About Us Brands Download Contact Counter Sales Distributors FAQ Freight Payments Products Search Site Technical More Links...

Handles Categories


Category Matches

Handles

TopHide Pictures

Handles - Adjustable - Stud
Handles - Adjustable - Stud

Search Rating: 100%

Adjustable Handles with Stud

Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with steel stud. These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the stud remains stationary. Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Handles - Adjustable - Stud on Small Parts and Bearings.

Latches

TopHide Pictures

Handles - Latching - 2-Point Locking Rod Kit
Handles - Latching - 2-Point Locking Rod Kit

Search Rating: 59%

Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Handles - Latching - 2-Point Locking Rod Kit on Small Parts and Bearings.

Handles - Latching - Cab Locks
Handles - Latching - Cab Locks

Search Rating: 59%

Zinc finished steel. Accepts 5/16 in. square shank. Inside handle, right or left hand. Picture shown is right hand.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Handles - Latching - Cab Locks on Small Parts and Bearings.

Handles - Latching - L-Handle - Locking
Handles - Latching - L-Handle - Locking

Search Rating: 59%

Chrome finished zinc die-cast construction. 360o handle rotation. Comes with gasket. All locks are keyed alike. Keys included. May be used with rod kit for 2 point locking.

Related Information:



The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Handles - Latching - L-Handle - Locking on Small Parts and Bearings.

Handles - Latching - Padlocking
Handles - Latching - Padlocking

Search Rating: 59%

Zinc finished iron/steel construction. Has 5/16in. Square shank.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Handles - Latching - Padlocking on Small Parts and Bearings.

Handles - Latching - T-Handle - Folding
Handles - Latching - T-Handle - Folding

Search Rating: 59%

Also see combined categories:
All T Handles

Gold zinc finished steel. Die cast construction. 5/16in. Square shank. 360o rotation. Blind mount. Padlockable.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Handles - Latching - T-Handle - Folding on Small Parts and Bearings.

Handles - Latching - T-Handle - Locking
Handles - Latching - T-Handle - Locking

Search Rating: 59%

Also see combined categories:
All T Handles

90o clockwise rotation. Made of weatherable black nylon handle and steel parts. Includes one key. All locks keyed alike. May be used with rod kit for 2 point locking.

Related Information:



The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Handles - Latching - T-Handle - Locking on Small Parts and Bearings.

Handles - Tee
Handles - Tee

Search Rating: 59%

Zinc plated steel 7.94mm (5/16in.) square shank.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Handles - Tee on Small Parts and Bearings.

Latching Handles - Outside Door - Heavy Duty
Latching Handles - Outside Door - Heavy Duty

Search Rating: 58%

Black Glass Filled Polyamide Bezel, catch and Plug. Brass Shaft. Zinc plated mild steel fixing.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latching Handles - Outside Door - Heavy Duty on Small Parts and Bearings.

Latches - Knob Handle
Latches - Knob Handle

Search Rating: 58%

Black powder coated die cast zinc. Maximum working load 66kg. Average ultimate load 150kg.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - Knob Handle on Small Parts and Bearings.

Latches - Wing Handle - Locking - Black Polyamide
Latches - Wing Handle - Locking - Black Polyamide

Search Rating: 58%

Also see combined categories:
All Wing Handle Latches

Includes Key ELH-333

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:



The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - Wing Handle - Locking - Black Polyamide on Small Parts and Bearings.

Latches - Wing Handle - Locking - Black Powder Coat
Latches - Wing Handle - Locking - Black Powder Coat

Search Rating: 58%

Also see combined categories:
All Wing Handle Latches

Includes Key ELH-333

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:



The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - Wing Handle - Locking - Black Powder Coat on Small Parts and Bearings.

Latches - Wing Handle - Locking - Chrome
Latches - Wing Handle - Locking - Chrome

Search Rating: 58%

Also see combined categories:
All Wing Handle Latches

Includes Key ELH-333

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:



The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - Wing Handle - Locking - Chrome on Small Parts and Bearings.

Latches - Wing Handle - Non Locking - Black Polyamide
Latches - Wing Handle - Non Locking - Black Polyamide

Search Rating: 58%

Also see combined categories:
All Wing Handle Latches

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - Wing Handle - Non Locking - Black Polyamide on Small Parts and Bearings.

Pins - Clevis

TopHide Pictures

Pins - Clevis - Handle - Bent
Pins - Clevis - Handle - Bent

Search Rating: 58%

Also see combined categories:
All Clevis Pins with Handle
All Clevis Pins

Also known as Hitch Pins. Heat treated.

Bent at a 15o angle.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Clevis - Handle - Bent on Small Parts and Bearings.

Pins - Clevis - Handle - Straight - Plain
Pins - Clevis - Handle - Straight - Plain

Search Rating: 58%

Also see combined categories:
All Clevis Pins with Handle
All Clevis Pins

Also known as Hitch Pins. Heat treated.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Clevis - Handle - Straight - Plain on Small Parts and Bearings.

Pins - Clevis - Handle - Straight - Powder Coated
Pins - Clevis - Handle - Straight - Powder Coated

Search Rating: 58%

Also see combined categories:
All Clevis Pins with Handle
All Clevis Pins

Also known as Hitch Pins. Heat treated.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Clevis - Handle - Straight - Powder Coated on Small Parts and Bearings.

Cross Blocks

TopHide Pictures

Joints - Swivel - Tee Handle - Steel
Joints - Swivel - Tee Handle - Steel

Search Rating: 58%

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Joints - Swivel - Tee Handle - Steel on Small Parts and Bearings.

Plungers Indexing

TopHide Pictures

Plungers - Indexing - Large Handle
Plungers - Indexing - Large Handle

Search Rating: 58%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Extra large fluted handle for quick and easy plunger retraction. Can be fully retracted into the body by pulling up on the handle. Handle is black thermoplastic. Body and pin are steel with black oxide finish.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Large Handle on Small Parts and Bearings.

Plungers Spring

TopHide Pictures

Plungers - Spring - Acetal Handle - Locking - Stainless
Plungers - Spring - Acetal Handle - Locking - Stainless

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

White acetal plastic handle . 303 stainless steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Acetal Handle - Locking - Stainless on Small Parts and Bearings.

Plungers - Spring - Acetal Handle - Locking - Steel
Plungers - Spring - Acetal Handle - Locking - Steel

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Black acetal plastic handle . Black oxide coated steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Acetal Handle - Locking - Steel on Small Parts and Bearings.

Plungers - Spring - Acetal Handle - Non Locking - Stainless
Plungers - Spring - Acetal Handle - Non Locking - Stainless

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

White acetal plastic handle . 303 stainless steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Acetal Handle - Non Locking - Stainless on Small Parts and Bearings.

Plungers - Spring - Acetal Handle - Non Locking - Steel
Plungers - Spring - Acetal Handle - Non Locking - Steel

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Black acetal plastic handle . Black oxide coated steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Acetal Handle - Non Locking - Steel on Small Parts and Bearings.

Plungers - Spring - Knurled Handle - Locking - Stainless
Plungers - Spring - Knurled Handle - Locking - Stainless

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Knurled Handle - Locking - Stainless on Small Parts and Bearings.

Plungers - Spring - Knurled Handle - Locking - Stainless-Acetal
Plungers - Spring - Knurled Handle - Locking - Stainless-Acetal

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Knurled Handle - Locking - Stainless-Acetal on Small Parts and Bearings.

Plungers - Spring - Knurled Handle - Locking - Stainless-Phenolic
Plungers - Spring - Knurled Handle - Locking - Stainless-Phenolic

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Knurled Handle - Locking - Stainless-Phenolic on Small Parts and Bearings.

Plungers - Spring - Knurled Handle - Locking - Steel
Plungers - Spring - Knurled Handle - Locking - Steel

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Knurled Handle - Locking - Steel on Small Parts and Bearings.

Plungers - Spring - Knurled Handle - Locking - Steel-Acetal
Plungers - Spring - Knurled Handle - Locking - Steel-Acetal

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Knurled Handle - Locking - Steel-Acetal on Small Parts and Bearings.

Plungers - Spring - Knurled Handle - Locking - Steel-Phenolic
Plungers - Spring - Knurled Handle - Locking - Steel-Phenolic

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Knurled Handle - Locking - Steel-Phenolic on Small Parts and Bearings.

Plungers - Spring - Knurled Handle - Non Locking - Stainless
Plungers - Spring - Knurled Handle - Non Locking - Stainless

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Knurled Handle - Non Locking - Stainless on Small Parts and Bearings.

Plungers - Spring - Knurled Handle - Non Locking - Steel
Plungers - Spring - Knurled Handle - Non Locking - Steel

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Knurled Handle - Non Locking - Steel on Small Parts and Bearings.

Plungers - Spring - Ring Handle - Locking - Stainless
Plungers - Spring - Ring Handle - Locking - Stainless

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Ring Handle - Locking - Stainless on Small Parts and Bearings.

Plungers - Spring - Ring Handle - Locking - Stainless-Phenolic
Plungers - Spring - Ring Handle - Locking - Stainless-Phenolic

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Ring Handle - Locking - Stainless-Phenolic on Small Parts and Bearings.

Plungers - Spring - Ring Handle - Locking - Steel
Plungers - Spring - Ring Handle - Locking - Steel

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Ring Handle - Locking - Steel on Small Parts and Bearings.

Plungers - Spring - Ring Handle - Locking - Steel-Phenolic
Plungers - Spring - Ring Handle - Locking - Steel-Phenolic

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Ring Handle - Locking - Steel-Phenolic on Small Parts and Bearings.

Plungers - Spring - Ring Handle - Non Locking - Stainless
Plungers - Spring - Ring Handle - Non Locking - Stainless

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Ring Handle - Non Locking - Stainless on Small Parts and Bearings.

Plungers - Spring - Ring Handle - Non Locking - Stainless-Phenolic
Plungers - Spring - Ring Handle - Non Locking - Stainless-Phenolic

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Ring Handle - Non Locking - Stainless-Phenolic on Small Parts and Bearings.

Plungers - Spring - Ring Handle - Non Locking - Steel
Plungers - Spring - Ring Handle - Non Locking - Steel

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Ring Handle - Non Locking - Steel on Small Parts and Bearings.

Plungers - Spring - Ring Handle - Non Locking - Steel-Phenolic
Plungers - Spring - Ring Handle - Non Locking - Steel-Phenolic

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Ring Handle - Non Locking - Steel-Phenolic on Small Parts and Bearings.

Plungers - Spring - Tee Handle - Locking - Stainless
Plungers - Spring - Tee Handle - Locking - Stainless

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Tee Handle - Locking - Stainless on Small Parts and Bearings.

Plungers - Spring - Tee Handle - Locking - Steel
Plungers - Spring - Tee Handle - Locking - Steel

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Tee Handle - Locking - Steel on Small Parts and Bearings.

Pins - Pull

TopHide Pictures

Pins - Pull - Round Handle - Aluminium and Steel
Pins - Pull - Round Handle - Aluminium and Steel

Search Rating: 58%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Round Handle - Aluminium and Steel on Small Parts and Bearings.

Pins - Pull - Round Handle - Stainless Steel
Pins - Pull - Round Handle - Stainless Steel

Search Rating: 58%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Round Handle - Stainless Steel on Small Parts and Bearings.

Pins - Pull - Round Handle - Steel
Pins - Pull - Round Handle - Steel

Search Rating: 58%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Round Handle - Steel on Small Parts and Bearings.

Pins - Pull - Tee Handle - Aluminium and Steel
Pins - Pull - Tee Handle - Aluminium and Steel

Search Rating: 58%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Tee Handle - Aluminium and Steel on Small Parts and Bearings.

Pins - Pull - Tee Handle - Stainless Steel
Pins - Pull - Tee Handle - Stainless Steel

Search Rating: 58%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Tee Handle - Stainless Steel on Small Parts and Bearings.

Pins - Pull - Tee Handle - Steel
Pins - Pull - Tee Handle - Steel

Search Rating: 58%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Pull - Tee Handle - Steel on Small Parts and Bearings.

Latches

TopHide Pictures

Latches - Compression - Wing
Latches - Compression - Wing

Search Rating: 57%

Handles and housings are black powder coated zinc alloy. If handle is a locking type it is supplied with one ELH-333 key.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:



The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - Compression - Wing on Small Parts and Bearings.

Plungers Spring

TopHide Pictures

Plungers - Spring - Hex Drive Handle - Locking - Steel
Plungers - Spring - Hex Drive Handle - Locking - Steel

Search Rating: 57%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Hex Drive Handle - Locking - Steel on Small Parts and Bearings.

Pins - Ball Lock

TopHide Pictures

Pins - Ball Lock - Ball Handle - Plastic Handle
Pins - Ball Lock - Ball Handle - Plastic Handle

Search Rating: 57%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins. Also called detent pins.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - Ball Handle - Plastic Handle on Small Parts and Bearings.

Pins - Ball Lock - Button Handle - Commercial
Pins - Ball Lock - Button Handle - Commercial

Search Rating: 57%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed. Also called detent pins.

Economical. Aluminium handles. 360 Brass Button. 300 Grade stainless pin. Use industrial grade T handled pins when higher double shear strength is required.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - Button Handle - Commercial on Small Parts and Bearings.

Pins - Ball Lock - Button Handle - Stainless Steel
Pins - Ball Lock - Button Handle - Stainless Steel

Search Rating: 57%

Also see combined categories:
All Ball Lock Pins - Non Marine

17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise. Also called detent pins.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - Button Handle - Stainless Steel on Small Parts and Bearings.

Pins - Ball Lock - Button Handle - Steel
Pins - Ball Lock - Button Handle - Steel

Search Rating: 57%

Also see combined categories:
All Ball Lock Pins - Non Marine

Heat treated 4130 alloy spindle and shank. Handles aluminium. Also called detent pins.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - Button Handle - Steel on Small Parts and Bearings.

Latches

TopHide Pictures

Latches - 1-4 Turn -Tee Handle - 304 Stainless Steel - Blank - Non-Locking
Latches - 1-4 Turn -Tee Handle - 304 Stainless Steel - Blank - Non-Locking

Search Rating: 57%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - 1-4 Turn -Tee Handle - 304 Stainless Steel - Blank - Non-Locking on Small Parts and Bearings.

Latches - 1-4 Turn -Tee Handle - 316 Stainless Steel - Non-Locking
Latches - 1-4 Turn -Tee Handle - 316 Stainless Steel - Non-Locking

Search Rating: 57%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - 1-4 Turn -Tee Handle - 316 Stainless Steel - Non-Locking on Small Parts and Bearings.

Latches - 1-4 Turn -Tee Handle - Locking
Latches - 1-4 Turn -Tee Handle - Locking

Search Rating: 57%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - 1-4 Turn -Tee Handle - Locking on Small Parts and Bearings.

Latches - 1-4 Turn -Tee Handle - Non Locking
Latches - 1-4 Turn -Tee Handle - Non Locking

Search Rating: 57%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - 1-4 Turn -Tee Handle - Non Locking on Small Parts and Bearings.

Latches - 1-4 Turn -Tee Handle with Pawl - Black Finish
Latches - 1-4 Turn -Tee Handle with Pawl - Black Finish

Search Rating: 57%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Includes lockable models where so marked. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - 1-4 Turn -Tee Handle with Pawl - Black Finish on Small Parts and Bearings.

Latches - 1-4 Turn -Tee Handle with Pawl - Chrome Finish
Latches - 1-4 Turn -Tee Handle with Pawl - Chrome Finish

Search Rating: 57%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Includes lockable models where so marked. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - 1-4 Turn -Tee Handle with Pawl - Chrome Finish on Small Parts and Bearings.

Latches - 1-4 Turn - Wing Handle with Pawl - Black Finish
Latches - 1-4 Turn  - Wing Handle with Pawl - Black Finish

Search Rating: 57%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Padlockable only on items so marked. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - 1-4 Turn - Wing Handle with Pawl - Black Finish on Small Parts and Bearings.

Latches - 1-4 Turn - Wing Handle with Pawl - Chrome Finish
Latches - 1-4 Turn  - Wing Handle with Pawl - Chrome Finish

Search Rating: 57%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - 1-4 Turn - Wing Handle with Pawl - Chrome Finish on Small Parts and Bearings.

Latches - Compression - L-Handle
Latches - Compression - L-Handle

Search Rating: 57%

Handles and housings are black powder coated zinc alloy. If handle is a locking type it is supplied with one ELH-333 key.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:



The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - Compression - L-Handle on Small Parts and Bearings.

Latches - Compression - T-Handle
Latches - Compression - T-Handle

Search Rating: 57%

Handles and housings are black powder coated zinc alloy. If handle is a locking type it is supplied with one ELH-333 key.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:



The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - Compression - T-Handle on Small Parts and Bearings.

Latches - Compression - Vibration Proof
Latches - Compression - Vibration Proof

Search Rating: 57%

Handles and housings are black powder coated zinc alloy.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - Compression - Vibration Proof on Small Parts and Bearings.

Latches - Compression - Lift and Turn - Hooked Handle
Latches - Compression - Lift and Turn - Hooked Handle

Search Rating: 56%

Lift handle to relax compression and then turn to open. Handle and sleeve are die cast zinc with either polished chrome or black powder coat finish.

Maximum panel thickness 5.95mm. Positioning pin assures proper latching.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - Compression - Lift and Turn - Hooked Handle on Small Parts and Bearings.

Latches - Compression - Lift and Turn - Straight Handle
Latches - Compression - Lift and Turn - Straight Handle

Search Rating: 56%

Lift handle to relax compression and then turn to open. Handle and sleeve are die cast zinc with either polished chrome or black powder coat finish.

Comes with mounting hardware. Max working load 44kg. M5 mounting screws supplied. For panels thicker than 6.35mm a longer screw and lockwasher combination will be required.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - Compression - Lift and Turn - Straight Handle on Small Parts and Bearings.

Pins - Ball Lock

TopHide Pictures

Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel
Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Ball Lock Pins - Non Marine

17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel. Also called detent pins.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel on Small Parts and Bearings.

Pins - Ball Lock - T-Handle - Plastic Handle
Pins - Ball Lock - T-Handle - Plastic Handle

Search Rating: 56%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins. Tee handle. Also called detent pins.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - T-Handle - Plastic Handle on Small Parts and Bearings.

Tools Threading

TopHide Pictures

Tools - Tap Wrenches
Tools - Tap Wrenches

Search Rating: 56%

Also see combined categories:
All Tools

Tee handle and bar types. Suit taps from 1mm to 12mm.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Tools - Tap Wrenches on Small Parts and Bearings.

Latches

TopHide Pictures

Latches - Cup - Flush
Latches - Cup - Flush

Search Rating: 55%

Polished stainless steel cup and bracket. Handle is diecast zinc, chrome plated. Set grip during installation. Includes mounting studs, mounting nuts and lockwashers. Grip range 27.7 to 39.6mm.

Max working load 44kg. Ultimate load 110kg. Turns clockwise to latch.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - Cup - Flush on Small Parts and Bearings.

Knobs Ball

TopHide Pictures

Knobs - Ball - Threaded - Lateral Grooved
Knobs - Ball - Threaded - Lateral Grooved

Search Rating: 54%

Also see combined categories:
All Female Threaded Ball Knobs

Moulded platic control ball handles for machine tools, jigs, fixtures etc.

Stylish grooves to assist with grip. Brass threaded insert.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Knobs - Ball - Threaded - Lateral Grooved on Small Parts and Bearings.

Plungers Spring

TopHide Pictures

Plungers - Spring - Threaded Adapter - Locking - Stainless
Plungers - Spring - Threaded Adapter - Locking - Stainless

Search Rating: 54%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Threaded Adapter - Locking - Stainless on Small Parts and Bearings.

Plungers - Spring - Threaded Adapter - Locking - Steel
Plungers - Spring - Threaded Adapter - Locking - Steel

Search Rating: 54%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Threaded Adapter - Locking - Steel on Small Parts and Bearings.

Plungers - Spring - Threaded Adapter - Non Locking - Stainless
Plungers - Spring - Threaded Adapter - Non Locking - Stainless

Search Rating: 54%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Threaded Adapter - Non Locking - Stainless on Small Parts and Bearings.

Plungers - Spring - Threaded Adapter - Non Locking - Steel
Plungers - Spring - Threaded Adapter - Non Locking - Steel

Search Rating: 54%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Spring - Threaded Adapter - Non Locking - Steel on Small Parts and Bearings.

Latches

TopHide Pictures

Latches - Tension - Versa Latch - Steel
Latches - Tension - Versa Latch - Steel

Search Rating: 53%

Torsion springs compensate for application irregularities. Easy to grasp handle design. Zinc plated carbon steel with bright chromate dip.

Keepers sold separately - see linked category.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - Tension - Versa Latch - Steel on Small Parts and Bearings.

Latches - Draw - Flexible - T-Handle - Non Conductive
Latches - Draw - Flexible - T-Handle - Non Conductive

Search Rating: 51%

No metal parts. UV resistant, self aligning. Inbuilt drag prevents handle flopping. Steady state clamp force 4.4kg. Mounts with M5 screws or 4.76mm (3/16 in.) rivets. Keeper included.

Thermoplastic elastomer.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - Draw - Flexible - T-Handle - Non Conductive on Small Parts and Bearings.

Latches - Tension - Versa Latch - 300 Grade Stainless Steel
Latches - Tension - Versa Latch - 300 Grade Stainless Steel

Search Rating: 51%

Torsion springs compensate for application irregularities. Easy to grasp handle design. Passivated type 300 grade stainless steel.

Keepers sold separately - see linked category.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - Tension - Versa Latch - 300 Grade Stainless Steel on Small Parts and Bearings.

Pins - Ball Lock

TopHide Pictures

Pins - Ball Lock - L-Handle - Industrial - Steel
Pins - Ball Lock - L-Handle - Industrial - Steel

Search Rating: 51%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring. Also called detent pins.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - L-Handle - Industrial - Steel on Small Parts and Bearings.

Pins - Ball Lock - Threaded End - Stainless Steel
Pins - Ball Lock - Threaded End - Stainless Steel

Search Rating: 51%

Also see combined categories:
All Ball Lock Pins with Threaded End

One end threaded so you can attach your own handle or knob. Also called detent pins.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - Threaded End - Stainless Steel on Small Parts and Bearings.

Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium
Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium

Search Rating: 50%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring. Tee handle. Also called detent pins.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium on Small Parts and Bearings.

Tools General Purpose

TopHide Pictures

Tools - General
Tools - General

Search Rating: 50%

Also see combined categories:
All Tools

Butane Torch, Inspection Mirror, Mini Sandblaster, Nibbling Tool, Plastic Scriber, Pick Up Tool Set, Hex Driver Handle for Insert Bits

X-Acto Knife Sets - Pin Vises - Screw Pitch Gauges and more.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Tools - General on Small Parts and Bearings.

Tools Threading

TopHide Pictures

Tools - Thread Repair
Tools - Thread Repair

Search Rating: 50%

Also see combined categories:
All Tools

Quickly repairs damaged screws

Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Tools - Thread Repair on Small Parts and Bearings.

Latches

TopHide Pictures

Latches - Swell
Latches - Swell

Search Rating: 50%

Latches in any frame thickness, blind application, glass or plastic. Latches accommodate misalignment between door and frame.

Black nylon handle and nut. Black rubber bushing provides sound deadening effect. When handle is lifted bushing diameter decreases allowing it to pass through the hole in the frame to unlatch the door.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - Swell on Small Parts and Bearings.

Pins - Ball Lock

TopHide Pictures

Pins - Ball Lock - L-Handle - Industrial - Stainless Steel
Pins - Ball Lock - L-Handle - Industrial - Stainless Steel

Search Rating: 49%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy. Also called detent pins.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - L-Handle - Industrial - Stainless Steel on Small Parts and Bearings.

Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium
Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium

Search Rating: 48%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy. Tee handle. Also called detent pins.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium on Small Parts and Bearings.

Latches

TopHide Pictures

Latches - Paddle
Latches - Paddle

Search Rating: 48%

Push to close latch accommodates left or right side latching. Corrosion resistant polycarbonate / ABS black resin housing and paddle. Paddle serves as door handle.

Quick easly installation into 36.8mm x 84.6mm rectangular hole. Lock plug is glass reinforced acetal with brass wafers. Other parts are glass reinforced nylon. Key lockable with locked/unlocked indicator. Keys are brass. Two 4.2x1.4mm self tapping screws supplied. Total grip left or right is 6.35mm. Max working load 50kg.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Latches - Paddle on Small Parts and Bearings.

Pins - Ball Lock

TopHide Pictures

Pins - Ball Lock - Shoulder Type - T Handle
Pins - Ball Lock - Shoulder Type - T Handle

Search Rating: 48%

Also see combined categories:
All Ball Lock Pins - Non Marine

Zinc plated C1144 pins with a shoulder that prevents the pin being inserted all the way to the handle. Tee handle. Also called detent pins.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - Shoulder Type - T Handle on Small Parts and Bearings.

Tools Threading

TopHide Pictures

Tools - Mandrels and Nosepieces - For Klik Rivet Nuts
Tools - Mandrels and Nosepieces - For Klik Rivet Nuts

Search Rating: 48%

Also see combined categories:
All Tools

Required for Thread Setter Tool

Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.

Related Information:



The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Tools - Mandrels and Nosepieces - For Klik Rivet Nuts on Small Parts and Bearings.

Pins - Ball Lock

TopHide Pictures

Pins - Ball Lock - T-Handle - Industrial - Stainless Steel
Pins - Ball Lock - T-Handle - Industrial - Stainless Steel

Search Rating: 47%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Body and spindle 17-4 PH stainless steel. Ring and spring 17-7 MO stainless steel. Handle and collar are 300 grade stainless. Tee handle. Also called detent pins.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - T-Handle - Industrial - Stainless Steel on Small Parts and Bearings.

Sets

TopHide Pictures

Tools - Sets - Foldup
Tools - Sets - Foldup

Search Rating: 46%

Also see combined categories:
All Tools

Handy sets of popular sized hex and torx wrenches.

Highest quality 8650 chrome nickel alloy heat treated and finished to resist rust. Ergo style has colour coded handles. Classic style has one piece steel grip handle. Conveniently folds up like a jack knife when not in use.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Tools - Sets - Foldup on Small Parts and Bearings.

Pins - Ball Lock

TopHide Pictures

Pins - Ball Lock - T-Handle - Commercial
Pins - Ball Lock - T-Handle - Commercial

Search Rating: 45%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed. Tee handle. Also called detent pins.

Economical. Aluminium handles. 360 Brass Button. 300 Grade stainless pin. Use industrial grade T handled pins when higher double shear strength is required.




The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - T-Handle - Commercial on Small Parts and Bearings.

Tools Pullers

TopHide Pictures

Tools - Pullers - Dowel Remover and Setter
Tools - Pullers - Dowel Remover and Setter

Search Rating: 44%

Also see combined categories:
All Tools

Designed for removing and setting any pull dowel up to 25.40mm.

Puller studs are threaded into the pull dowel and puller. Upward hammering motion with the slide handle is used to remove the dowel and a downward motion is used to set.

Related Information:



The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Tools - Pullers - Dowel Remover and Setter on Small Parts and Bearings.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



PRODUCTS

Accessories Air Springs Allthread Angle Assortments Backup Rings Ball Joints Ball Parallels Ball Screws Ball Splines Linear Ball Transfers Balls Bar Batteries Bearings Acetal Bearings Angular C... Bearings Ball Bearings Conveyor Bearings Grooved P... Bearings Housings Bearings Hydrodynamic Bearings Linear Bearings Mounted Bearings Needle Ro... Bearings One Way C... Bearings PEEK Bearings Pivot Bearings Plates Bearings Press In Bearings Scale Bearings Tapered R... Bearings Thrust Bearings and Housi... Bearings for Denta... Bearings for Housings Bearings for Skating Bearings for Wheel... Belts PosiDrive Belts Rounthane

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Books Bottles and Cans Brushless Motor Be... Bumpers Bungs Bushes Bronze Bushes Plastic Bushes Steel Bushings Spherical Cable Cable Ties Cam Followers Cams Carburettor Parts Carousels Castors Catches Ceramic Bearings Chain and Sprocket... Chain and Sprocket... Channel Circlips Clamping Bushings Clamping Rings Clamps Clevis Joints Clips Clutches Collars Collectibles Couplings Bellows Couplings Helical ... Couplings Insert a... Couplings Other Couplings Rigid Cross Blocks Dampers Dental Bearing Kits Dental Handpiece P... Disk Cleaning Machine

Visa Card Accepted
Visa
Secure Checkout


Drylin Bearings an... Dual Eye Joints Dual Vee Bearings Easy Selection Kits Educational Projects Enclosures Engineering and Ho... Eyebolts Fastening Bushings Fishing Reel Parts Flexible Shaft Food Processor Parts Framing Fuel Games Amusement Games General Gas Springs Gear Blanks Gear Racks Circula... Gear Racks Flexible Gearbox Output Shafts Gearbox Parts Gearboxes Cross Axis Gearboxes Educatio... Gearboxes Inline Gearboxes Inline E... Gearboxes Offset Gearboxes Right Angle Gearboxes Tee Gearheads Inline Gearmotors Basic Gearmotors DC Gearmotors Open Gears Cluster Gears Imperial Ant... Gears Imperial Bevel Gears Imperial Hel... Gears Imperial Int... Gears Imperial Mitre Gears Imperial Racks

Master Card Accepted
Mastercard
Secure Checkout


Gears Imperial Spur Gears Imperial Worms Gears Metric Bevel Gears Metric Helical Gears Metric Internal Gears Metric Mitre Gears Metric Racks Gears Metric Spira... Gears Metric Spira... Gears Metric Spur Gears Metric Stem Gears Metric Worms Handles Handpiece Parts Hobby Accessories Hobby Gears Hobby Servo Motors Hobby Wheels Hoist Rings Hooks Housings Linear w... Housings Linear w... Housings with Inte... Hubs ISOPADS Insulators Isolators Jigsaws Jockey Wheel Thrus... Keys Keys and Keysteel Knobs Ball Knobs Cabinet Knobs Cross Knobs Knurled Knobs Lever Knobs Lobe Knobs Mushroom Knobs Oval Knobs Precision

Pay By
Phone after Checkout
07 3275 2097
International +61 7 3275 2097


Knobs Round Knobs Star Knobs Thumb Knobs Tri Knobs Wing Lanyards Latches Lazy Susans Leadscrews Lifting Chain Lights Linear Slides Locking Compounds Lubricants General... MRI Table Bearings Magnets Alcomax Magnets Alnico Magnets Ceramic Magnets Cup Magnets Rare Earth Marking Measuring Equipment Measuring Gauges Medical Model Jet Turbine ... Motors DC Motors Stepper Motors Vibrating Mounts Base Mounts Bonded Mounts Centrebolt Mounts Conical Mounts Cup Mounts Cylindrical Mounts Leveling Mounts Machinery Mounts Plate Mounts Rectangular Mounts Wedge Nuts

Amex Accepted
Amex
Secure Checkout


Nuts Lock ORings ORings for Dental ... Oil Seals Packing Boxes and ... Parts Boxes Pillars Pinion Wire Imperial Pinion Wire Metric Pins Ball Lock Pins Clevis Pins Cotter Pins Dowel Pins General Pins Pull Pins Roll Pins Taper Pins Wirelock Pins Locating Plungers Ball Plungers Indexing Plungers Spring Positioning Power Tool Parts Pressure Rollers Protective Packing... Pulley Blocks Pulleys Grooved Pulleys Idler Pulleys Synchromesh Pulleys Vee Punches Pushbike Bearings Ratchets and Pawls Robotic Wheels Rod Ends Rollers Screws Button Head Screws Cap Head Screws Captive

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Screws Cheese Head Screws Coach Screws Countersunk Screws Hex Head Screws Large Head Screws Pan Head Screws Panel Screws Round Head Screws Security Screws Self Tapping Screws Shoulder Screws Socket Set ... Screws Square Head Screws Thumb Screws Wood Sealing Plugs Seals and Sealing Sets Shaft Extenders an... Shafting Aluminium Shafting General P... Shafting Precision... Shaftloc Sheet Shim Shock Absorbers Sleeves Snap Buttons Snaps Soldering Spacers Special Effects Li... Splined Shafts and... Spring Anchors Spring Mounts Spring Washers Spring Wire Springs Compression Springs Constant F... Springs Die

Visa Card Accepted
Visa
Secure Checkout


Springs Disc Springs Extension Springs General Springs Torsion Spur Gear Stock Im... Spur Gear Stock Me... Spur Gears Circula... Square Shaft Stationery Stays Steam Engine Parts Stops Spring Strip Strips Stroke Rotary Bush... Studs Suction Cups Surplus Stock Swimming Pool Bear... Switches Tape Tee Joints Tension Bushings Tensioners Thread Thread Inserts Threaded Rod Timing Belt Lengths Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P...

Master Card Accepted
Mastercard
Secure Checkout


Timing Belts and P... Tips Tolerance Rings Tooling Balls Tools Bending Tools Bits Tools Circlip Tools Cutting Tools Deburring Tools General Purpose Tools Measuring Tools Pullers Tools Screw Drivers Tools Screw Extrac... Tools Threading Tube and Tubing Turntables Universal Joints VRings Vacuum Cleaner Belts Vee Belts Washers Aligning Washers Finishing Washers Flat Fibre Washers Flat Metallic Washers Flat Plastic Washers Flat Rubber Washers General Washers Lock Washers Locking Washers Serrated L... Washers Shoulder Washers Square Washers Thrust Wear Strips Wheels Industrial Wrenches Yoke Ends

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 114250 products in 2802 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.