About Us Brands Download Contact Counter Sales Distributors FAQ Freight Payments Products Search Site Technical More Links...

Belts Flat Categories


Category Matches

Belts Posi-Drive

TopHide Pictures

Belts - Posi-Drive - 4.00 mm Circular Pitch - Double Core
Belts - Posi-Drive - 4.00 mm Circular Pitch - Double Core

Search Rating: 100%

Also see combined categories:
All Posi-Drive Belts

Same as US 20 Pitch - Use with Posi-Drive Sprockets.

Use Double Core with Posi-Drive Sprockets. 3.990mm Circular Pitch. Same as US 20 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Posi-Drive - 4.00 mm Circular Pitch - Double Core.

Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core
Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core

Search Rating: 100%

Also see combined categories:
All Posi-Drive Belts

Same as US 20 Pitch - Use with Posi-Drive Pulleys.

Use Single Core with Posi-Drive Pulleys. 3.990mm Circular Pitch. Same as US 20 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core.

Belts Rounthane

TopHide Pictures

Belts - Rounthane
Belts - Rounthane

Search Rating: 100%

Joinable belting. 88 Shore A hardness. Yellow colour. Temperature range -31 to 65 Deg C (-25 to 150 Deg F).

Join with Rounthane Connectors (purchased separately). Material : Non Slip Polyurethane. Use with grooved idler pulleys with diameters at least 8 times the belt width. Purchased per 305mm (1 foot). Orders for more than 1 foot will be supplied as a continuous length. FDA / USDA approved.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Rounthane.

Belts - Rounthane - Connectors
Belts - Rounthane - Connectors

Search Rating: 100%

Joinable belting connectors.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Rounthane - Connectors.

Vee Belts

TopHide Pictures

Belts - Vee - 10.0 x 5.5mm - M-3L
Belts - Vee - 10.0 x 5.5mm - M-3L

Search Rating: 100%

Also see combined categories:
All Vee Belts 8mm and 10mm Top Width

Miniature and small belts. 10.0mm Top Width x 5.5mm Height.

Sizes are nominal and may vary slightly. Items marked as Fractional Horsepower are designed for general purrpose low horseposer applications such as laundry machines, home workshop tools, small fans and blowers, garage equipment, small metal and woodworking tools etc. Belts shown as Fractional Horsepower type should not be used with reverse side idlers.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Vee - 10.0 x 5.5mm - M-3L.

Belts - Vee - 10.0 x 6.0mm - Z
Belts - Vee - 10.0 x 6.0mm - Z

Search Rating: 100%

Also see combined categories:
All Vee Belts 8mm and 10mm Top Width

Miniature and small belts. 10.0mm Top Width x 6.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Vee - 10.0 x 6.0mm - Z.

Belts - Vee - 12.5 x 9.0mm - A-4L
Belts - Vee - 12.5 x 9.0mm - A-4L

Search Rating: 100%

Also see combined categories:
All Vee Belts 12.5mm and 12.7mm Top Width

12.5mm Top Width x 9.0mm Height.

Sizes are nominal and may vary slightly. Items marked as Fractional Horsepower are designed for general purrpose low horseposer applications such as laundry machines, home workshop tools, small fans and blowers, garage equipment, small metal and woodworking tools etc. Belts shown as Fractional Horsepower type should not be used with reverse side idlers.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Vee - 12.5 x 9.0mm - A-4L.

Belts - Vee - 12.7 x 7.9mm - Notched AX
Belts - Vee - 12.7 x 7.9mm - Notched AX

Search Rating: 100%

Also see combined categories:
All Vee Belts 12.5mm and 12.7mm Top Width

12.7mm Top Width x 7.9mm Height.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Vee - 12.7 x 7.9mm - Notched AX.

Belts - Vee - 15.9 x 10.3mm - Notched BX
Belts - Vee - 15.9 x 10.3mm - Notched BX

Search Rating: 100%

Also see combined categories:
All Vee Belts 15.9mm and 16.5mm Top Width

15.9mm Top Width x 10.3mm Height.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Vee - 15.9 x 10.3mm - Notched BX.

Belts - Vee - 15.9 x 9.5mm - 5L
Belts - Vee - 15.9 x 9.5mm - 5L

Search Rating: 100%

Also see combined categories:
All Vee Belts 15.9mm and 16.5mm Top Width

15.9mm Top Width x 9.5mm Height.

Sizes are nominal and may vary slightly. Items marked as Fractional Horsepower are designed for general purrpose low horseposer applications such as laundry machines, home workshop tools, small fans and blowers, garage equipment, small metal and woodworking tools etc. Belts shown as Fractional Horsepower type should not be used with reverse side idlers.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Vee - 15.9 x 9.5mm - 5L.

Belts - Vee - 16.5 x 11.0mm - B
Belts - Vee - 16.5 x 11.0mm - B

Search Rating: 100%

Also see combined categories:
All Vee Belts 15.9mm and 16.5mm Top Width

16.5mm Top Width x 11.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Vee - 16.5 x 11.0mm - B.

Belts - Vee - 22.2 x 13.5mm - Notched CX
Belts - Vee - 22.2 x 13.5mm - Notched CX

Search Rating: 100%

Also see combined categories:
All Vee Belts 22mm and 22.2mm Top Width

22.2mm Top Width x 13.5mm Height.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Vee - 22.2 x 13.5mm - Notched CX.

Belts - Vee - 31.5 x 19.0mm - D
Belts - Vee - 31.5 x 19.0mm - D

Search Rating: 100%

31.5mm Top Width x 19.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Vee - 31.5 x 19.0mm - D.

Belts - Vee - 8.0 x 4.0mm
Belts - Vee -  8.0 x 4.0mm

Search Rating: 100%

Also see combined categories:
All Vee Belts 8mm and 10mm Top Width

Miniature and small belts. 8.0mm Top Width x 4.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Vee - 8.0 x 4.0mm.

Belts - Wedge - 12.7 x 10.0mm - SPA
Belts - Wedge - 12.7 x 10.0mm - SPA

Search Rating: 100%

Also see combined categories:
All Vee Belts 12.5mm and 12.7mm Top Width

12.7mm Top Width x 10.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Wedge - 12.7 x 10.0mm - SPA.

Belts - Wedge - 15.9 x 13.5mm - Notched 5VX
Belts - Wedge - 15.9 x 13.5mm - Notched 5VX

Search Rating: 100%

Also see combined categories:
All Vee Belts 15.9mm and 16.5mm Top Width

15.9mm Top Width x 13.5mm Height.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Wedge - 15.9 x 13.5mm - Notched 5VX.

Belts - Wedge - 16.3 x 13.0mm - SPB - 5V
Belts - Wedge - 16.3 x 13.0mm - SPB - 5V

Search Rating: 100%

Also see combined categories:
All Vee Belts 15.9mm and 16.5mm Top Width

16.3mm Top Width x 13.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Wedge - 16.3 x 13.0mm - SPB - 5V.

Belts - Wedge - 25.4 x 22.2mm - SPP-8V
Belts - Wedge - 25.4 x 22.2mm - SPP-8V

Search Rating: 100%

25.4mm Top Width x 22.2mm Height.

Sizes are nominal and may vary slightly.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Wedge - 25.4 x 22.2mm - SPP-8V.

Belts - Wedge - 9.5 x 7.9mm - Notched XPZ - 3VX
Belts - Wedge -  9.5 x 7.9mm - Notched XPZ - 3VX

Search Rating: 100%

Also see combined categories:
All Vee Pulleys M Section 10mm Top Width

Miniature and small belts. 9.5mm Top Width x 7.9mm Height.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Wedge - 9.5 x 7.9mm - Notched XPZ - 3VX.

Belts - Wedge - 9.7 x 8.0mm - SPZ - 3V
Belts - Wedge -  9.7 x 8.0mm - SPZ - 3V

Search Rating: 100%

Also see combined categories:
All Vee Pulleys M Section 10mm Top Width

Miniature and small belts. 9.7mm Top Width x 8.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Wedge - 9.7 x 8.0mm - SPZ - 3V.

Timing Belt Lengths

TopHide Pictures

Belts - Timing - Lengths
Belts - Timing - Lengths

Search Rating: 100%

Sold per meter - Refer diagrams in timing belt listings for aspects of various pitches.

Lengths of timing belt stock are used for reciprocating applications. Not meant to be joined. For easy ready selected sets of timing belts and pulleys please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - Lengths.

Timing Belts and Pulleys 1.0mm

TopHide Pictures

Belts - Timing - 1.000mm Pitch - T01M - 3mm Wide
Belts - Timing -  1.000mm Pitch - T01M - 3mm Wide

Search Rating: 100%

Also see combined categories:
All 1mm Pitch Timing Belts

Miniature 1mm series timing belts. 3mm Wide +/- 0.2mm

Pitch (P) - 1.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.41mm. Belt Height (W) - 0.97mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 1.000mm Pitch - T01M - 3mm Wide.

Timing Belts and Pulleys 1.5mm

TopHide Pictures

Belts - Timing - 1.500mm Pitch - TN150 Bando - 15mm Wide
Belts - Timing -  1.500mm Pitch - TN150 Bando - 15mm Wide

Search Rating: 100%

Also see combined categories:
All 1.5mm Pitch Timing Belts

TN150 Series Bando Timing Belts - Limited Range. Enquire for sizes not listed.

Pitch (P) - 1.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 1.500mm Pitch - TN150 Bando - 15mm Wide.

Timing Belts and Pulleys 10mm

TopHide Pictures

Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide

Search Rating: 100%

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide.

Timing Belts and Pulleys 12.7mm

TopHide Pictures

Belts - Timing - 12.700mm Pitch - H - 10mm Wide
Belts - Timing - 12.700mm Pitch - H - 10mm Wide

Search Rating: 100%

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. For easy ready selected sets of timing belts and pulleys please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 12.700mm Pitch - H - 10mm Wide.

Belts - Timing - 12.700mm Pitch - H - 15mm Wide
Belts - Timing - 12.700mm Pitch - H - 15mm Wide

Search Rating: 100%

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. For easy ready selected sets of timing belts and pulleys please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 12.700mm Pitch - H - 15mm Wide.

Timing Belts and Pulleys 2.032mm MXL

TopHide Pictures

Belts - Timing - 2.032mm Pitch - MXL - 3mm Wide
Belts - Timing -  2.032mm Pitch - MXL - 3mm Wide

Search Rating: 100%

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 3mm to 3.18mm (1/8 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 2.032mm Pitch - MXL - 3mm Wide.

Belts - Timing - 2.032mm Pitch - MXL - 4.76mm Wide
Belts - Timing -  2.032mm Pitch - MXL - 4.76mm Wide

Search Rating: 100%

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 4.5mm to 4.76mm (3/16 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 2.032mm Pitch - MXL - 4.76mm Wide.

Belts - Timing - 2.032mm Pitch - MXL - 6mm Wide
Belts - Timing -  2.032mm Pitch - MXL - 6mm Wide

Search Rating: 100%

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 6.0mm to 6.35mm (1/4 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 2.032mm Pitch - MXL - 6mm Wide.

Belts - Timing - 2.032mm Pitch - MXL - 8mm Wide
Belts - Timing -  2.032mm Pitch - MXL - 8mm Wide

Search Rating: 100%

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 8.0mm and 7.93mm (5/16 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 2.032mm Pitch - MXL - 8mm Wide.

Belts - Timing - 2.032mm Pitch - MXL - 9.5mm Wide
Belts - Timing -  2.032mm Pitch - MXL - 9.5mm Wide

Search Rating: 100%

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 9.5mm and 9.53mm (3/8 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 2.032mm Pitch - MXL - 9.5mm Wide.

Belts - Timing - 2.032mm Pitch - MXL - White - 3mm Wide
Belts - Timing -  2.032mm Pitch - MXL - White - 3mm Wide

Search Rating: 100%

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

PowerGrip(R) TruMotion(R) Timing Belts in 2.032mm or 0.080 inch pitch.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. TruMotion(R) belts have a durable wear surface for longer life and are RoHS compliant. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. RoHs comliant.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 2.032mm Pitch - MXL - White - 3mm Wide.

Belts - Timing - 2.032mm Pitch - MXL - White - 4.5mm Wide
Belts - Timing -  2.032mm Pitch - MXL - White - 4.5mm Wide

Search Rating: 100%

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

PowerGrip(R) TruMotion(R) Timing Belts 2.032mm or 0.080 inch pitch. Includes 3mm to 3.18mm (1/8 inch) widths +/- 0.2mm

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 2.032mm Pitch - MXL - White - 4.5mm Wide.

Timing Belts and Pulleys 2.073mm 40DP

TopHide Pictures

Belts - Timing - 2.073mm Pitch - 40DP - 3mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 3mm Wide

Search Rating: 100%

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 2.073mm Pitch - 40DP - 3mm Wide.

Belts - Timing - 2.073mm Pitch - 40DP - 4.5mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 4.5mm Wide

Search Rating: 100%

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 2.073mm Pitch - 40DP - 4.5mm Wide.

Belts - Timing - 2.073mm Pitch - 40DP - 6.0mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 6.0mm Wide

Search Rating: 100%

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 2.073mm Pitch - 40DP - 6.0mm Wide. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Belts - Timing - 2.073mm Pitch - 40DP - 6.0mm Wide.

Belts - Timing - 2.073mm Pitch - 40DP - 8.0mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 8.0mm Wide

Search Rating: 100%

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 2.073mm Pitch - 40DP - 8.0mm Wide.

Timing Belts and Pulleys 2.0mm

TopHide Pictures

Belts - Timing - 2.000mm Pitch - GT2 - 3mm Wide
Belts - Timing -  2.000mm Pitch - GT2 - 3mm Wide

Search Rating: 100%

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 2.000mm Pitch - GT2 - 3mm Wide.

Belts - Timing - 2.000mm Pitch - GT2 - 6mm Wide
Belts - Timing -  2.000mm Pitch - GT2 - 6mm Wide

Search Rating: 100%

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 2.000mm Pitch - GT2 - 6mm Wide.

Belts - Timing - 2.000mm Pitch - GT2 - 9mm Wide
Belts - Timing -  2.000mm Pitch - GT2 - 9mm Wide

Search Rating: 100%

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 2.000mm Pitch - GT2 - 9mm Wide.

Timing Belts and Pulleys 2.5mm

TopHide Pictures

Belts - Timing - 2.500mm Pitch - T2.5 - 10mm Wide
Belts - Timing -  2.500mm Pitch - T2.5 - 10mm Wide

Search Rating: 100%

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Pitch (P) - 2.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 2.500mm Pitch - T2.5 - 10mm Wide.

Belts - Timing - 2.500mm Pitch - T2.5 - 4mm Wide
Belts - Timing -  2.500mm Pitch - T2.5 - 4mm Wide

Search Rating: 100%

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Pitch (P) - 2.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 2.500mm Pitch - T2.5 - 4mm Wide.

Belts - Timing - 2.500mm Pitch - T2.5 - 6mm Wide
Belts - Timing -  2.500mm Pitch - T2.5 - 6mm Wide

Search Rating: 100%

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Pitch (P) - 2.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 2.500mm Pitch - T2.5 - 6mm Wide.

Timing Belts and Pulleys 3.0mm

TopHide Pictures

Belts - Timing - 3.000mm Pitch - GT2 - 15mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - 15mm Wide

Search Rating: 100%

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 3.000mm Pitch - GT2 - 15mm Wide.

Belts - Timing - 3.000mm Pitch - GT2 - 6mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - 6mm Wide

Search Rating: 100%

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 3.000mm Pitch - GT2 - 6mm Wide.

Belts - Timing - 3.000mm Pitch - GT2 - 9mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - 9mm Wide

Search Rating: 100%

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 3.000mm Pitch - GT2 - 9mm Wide.

Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 15mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - Double Sided - 15mm Wide

Search Rating: 100%

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 15mm Wide.

Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 6mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - Double Sided - 6mm Wide

Search Rating: 100%

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts Double Sided

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 6mm Wide.

Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 9mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - Double Sided - 9mm Wide

Search Rating: 100%

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts Double Sided

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 9mm Wide.

Belts - Timing - 3.000mm Pitch - HTD - 6mm Wide
Belts - Timing -  3.000mm Pitch - HTD - 6mm Wide

Search Rating: 100%

Also see combined categories:
All 3mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 3.000mm Pitch - HTD - 6mm Wide.

Belts - Timing - 3.000mm Pitch - HTD - 9mm Wide
Belts - Timing -  3.000mm Pitch - HTD - 9mm Wide

Search Rating: 100%

Also see combined categories:
All 3mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 3.000mm Pitch - HTD - 9mm Wide.

Belts - Timing - 3.000mm Pitch - HTD Double Sided - 6mm Wide
Belts - Timing -  3.000mm Pitch - HTD Double Sided - 6mm Wide

Search Rating: 100%

Also see combined categories:
All 3mm Pitch Timing Belts

HTD Series Metric Timing Belts Double Sided.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 3.000mm Pitch - HTD Double Sided - 6mm Wide.

Belts - Timing - 3.000mm Pitch - HTD Double Sided - 9mm Wide
Belts - Timing -  3.000mm Pitch - HTD Double Sided - 9mm Wide

Search Rating: 100%

Also see combined categories:
All 3mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 3.000mm Pitch - HTD Double Sided - 9mm Wide.

Timing Belts and Pulleys 5.08mm XL (1/5in)

TopHide Pictures

Belts - Timing - 5.080mm Pitch - XL -12mm Wide
Belts - Timing -  5.080mm Pitch - XL -12mm Wide

Search Rating: 100%

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch. 12mm or 12.7mm width.

Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.080mm Pitch - XL -12mm Wide.

Belts - Timing - 5.080mm Pitch - XL - 6mm Wide
Belts - Timing -  5.080mm Pitch - XL - 6mm Wide

Search Rating: 100%

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.080mm Pitch - XL - 6mm Wide.

Belts - Timing - 5.080mm Pitch - XL - 8mm Wide
Belts - Timing -  5.080mm Pitch - XL - 8mm Wide

Search Rating: 100%

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.080mm Pitch - XL - 8mm Wide. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Belts - Timing - 5.080mm Pitch - XL - 8mm Wide.

Belts - Timing - 5.080mm Pitch - XL - 9.5mm Wide
Belts - Timing -  5.080mm Pitch - XL - 9.5mm Wide

Search Rating: 100%

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.080mm Pitch - XL - 9.5mm Wide.

Belts - Timing - 5.080mm Pitch - XL Double Sided - 6mm Wide
Belts - Timing -  5.080mm Pitch - XL Double Sided - 6mm Wide

Search Rating: 100%

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.

Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.080mm Pitch - XL Double Sided - 6mm Wide.

Belts - Timing - 5.080mm Pitch - XL Double Sided - 8mm Wide
Belts - Timing -  5.080mm Pitch - XL Double Sided - 8mm Wide

Search Rating: 100%

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.

Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.080mm Pitch - XL Double Sided - 8mm Wide.

Belts - Timing - 5.080mm Pitch - XL Double Sided - 9.5mm Wide
Belts - Timing -  5.080mm Pitch - XL Double Sided - 9.5mm Wide

Search Rating: 100%

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.

Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.080mm Pitch - XL Double Sided - 9.5mm Wide.

Timing Belts and Pulleys 5.0mm

TopHide Pictures

Belts - Timing - 5.000mm Pitch - GT2 - 15mm Wide
Belts - Timing -  5.000mm Pitch - GT2 - 15mm Wide

Search Rating: 100%

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.000mm Pitch - GT2 - 15mm Wide.

Belts - Timing - 5.000mm Pitch - GT2 - 9mm Wide
Belts - Timing -  5.000mm Pitch - GT2 -  9mm Wide

Search Rating: 100%

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.000mm Pitch - GT2 - 9mm Wide.

Belts - Timing - 5.000mm Pitch - GT2 - Double Sided - 15mm Wide
Belts - Timing -  5.000mm Pitch - GT2 - Double Sided - 15mm Wide

Search Rating: 100%

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 Series Metric Timing Belts Double Sided

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 5.00mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.000mm Pitch - GT2 - Double Sided - 15mm Wide.

Belts - Timing - 5.000mm Pitch - GT2 - Double Sided - 9mm
Belts - Timing -  5.000mm Pitch - GT2 - Double Sided - 9mm

Search Rating: 100%

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 Series Metric Timing Belts Double Sided

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 5.00mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.000mm Pitch - GT2 - Double Sided - 9mm.

Belts - Timing - 5.000mm Pitch - HTD - 15mm Wide
Belts - Timing -  5.000mm Pitch - HTD - 15mm Wide

Search Rating: 100%

Also see combined categories:
All 5mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.000mm Pitch - HTD - 15mm Wide.

Belts - Timing - 5.000mm Pitch - HTD - 6mm Wide
Belts - Timing -  5.000mm Pitch - HTD -  6mm Wide

Search Rating: 100%

Also see combined categories:
All 5mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.000mm Pitch - HTD - 6mm Wide.

Belts - Timing - 5.000mm Pitch - HTD - 9mm Wide
Belts - Timing -  5.000mm Pitch - HTD -  9mm Wide

Search Rating: 100%

Also see combined categories:
All 5mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.000mm Pitch - HTD - 9mm Wide. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Belts - Timing - 5.000mm Pitch - HTD - 9mm Wide.

Belts - Timing - 5.000mm Pitch - HTD Double Sided -15mm Wide
Belts - Timing -  5.000mm Pitch - HTD Double Sided -15mm Wide

Search Rating: 100%

Also see combined categories:
All 5mm Pitch Timing Belts

HTD Series Metric Timing Belts Double Sided.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 5.30mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.000mm Pitch - HTD Double Sided -15mm Wide.

Belts - Timing - 5.000mm Pitch - HTD Double Sided - 6mm Wide
Belts - Timing -  5.000mm Pitch - HTD Double Sided - 6mm Wide

Search Rating: 100%

Also see combined categories:
All 5mm Pitch Timing Belts

HTD Series Metric Timing Belts Double Sided.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 5.30mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.000mm Pitch - HTD Double Sided - 6mm Wide.

Belts - Timing - 5.000mm Pitch - HTD Double Sided - 9mm Wide
Belts - Timing -  5.000mm Pitch - HTD Double Sided - 9mm Wide

Search Rating: 100%

Also see combined categories:
All 5mm Pitch Timing Belts

HTD Series Metric Timing Belts Double Sided.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 5.30mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.000mm Pitch - HTD Double Sided - 9mm Wide.

Belts - Timing - 5.000mm Pitch - T5 - 10mm Wide
Belts - Timing -  5.000mm Pitch - T5 - 10mm Wide

Search Rating: 100%

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.000mm Pitch - T5 - 10mm Wide.

Belts - Timing - 5.000mm Pitch - T5 - 15mm Wide
Belts - Timing -  5.000mm Pitch - T5 - 15mm Wide

Search Rating: 100%

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.000mm Pitch - T5 - 15mm Wide.

Belts - Timing - 5.000mm Pitch - T5 - 6mm Wide
Belts - Timing -  5.000mm Pitch - T5 -  6mm Wide

Search Rating: 100%

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 5.000mm Pitch - T5 - 6mm Wide.

Timing Belts and Pulleys 8.0mm

TopHide Pictures

Belts - Timing - 8.000mm Pitch - GT2 - 12mm Wide
Belts - Timing -  8.000mm Pitch - GT2 - 12mm Wide

Search Rating: 100%

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 Series Metric Timing Belts

Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 8.000mm Pitch - GT2 - 12mm Wide.

Timing Belts and Pulleys 9.525mm L (3/8in)

TopHide Pictures

Belts - Timing - 9.525mm Pitch - L - 12.5mm Wide
Belts - Timing -  9.525mm Pitch - L -  12.5mm Wide

Search Rating: 100%

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 9.525mm Pitch - L - 12.5mm Wide.

Belts - Timing - 9.525mm Pitch - L - 19mm Wide
Belts - Timing -  9.525mm Pitch - L -  19mm Wide

Search Rating: 100%

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 9.525mm Pitch - L - 19mm Wide.

Belts - Timing - 9.525mm Pitch - L - 25mm Wide
Belts - Timing -  9.525mm Pitch - L -  25mm Wide

Search Rating: 100%

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 9.525mm Pitch - L - 25mm Wide.

Belts - Timing - 9.525mm Pitch - L Double Sided -12.7mm
Belts - Timing -  9.525mm Pitch - L Double Sided -12.7mm

Search Rating: 100%

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 9.525mm Pitch - L Double Sided -12.7mm.

Belts - Timing - 9.525mm Pitch - L Double Sided -19mm
Belts - Timing -  9.525mm Pitch - L Double Sided -19mm

Search Rating: 100%

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Belts - Timing - 9.525mm Pitch - L Double Sided -19mm.

Power Tool Parts

TopHide Pictures

KA85 Belt Sander Black and Decker Parts
KA85 Belt Sander Black and Decker Parts

Search Rating: 99%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of KA85 Belt Sander Black and Decker Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of KA85 Belt Sander Black and Decker Parts.

Washers Flat Fibre

TopHide Pictures

Washers - Flat - Fibre
Washers - Flat - Fibre

Search Rating: 99%

Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic

Flat red vulcanised fibre washers. Black available on request and sufficient quantity.

Operating temperature up to 105 oC. Tensile strength 6 kg/mm2. Elongation up to 19 percent. Shrinkage up to 3 percent thickness. Water absorption 4 to 70 percent after 24 hours. Density 1 to 1.45 g/cm.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Fibre.

Washers Flat Metallic

TopHide Pictures

Washers - Flat - Aluminium
Washers - Flat - Aluminium

Search Rating: 99%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Aluminium.

Washers - Flat - Brass - Commercial
Washers - Flat - Brass - Commercial

Search Rating: 99%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Please note! Tolerances for commercial grade washers are much larger than for precision washers. In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Brass - Commercial.

Washers - Flat - Brass - Precision
Washers - Flat - Brass - Precision

Search Rating: 99%

Also see combined categories:
All Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Precision Tolerances. Laminated brass shim washers.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Brass - Precision.

Washers - Flat - Carbon Spring Steel - Precision Shim
Washers - Flat - Carbon Spring Steel - Precision Shim

Search Rating: 99%

Also see combined categories:
All Precision Shim Washers
All Flat Washers and Spacers - Metallic

Flat Carbon Spring Steel Washers. Commonly used for fast and accurate spacing of milling cutters, gang cutters, saws, slitting blades and grinding tools.

C1010 steel types best suited to arbor shimming.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Carbon Spring Steel - Precision Shim.

Washers - Flat - Hardened Steel
Washers - Flat - Hardened Steel

Search Rating: 99%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Medium carbon steel through hardened to RC 43-49. Zinc dichromate finish. All dimensions shows are minimum.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Hardened Steel.

Washers - Flat - High Tensile
Washers - Flat - High Tensile

Search Rating: 99%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Grade 8 high tensile washers

ASTM F436 1985. Please note! Tolerances for commercial grade washers are much larger than for precision washers.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - High Tensile.

Washers - Flat - Mild Steel
Washers - Flat - Mild Steel

Search Rating: 99%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers. Includes fender washers. Zinc plated and unplated listings.

In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Mild Steel.

Washers - Flat - Sintered Bronze - Precision
Washers - Flat - Sintered Bronze - Precision

Search Rating: 99%

Also see combined categories:
All Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat thrust washers made from oil impregnated sintered bronze


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Sintered Bronze - Precision.

Washers - Flat - Stainless Steel 304 - Commercial
Washers - Flat - Stainless Steel 304 - Commercial

Search Rating: 99%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Stainless Steel 304 - Commercial.

Washers - Flat - Stainless Steel 316 - Commercial
Washers - Flat - Stainless Steel 316 - Commercial

Search Rating: 99%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Stainless Steel 316 - Commercial.

Washers - Flat - Stainless Steel - Precision Shim
Washers - Flat - Stainless Steel - Precision Shim

Search Rating: 99%

Also see combined categories:
All Precision Shim Washers
All Flat Washers and Spacers - Metallic

Precision Tolerances.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Stainless Steel - Precision Shim.

Washers - Flat - Stamped - Heavy Duty - Hardened
Washers - Flat - Stamped - Heavy Duty - Hardened

Search Rating: 99%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Heat treated. Black oxide finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Stamped - Heavy Duty - Hardened.

Washers - Flat - Titanium - CP Grade 1
Washers - Flat - Titanium - CP Grade 1

Search Rating: 99%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Commercially pure for general industrial corrosion applications. UNS R50250. Please note! Tolerances for commercial grade washers are much larger than for precision washers. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Titanium - CP Grade 1.

Washers Flat Plastic

TopHide Pictures

Washers - Flat - Nylon
Washers - Flat - Nylon

Search Rating: 99%

Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic

Flat washers.

Please note! Tolerances for commercial grade washers are much larger than for precision washers. In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Nylon.

Washers - Flat - PTFE
Washers - Flat - PTFE

Search Rating: 99%

Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic

Teflon Washers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - PTFE.

Washers - Flat - PVC
Washers - Flat - PVC

Search Rating: 99%

Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic

Flat washers.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - PVC.

Washers Flat Rubber

TopHide Pictures

Washers - Flat - Rubber
Washers - Flat - Rubber

Search Rating: 99%

Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic

Nitrile Duro 70


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Rubber.

Seals and Sealing

TopHide Pictures

Seals - Flat Gasket - Rubber
Seals - Flat Gasket - Rubber

Search Rating: 99%

Neoprene and natural rubber gaskets for sealing doors and many other applications.

Meet NEMA 12 to NEMA 4X applications. Easy to install with self adhesive backing. Easily cut to size and shaped for many applications. Fibre backing helps to eliminate stretching and helps to maintain seal in position.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Seals - Flat Gasket - Rubber.

Power Tool Parts

TopHide Pictures

BSG-151 Belt Sander Ozito Parts
BSG-151 Belt Sander Ozito Parts

Search Rating: 99%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of BSG-151 Belt Sander Ozito Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of BSG-151 Belt Sander Ozito Parts.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



PRODUCTS

Accessories Air Springs Allthread Angle Assortments Backup Rings Ball Joints Ball Parallels Ball Screws Ball Splines Linear Ball Transfers Balls Bar Batteries Bearings Acetal Bearings Angular C... Bearings Ball Bearings Conveyor Bearings Grooved P... Bearings Housings Bearings Hydrodynamic Bearings Linear Bearings Mounted Bearings Needle Ro... Bearings One Way C... Bearings PEEK Bearings Pivot Bearings Plates Bearings Press In Bearings Scale Bearings Thrust Bearings and Housi... Bearings for Denta... Bearings for Housings Bearings for Skating Bearings for Wheel... Belts PosiDrive Belts Rounthane Books

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Bottles and Cans Brushless Motor Be... Bumpers Bungs Bushes Bronze Bushes Plastic Bushes Steel Bushings Spherical Cable Cable Ties Cam Followers Cams Carburettor Parts Carousels Castors Catches Ceramic Bearings Chain and Sprocket... Chain and Sprocket... Channel Circlips Clamping Bushings Clamping Rings Clamps Clevis Joints Clips Clutches Collars Collectibles Couplings Bellows Couplings Helical ... Couplings Insert a... Couplings Other Couplings Rigid Cross Blocks Dampers Dental Bearing Kits Dental Handpiece P... Disk Cleaning Machine Drylin Bearings an...

Visa Card Accepted
Visa
Secure Checkout


Dual Eye Joints Dual Vee Bearings Easy Selection Kits Educational Projects Enclosures Engineering and Ho... Eyebolts Fastening Bushings Fishing Reel Parts Flexible Shaft Food Processor Parts Framing Fuel Games Amusement Games General Gas Springs Gear Blanks Gear Racks Circula... Gear Racks Flexible Gearbox Output Shafts Gearbox Parts Gearboxes Cross Axis Gearboxes Educatio... Gearboxes Inline Gearboxes Inline E... Gearboxes Offset Gearboxes Right Angle Gearboxes Tee Gearheads Inline Gearmotors Basic Gearmotors DC Gearmotors Open Gears Cluster Gears Imperial Ant... Gears Imperial Bevel Gears Imperial Hel... Gears Imperial Int... Gears Imperial Mitre Gears Imperial Racks Gears Imperial Spur

Master Card Accepted
Mastercard
Secure Checkout


Gears Imperial Worms Gears Metric Bevel Gears Metric Helical Gears Metric Internal Gears Metric Mitre Gears Metric Racks Gears Metric Spira... Gears Metric Spira... Gears Metric Spur Gears Metric Stem Gears Metric Worms Handles Handpiece Parts Hobby Accessories Hobby Gears Hobby Servo Motors Hobby Wheels Hoist Rings Hooks Housings Linear w... Housings Linear w... Housings with Inte... Hubs ISOPADS Insulators Isolators Jigsaws Jockey Wheel Thrus... Keys Keys and Keysteel Knobs Ball Knobs Cabinet Knobs Cross Knobs Knurled Knobs Lever Knobs Lobe Knobs Mushroom Knobs Oval Knobs Precision Knobs Round

Pay By
Phone after Checkout
07 3275 2097
International +61 7 3275 2097


Knobs Star Knobs Thumb Knobs Tri Knobs Wing Lanyards Latches Lazy Susans Leadscrews Lifting Chain Lights Linear Slides Locking Compounds Lubricants General... MRI Table Bearings Magnets Alcomax Magnets Alnico Magnets Ceramic Magnets Cup Magnets Rare Earth Marking Measuring Equipment Measuring Gauges Medical Motors DC Motors Stepper Motors Vibrating Mounts Base Mounts Bonded Mounts Centrebolt Mounts Conical Mounts Cup Mounts Cylindrical Mounts Leveling Mounts Machinery Mounts Plate Mounts Rectangular Mounts Wedge Nuts Nuts Lock ORings

Amex Accepted
Amex
Secure Checkout


ORings for Dental ... Oil Seals Packing Boxes and ... Parts Boxes Pillars Pinion Wire Imperial Pinion Wire Metric Pins Ball Lock Pins Clevis Pins Cotter Pins Dowel Pins General Pins Pull Pins Roll Pins Taper Pins Wirelock Pins Locating Plungers Ball Plungers Indexing Plungers Spring Positioning Power Tool Parts Pressure Rollers Protective Packing... Pulley Blocks Pulleys Grooved Pulleys Idler Pulleys Vee Punches Pushbike Bearings Ratchets and Pawls Robotic Wheels Rod Ends Rollers Screws Button Head Screws Cap Head Screws Captive Screws Cheese Head Screws Coach Screws Countersunk

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Screws Hex Head Screws Large Head Screws Pan Head Screws Panel Screws Round Head Screws Security Screws Self Tapping Screws Shoulder Screws Socket Set ... Screws Square Head Screws Thumb Screws Wood Sealing Plugs Seals and Sealing Sets Shaft Extenders an... Shafting Aluminium Shafting General P... Shafting Precision... Shaftloc Sheet Shim Shock Absorbers Sleeves Snap Buttons Snaps Soldering Spacers Special Effects Li... Splined Shafts and... Spring Anchors Spring Mounts Spring Washers Spring Wire Springs Compression Springs Constant F... Springs Die Springs Disc Springs Extension Springs General

Visa Card Accepted
Visa
Secure Checkout


Springs Torsion Spur Gear Stock Im... Spur Gear Stock Me... Spur Gears Circula... Square Shaft Stationery Stays Stops Spring Strip Strips Stroke Rotary Bush... Studs Suction Cups Surplus Stock Swimming Pool Bear... Switches Tape Tee Joints Tension Bushings Tensioners Thread Thread Inserts Threaded Rod Timing Belt Lengths Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Tips Tolerance Rings Tooling Balls

Master Card Accepted
Mastercard
Secure Checkout


Tools Bending Tools Bits Tools Circlip Tools Cutting Tools Deburring Tools General Purpose Tools Measuring Tools Pullers Tools Screw Drivers Tools Screw Extrac... Tools Threading Tube and Tubing Turntables Universal Joints VRings Vacuum Cleaner Belts Vee Belts Washers Aligning Washers Finishing Washers Flat Fibre Washers Flat Metallic Washers Flat Plastic Washers Flat Rubber Washers General Washers Lock Washers Locking Washers Serrated L... Washers Shoulder Washers Square Washers Thrust Wear Strips Wheels Industrial Wrenches Yoke Ends

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 114228 products in 2801 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.