


Category Matches

Latches Other

TopHide Pictures

Latches - L Handle - Locking
Latches - L Handle - Locking

Search Rating: 100%

Black polyamide and clear coated zinc

Includes key. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - L Handle - Locking.

Latches - L Handle - Non Locking
Latches - L Handle - Non  Locking

Search Rating: 100%

Black polyamide and clear coated zinc

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - L Handle - Non Locking.

Catches - Straight Loop
Catches - Straight Loop

Search Rating: 100%

High strength overcentre catch and strike. Economical and compact. Available in plain steel, zinc plated or 304 stainless steel. With or without mounting holes. Strike is included. Dimensions are as mounted.

Tension can be increased by increasing distance between catch and strike.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Catches - Straight Loop.

Latches - Pawl - 1-4 Turn
Latches - Pawl - 1-4 Turn

Search Rating: 99%

An ideal fastener for gasketed doors and access panels subject to wide thickness or misalignment tolerances.

Grip length is variable from 3.2mm to 36.5mm and is set by rotating the centre spindle. Latch can be opened with a quarter turn of the outer ring. Steel with black plastic outer ring. Installation hole diameter 19.43mm. Instructions included. Panel thickness from 1.2 to 3.2mm max. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Pawl - 1-4 Turn.

Latches - Vise Action - Compression
Latches - Vise Action - Compression

Search Rating: 99%

Easy to install. Locks doors then pulls them tight with one half turn. Internal oring gasket provides constant compression. Maximum working load 44kg. Black powder coated die cast zinc housing with black knobs or caps.

Easy to install. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Vise Action - Compression.

Latches - Vise Action - Compression - Keylocking
Latches - Vise Action - Compression - Keylocking

Search Rating: 99%

Easy to install. Locks doors then pulls them tight with one half turn. Internal oring gasket provides constant compression. Maximum working load 44kg. Black powder coated die cast zinc housing with black knobs or caps.

Easy to install. Key needs to be ordered separately. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Vise Action - Compression - Keylocking.

Latches - Railroad Style - 1-4 Turn - Padlockable
Latches - Railroad Style - 1-4 Turn - Padlockable

Search Rating: 99%

Zinc diecast black powder coating with slotted insert

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Railroad Style - 1-4 Turn - Padlockable.

Latches - Arrowhead
Latches - Arrowhead

Search Rating: 99%

Arrow designates position of the pawl. Spring loaded pawl creates slight pressure against frame to eliminate rattles and movement.

Simple one hole installation. Spacers supplied for various panel thicknesses.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Arrowhead.

Latches - Gate
Latches - Gate

Search Rating: 99%

304 Stainless Steel with satin finish, gate latches are designed to accommodate a padlock (not included).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Gate.

Latches - Swell
Latches - Swell

Search Rating: 99%

Latches in any frame thickness, blind application, glass or plastic. Latches accommodate misalignment between door and frame.

Black nylon handle and nut. Black rubber bushing provides sound deadening effect. When handle is lifted bushing diameter decreases allowing it to pass through the hole in the frame to unlatch the door.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Swell.

Latches - Toolbox
Latches - Toolbox

Search Rating: 99%

Zinc finished steel accepts 7.94mm (5/16in.) square shank.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Toolbox.

Latches - Cup - Flush
Latches - Cup - Flush

Search Rating: 99%

Polished stainless steel cup and bracket. Handle is diecast zinc, chrome plated. Set grip during installation. Includes mounting studs, mounting nuts and lockwashers. Grip range 27.7 to 39.6mm.

Max working load 44kg. Ultimate load 110kg. Turns clockwise to latch.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Cup - Flush.

Latches - Flush Recessed
Latches - Flush Recessed

Search Rating: 99%

Single, double or triple point assemblies. Latches are available in bright chrome plated or matte black finish with a key lock option. Max working load 22kg. Ultimate load 70kg. Rods for two and three point assemblied must be ordered separately.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Flush Recessed.

Latches - Hidden Panel
Latches - Hidden Panel

Search Rating: 99%

For near edge applications. Provides clean, unblemished panel surfaces. Push the panel to latch. Floating keeper option includes U-bent washer to assist alignment of hinged panels.

Stud of floating keeper will float 4mm of total movement. Steel latch with stainless steel spring and white thermoplastic actuator button.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Hidden Panel.

Latches - Keylocking - Cam
Latches - Keylocking - Cam

Search Rating: 99%

90o cam rotation. Zinc alloy die cast housing and cylinder. Five disc tumblers. Stainless steel bezel.

Offset and straight cam types included in this category. Simple brass keys are keyed alike.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Keylocking - Cam.

Latches - Knob Handle
Latches - Knob Handle

Search Rating: 99%

Black powder coated die cast zinc. Maximum working load 66kg. Average ultimate load 150kg.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Knob Handle.

Latches - L-Handle
Latches - L-Handle

Search Rating: 99%

Bright chrome. With or without lock. Turn clockwise to latch. Average ultimate load is 185 kg.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - L-Handle.

Latches - Snap Slide
Latches - Snap Slide

Search Rating: 99%

Used for attaching subplates and assemblies. The sliding bar is attached to the removable panel and the post is mounted to the stationary support.

In the closed position the spring action of the bar resists opening under vibration and shock load. The removable panel thickness must be between 1.2 and 4.0mm. Spacers may be needed and are included with each latch. The post can be attached with rivets, screw and nut or wood screw. Each comes with post and bar assembly. Made from zinc plated steel with chromate finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Snap Slide.

Latches - Spring Loaded
Latches - Spring Loaded

Search Rating: 99%

Steel construction with either black enamel or chrome finish. 90o or straight mounting options. Keeper included.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Spring Loaded.

Latches - Tubular Keylocking
Latches - Tubular Keylocking

Search Rating: 99%

Black powder coated die cast zinc. Maximum working load 66kg. Average ultimate load 150kg.

Key needs to be ordered separately.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Tubular Keylocking.

Latches - Vise Action - Compression - Knob Style - Keylocking
Latches - Vise Action - Compression - Knob Style - Keylocking

Search Rating: 99%

Easy to install. Locks doors then pulls them tight with one half turn. Internal oring gasket provides constant compression. Maximum working load 44kg. Black powder coated die cast zinc housing with black knobs or caps.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Vise Action - Compression - Knob Style - Keylocking.

Latches - 400 Series - Miniature
Latches - 400 Series - Miniature

Search Rating: 98%

Locked Tension 13.3 Kg


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - 400 Series - Miniature.

Latches - Recessed - Link Lock
Latches - Recessed - Link Lock

Search Rating: 98%

Recessed dish latch and catch are zinc plated steel. Utilises spring loaded link lock latch.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Recessed - Link Lock.

Latches - Spring - Knob Style
Latches - Spring - Knob Style

Search Rating: 98%

Smooth latching action. Camming action of spring pawl provides wide grip ranges. Black nylon with stainless steel spring. Hosuing is bright chromate zinc alloy plated steel with sealer. Designed to be riveted or screwed in place.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Spring - Knob Style.

Latches - Toggle - 800 Series
Latches - Toggle - 800 Series

Search Rating: 98%

Ultimate strength 310kg. Working strength 44kg. Pull Up Ability 152mm.

Strikes need to be ordered separately if required.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Toggle - 800 Series.

Latches - Toggle - 802 Series
Latches - Toggle - 802 Series

Search Rating: 98%

Ultimate strength 310kg. Working strength 44kg. Pull Up Ability 152mm.

Strikes need to be ordered separately if required.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Toggle - 802 Series.

Latches - Toggle - 803 Series
Latches - Toggle - 803 Series

Search Rating: 98%

Ultimate Strength 98kg. Working Strength 20kg. Pull Up Ability 50mm

Strikes need to be ordered separately if required.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Toggle - 803 Series.

Latches - Toggle - 806 Series
Latches - Toggle - 806 Series

Search Rating: 98%

Ultimate Strength 98kg. Working Strength 20kg. Pull Up Ability 50mm

Strikes need to be ordered separately if required.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Toggle - 806 Series.

Latches - Toggle - Adjustable Grip
Latches - Toggle - Adjustable Grip

Search Rating: 98%

Adjustable grip. Ultimate strength 350kg. Working strength 260kg.

These adjustable grip toggle latches allow you to easily adjust both the grip length and lock tensions. The optional secondary latch prevents accidental opening. Made from cold rolled steel. Zinc plated with a bright chromate finish. Strikes need to be purchased separately.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Toggle - Adjustable Grip.

Handles - Tee
Handles - Tee

Search Rating: 98%

Zinc plated steel 7.94mm (5/16in.) square shank.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Handles - Tee.

Latches - 110 Series - Adjustable Grip
Latches - 110 Series - Adjustable Grip

Search Rating: 98%

Ultimate strength 145kg. Working strength 120kg.

Strike needs to be ordered separately.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - 110 Series - Adjustable Grip.

Latches - 200 Series - Adjustable Grip
Latches - 200 Series - Adjustable Grip

Search Rating: 98%

Ultimate strength 355kg. Working strength 265kg.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - 200 Series - Adjustable Grip.

Latches - 200 Series - Heavy Duty
Latches - 200 Series - Heavy Duty

Search Rating: 98%

Ultimate strength 660kg. Working strength 265kg.

Heavy Duty.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - 200 Series - Heavy Duty.

Latches - Barrel Bolts - 304 Stainless
Latches - Barrel Bolts - 304 Stainless

Search Rating: 98%

Barrel bolt, body and plates are made from 304 stainless steel. Bolt and knob are nickel plated brass. Simply lift the knob, slide it over and drop it into notch for secure latching.

Saitn finish. Attractive and ideal for corrosive environments.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Barrel Bolts - 304 Stainless.

Latches - Panel Fastener - Butt Joint
Latches - Panel Fastener - Butt Joint

Search Rating: 98%

Progressively draws panels together. Helps provide airtight or water tight seal. Adjustability for manufacturing tolerances and gasket shrinkages. Receptacle needs to be purchased separately.

Uses 8mm hex to actuate. Bright chromate dipped, zinc plated carbon steel. Ultimate tensile load 625kg. Ultimate shear load 890kg.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Panel Fastener - Butt Joint.

Latches - Radial - Pin - Push Key
Latches - Radial - Pin - Push Key

Search Rating: 98%

Includes key


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Radial - Pin - Push Key.

Latches - Tension - Versa Latch - Steel
Latches - Tension - Versa Latch - Steel

Search Rating: 98%

Torsion springs compensate for application irregularities. Easy to grasp handle design. Zinc plated carbon steel with bright chromate dip.

Keepers sold separately - see linked category.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Tension - Versa Latch - Steel.

Latches - Vantage Downunder - Concealed Base
Latches - Vantage Downunder - Concealed Base

Search Rating: 98%

Under centre latch adjusts up to 25mm (1 inch). Padlock or secondary catch option. Kick out feature moves unlatched hook from keeper.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Vantage Downunder - Concealed Base.

Latches - Vantage Downunder - Exposed Base
Latches - Vantage Downunder - Exposed Base

Search Rating: 98%

Under centre latch adjusts up to 25mm (1 inch). Padlock or secondary catch option. Kick out feature moves unlatched hook from keeper.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Vantage Downunder - Exposed Base.

Keys - Tubular - For Latches
Keys - Tubular - For Latches

Search Rating: 98%

Tubular key to suit the key operated latches linked from inside this category.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Keys - Tubular - For Latches.

Latches - Tension - Versa Latch - 300 Grade Stainless Steel
Latches - Tension - Versa Latch - 300 Grade Stainless Steel

Search Rating: 98%

Torsion springs compensate for application irregularities. Easy to grasp handle design. Passivated type 300 grade stainless steel.

Keepers sold separately - see linked category.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Tension - Versa Latch - 300 Grade Stainless Steel.

Keys - for Latches - 1-4 Turn
Keys - for Latches - 1-4 Turn

Search Rating: 97%

Replacement keys for quarter turn latches


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Keys - for Latches - 1-4 Turn.

Strikes - Toggle Latch - Steel
Strikes - Toggle Latch - Steel

Search Rating: 97%

Used with toggle latches series 800, 802, 803 and 806


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Strikes - Toggle Latch - Steel.

Latch Accessories - 1-4 Turn
Latch Accessories - 1-4 Turn

Search Rating: 97%

Finger pull and hooked cams


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latch Accessories - 1-4 Turn.

Strikes - Toggle Latch - Stainless Steel
Strikes - Toggle Latch - Stainless Steel

Search Rating: 97%

Used with toggle latches series 800, 802, 803 and 806


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Strikes - Toggle Latch - Stainless Steel.

Latching Handles - Outside Door - Heavy Duty
Latching Handles - Outside Door - Heavy Duty

Search Rating: 96%

Black Glass Filled Polyamide Bezel, catch and Plug. Brass Shaft. Zinc plated mild steel fixing.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latching Handles - Outside Door - Heavy Duty.

Latches Paddle

TopHide Pictures

Latches - Paddle
Latches - Paddle

Search Rating: 61%

Push to close latch accommodates left or right side latching. Corrosion resistant polycarbonate / ABS black resin housing and paddle. Paddle serves as door handle.

Quick easly installation into 36.8mm x 84.6mm rectangular hole. Lock plug is glass reinforced acetal with brass wafers. Other parts are glass reinforced nylon. Key lockable with locked/unlocked indicator. Keys are brass. Two 4.2x1.4mm self tapping screws supplied. Total grip left or right is 6.35mm. Max working load 50kg.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Paddle.

Latches Compression

TopHide Pictures

Latches - Compression - Vise-Action - T-Handle - Non Locking
Latches - Compression - Vise-Action - T-Handle - Non Locking

Search Rating: 41%

Black powder coated die cast zinc. Max working load 67kg. Average ultimate load 150kg.

Catches are reversible allowing for an extended grip range.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Latches - Compression - Vise-Action - T-Handle - Non Locking.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 120906 products in 2842 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.